Brake System Other
Recall due to the possibility that moisture may enter the ABS module through the ground wiring of the ABS module, which could cause an electrical short inside the ABS module and potentially result in a fire.
🔔 Create a free account to get email alerts about Renault Fluence I
Recall due to the possibility that moisture may enter the ABS module through the ground wiring of the ABS module, which could cause an electrical short inside the ABS module and potentially result in a fire.
실내좌석 내장재의 난연성이 안전기준에 부적합하여 화재가 발생되었을 때 화염전파 속도가 빨라 인명 또는 차량의 피해를 확산시킬 우려
Recall due to the possibility that the purge control valve may not fully close, caused by a mold quality issue at the supplier that manufactures the valve, which could affect exhaust emissions.
Recall due to the possibility of engine stalling in extreme conditions, such as when the engine load becomes extremely high from use of the air conditioner, electrical device load, or friction between parts due to aging. In these cases, there is a mode in which the engine torque compensation value is insufficient for a sudden drop in engine speed (RPM), which may cause the engine to stall. <*Production dates of affected vehicles> SM3: 2012.06.19~2013.06.03 SM3: 2013.03.26~2014.04.07 SM3: 2014.02.27~2019.08.19
대기압센서가 정상작동 중임에도 차량의 ECU 센서 작동 불량으로 오진단하는 경우가 발생될 수 있는 가능성에 따른 리콜
캐니스터 퍼지 밸브의 작동시 특정조건에서 적절하지 않은 연료보정으로 공연비 불량이 발생할 가능성에 따른 리콜
A recall due to possible soldering defects inside water temperature sensors: poor management of the solder bath used by a parts manufacturer to weld water temperature sensors allowed residue to accumulate inside the bath. As a result, the sensor that monitors the bath temperature lost sensitivity and read lower than the actual bath temperature. Because of this, the bath exceeded its upper temperature limit, creating the possibility of poor solder joints inside the water temperature sensors.
null Due to insufficient tightening of the wheel bolts, a wheel may be lost while driving.
A manufacturing defect in which, in an extremely rare number of the affected production vehicles, the engine mount fixing bolts may break due to bolt walk-out caused by insufficient tightening torque.
뒷쪽 범퍼에 장착되어 있는 후부반사기가 안전기준을 만족하지 못함으로 인하여 야간에 후방 운행 타 차량 운전자가 주차된 해당 차량을 인식 하는데 어려움을 줄 가능성이 확인된 제작결함
에어백 제어장치 불량으로 운전석 에어백이 작동되지 않을 가능성이 발견됨
후부반사기의 반사성능이 안전기준에 부적합한 결함이 발견됨
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).