51 owners in the United States reported problems with the seat belts of this car to NHTSA (model years 1990–1993). Most often named: front:buckle assembly (29%), front:anchorage (16%). Reported consequences: 13 crashes, 12 injuries, 2 deaths.
✓ Mecafile analysis of official data1990–1993View details →
31 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1990–1993), typically at around 110,000 miles. Most often named: wiring:front underhood (35%), ignition (16%). Reported consequences: 17 fires.
✓ Mecafile analysis of official data1990–1993View details →
28 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 1990–1993), typically at around 155,000 miles. Most often named: engine:gasoline (50%), engine (39%). Reported consequences: 1 crash, 6 fires, 2 injuries.
✓ Mecafile analysis of official data1990–1993View details →
23 owners in the United States reported problems with the brakes of this car to NHTSA (model years 1990–1993), typically at around 202,000 miles. Most often named: foundation components (26%), foundation components:disc:pads (26%), foundation components:disc:rotor (22%). Reported consequences: 5 crashes, 3 injuries.
✓ Mecafile analysis of official data1990–1993View details →
18 owners in the United States reported problems with the fuel system of this car to NHTSA (model years 1990–1993), typically at around 120,000 miles. Most often named: fuel injection system (44%), delivery:fuel pump (17%), fuel injection system:injectors (17%). Reported consequences: 5 fires.
✓ Mecafile analysis of official data1990–1993View details →
In the brake booster, the strength of the vacuum pump sprocket is insufficient, so the teeth of some sprockets wear abnormally. If use continues as is, the vacuum pump chain may ride up onto the teeth of the sprocket and become caught between it and the chain guide, locking the rotation of the rear cam sprocket. In the worst case, the chain may break, or the rear cam sprocket bolt may fracture, causing the brake booster to stop operating and the brakes to become less effective.
Nissan: Vent control valve replacement. When replacing the evap canister vent control valve for reason: Use the one listed on page 2; for vent control valve replacement procedure, refer to the appropriate section of the electronic service manuals (esm; when installing the new valve, do not add any lube to its o ring; for frontier (d40 series) only, install the protector listed in parts information. *pe includes 2005-09 frontier. Updated 12/8/10. *pe
NHTSA · manufacturer bulletin10032506Model years 2002View details →
Nissan: Exterior lamp fogging. Occasionally water is noticed in the exterior lamps. This is generally not due to a defect. All current exterior lamp assemblies are vented to the atmosphere (not sealed). This is necessary to allow for expansion and contraction of air from temperature variations (warmer or colder) without damage to the lamp. Moisture in the air sometimes travels into and out of the lamp assembly through these vents. Certain environmental conditions may cause moisture to condense. The fogging/cloudiness should disappear over time when the lamp is in a dry environment. No models listed. *pe updated 5/7/10. *pe updated 12/9/13. *pe
NHTSA · manufacturer bulletin10032306Model years 2002View details →
Nissan: Tire pressure monitoring system (tpms) warning light on/flashing. No models or model years listed. *pe updated on 08-11-2011. *kb
NHTSA · manufacturer bulletin10031305Model years 2002View details →
Latest forum threads
No discussion yet.
Defects and discussions are filed under a generation: pick one above to add yours.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).