When the driver's airbag is deployed, the housing of the inflator may crack due to excessive pressure from the inflation system. For this reason, a STOP DRIVE has been issued as of 21 October 2025.
rdwSep 16, 2025MGP250299Model years 2005–2009Auto-translated · original: DutchView details →
Due to inappropriate material used for the fuel tank vent hose (breather hose), some of these hoses deteriorate from ozone exposure and develop cracks. Therefore, if the vehicle continues to be driven as is, fuel may leak when the tank is filled to capacity.
Audio system head unit (manufacturer: Sony Corporation, model: XR-5H911, XR-5H912): On the wiring board of the audio unit, the board manufacturing process was improper, so some capacitors are damaged. If the vehicle continues to be used in this state, the terminals of the affected capacitor may short-circuit, causing excessive current to flow to the speakers and generating heat. In the worst case, this could lead to a fire.
In the wiring board of the audio unit's main body, some capacitors have been damaged because the board's manufacturing process was improper. If use continues in this state, the terminals of the capacitor may short-circuit, causing excessive current to flow to the speakers, and in the worst case, there is a risk of leading to a fire.
During the installation process of the driver's airbag, some connectors of the wiring linking the airbag initiator (inflator) and the airbag control unit were not fully locked. If the vehicle continues to be used in this condition, the connector may loosen and the airbag may fail to deploy.
In the engine, the shape of the engine oil spray nozzle of the timing chain lubrication system is inappropriate. If the vehicle continues to be used in this condition, the timing chain may experience inadequate lubrication, and in the worst case, the timing chain may break.
In the engine, improper bonding of the vibration-damping rubber ring section of the crankshaft pulley may cause the bonded surface to peel off, producing abnormal noise. If use continues in this condition, the belt may come off the pulley, increasing the steering effort, and if the belt gets caught at the pulley mounting area, the engine may stop and may be unable to restart.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).