Stalling (US safety investigation)
NHTSA, the US road safety agency, opened an engineering analysis (EA87022) into this problem on 27 August 1987 for 1986–1987 models; it was closed on 27 November 1991 without a recall.
🔔 Create a free account to get email alerts about Oldsmobile Toronado (all generations)
Everything about the Oldsmobile Toronado, all generations together: defects, recalls, service bulletins and discussions. Pick a generation to narrow it down.
NHTSA, the US road safety agency, opened an engineering analysis (EA87022) into this problem on 27 August 1987 for 1986–1987 models; it was closed on 27 November 1991 without a recall.
NHTSA, the US road safety agency, opened an engineering analysis (EA88036) into this problem on 22 July 1988 for 1982–1985 models; it was closed on 30 August 1991 without a recall.
NHTSA, the US road safety agency, opened an engineering analysis (EA88036) into this problem on 22 July 1988 for 1986–1988 models; it was closed on 30 August 1991 without a recall.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE93088) into this problem on 7 October 1993 for 1992 models; it was closed on 28 February 1994 without a recall.
10 owners in the United States reported problems with the brakes of this car to NHTSA (model years 1989–1992). Most often named: antilock/traction control/electronic limited slip (80%). Reported consequences: 1 crash.
On certain toronado trofeo's the front outer shoulder belt web sew stop may become stuck in the retractor. This could make the belt difficult to pull out of the retractor, and some occupants may be unable to fasten the belt. In the event of a crash, unbelted occupants are at a significantly higher risk of injury than those who are belted. Correction: A webbing stop button will be installed on affected vehicles.
The front outer shoulder belt web sew stop can become stuck in the retractor. The belt can be difficult to pull out of the retractor and some occupants may not be able to fasten the belt.
The intermediate shaft to steering rack lower coupling pinch bolt may be missing. This could result in shaft disengagement and loss of steering control. Correction: Vehicles will be inspected and, if necessary, a pinch bolt will be installed.
Owners of some vehicles equipped with hydra-matic 3t40, 4t60, 4t60-e or 4t65-e transaxles may comment on a grinding and / or growling noise that is noticeable when standing in park on a hill or slope with the engine running and the parking brake not applied. *tt
Some vehicles equipped with hydra-matic 3t40, 4t60 or 4t60-e transxales may comment on a grinding and / or growling noise that is noticeable when in park on incline. *tt
Grinding and/or growling noise in park on incline.*sd
Defects and discussions are filed under a generation: pick one above to add yours.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).