Risk of a fuel leak in the engine compartment
Risk of a fuel leak in the engine compartment.
🔔 Create a free account to get email alerts about Renault Kangoo (all generations)
Risk of a fuel leak in the engine compartment.
エンジンルーム内の燃料ホースにおいて、当該ホースの長さが不適切なため、走行中の振動により燃料ホースとエンジンマウントが干渉するものがある。そのため、そのままの状態で使用を続けると、燃料ホースが摩耗し、最悪の場合、燃料が漏れるおそれがある。
In the engine compartment, some fuel hoses interfere with air-conditioning pipes because the routing instructions for the fuel hoses are inappropriate. If the vehicle continues to be used in this condition, the fuel hoses may wear and fuel may leak.
The near side rear seat belt upper mounting bolt may not have been tightened to the correct specification. In the event of an accident the belt may be insecure and not act as intended.
De achterste zitbank (3e rij) vergrendelt mogelijk niet goed.
エンジンルームにおいて、燃料ホースの取り回しの指示が不適切なため、燃料ホースとエアコンパイプが干渉するものがある。そのため、そのままの状態で使用を続けると、燃料ホースが摩耗して燃料が漏れるおそれがある。
De brandstofleiding kan in contact komen met de naastgelegen aircoleiding en daardoor doorslijten.
原動機室内に燃料パイププロテクタが装着されていない車両について、衝突時の燃料漏れのおそれをより少なくするため、燃料パイププロテクタを追加する。(基準不適合ではないが、安全性向上を目的とするもの)
燃料タンクに2ヶ所装備されている、燃料蒸発ガス排出バルブの一方において、取付位置が不適切なため、燃料満タン時に、振動により当該バルブ内へ燃料が浸入すると、燃料タンク内の内圧によって当該バルブを通って燃料が漏れ出るおそれがある。
There is a possible issue with the security of the lower seat belt mounting bolt which could cause it to loosen. If this were to occur then the bolt could ultimately fully unwind and detach. This could result in the occupant not being restrained by the seat belt in the event of a collision.
It has been identified that the possibility exists that the front brakes hoses may become disconnected resulting in a loss of brake hydraulic fluid and a reduction in braking efficiency.
樹脂製燃料パイプとデリバリパイプ(インジェクションレール)の継ぎ手部の締結構造が不適切なため、当該継ぎ手の嵌合が緩むことがある。そのため、そのまま使用を続けると、原動機の振動等により、当該継ぎ手が外れ、燃料が漏れるおそれがある。
On certain vehicles the rear swing door strikers have a prominent character. Injuries may occur when entering or exiting from the rear of the vehicle (e.g. during loading or unloading).
The rear swing door protrudes when the doors are open, particularly when entering or exiting the rear of the vehicle, for example during loading or unloading operations. This may result in a risk of head injury for users.
In the engine's fuel injection system, the plating process on the injector rail is improper, so the plating may peel off during use. As a result, the peeled plating can clog the injectors, worsening the air-fuel ratio and lighting the engine warning light. If the vehicle continues to be driven in this condition, it may fail to meet exhaust emission standards.
For certain vehicles there is an issue involving the conformity of the four hinges of the rear doors for where a missing shaft cannot be ruled out.
Le cadre de base du siège avant est défectueux et le système de retenue du siège enfant fonctionne mal, ce qui augmente le risque de blessure en cas d’accident.
Les éléments de l’essieu arrière peuvent ne pas être suffisamment serrés. en conséquence, les roues arrière peuvent être verrouillées ou désengagées, ce qui augmente le risque d’accident.
In engines, improper design of the crankcase internal pressure during deceleration can cause the cylinder pressure to become lower than the crankcase pressure during deceleration, so blow-by gas containing engine oil may flow back into the combustion chamber. As a result, large amounts of carbon can build up on the piston and then peel off, becoming lodged between the exhaust valve and valve seat. This allows high-temperature combustion gas to leak, may burn out the exhaust valve, and in the worst case, the warning light may illuminate while driving and engine output may drop.
エンジンのブローバイ・ガス還元装置において、インテークマニホールド製造機器の管理が不適切なため、ブローバイガス吸気口が閉塞しているものがある。そのため、未燃焼ガスがインテークマニホールドに流入せず、クランクケース内圧が上昇し、エンジン不調やオイルレベル警告灯が点灯して、最悪の場合、エンジンが損傷するおそれがある。
The components on the rear axle may not be sufficiently clamped. As a result, the rear wheels may become locked or disengaged, increasing the risk of an accident.
Inadequate tightening of the rear hub nuts and potentially of the calliper fixing screws on the left and right side
La fonction «stop & start» peut ne pas fonctionner correctement.
The STOP&START function does not perform correctly.
Le convertisseur catalytique n’a pas été soudé correctement.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).