The ECU controlling the airbag and seat belt tensioner functions may be affected by the ingress of moisture. Should corrosion subsequently occur in the printed circuit this could result in malfunction of these systems and in extreme cases cause inadvertent deployment of the airbag or seat belt tensioners.
DVSA · United KingdomJul 5, 1999R/1999/054Model years 1992–1994View details →
As a result of water penetration corrosion may be present on the brake pressure warning switch connection. This could result in the loss of braking system pressure and may also negate the ABS function.
DVSA · United KingdomJun 26, 1995R/1995/045Model years 1991–1993View details →
A slightly downward low energy impact could result in breakage of the engine oil cooler hose and/or housing. Leaking oil from the oil cooler can be ignited by a hot exhaust manifold or turbocharger resulting in an engine compartment fire. Correction: A protective cover will be installed over the oil cooler.
Transport CanadaJul 29, 19941994125Model years 1992–1994View details →
During low energy frontal impact collisions, the front crossmember can contact the metal tubing portion of the cooler hose assembly; and/or the hose assembly can break and leak oil onto the hot exhaust manifold or the turbocharger.
NHTSA · United StatesJul 8, 199494V126000Model years 1992–1994View details →
Cracks can develop in the two (2) rubber hoses that connect the fuel tank with the plastic pipes which go to the fuel filler housing. This could result in fuel leakage and, in the presence of an ignition source, a fire could occur. Correction: Dealers will replace the hoses and replace the clamps with new style clamps that have a protective inner layer.
Transport CanadaApr 27, 19941994082Model years 1992–1993View details →
Abrasion on the printed circuit card in the combination neutral safety/backup lamp switch operated by the automatic transmission gear selector may cause residue to collect in electrical area on the circuit card.
NHTSA · United StatesNov 2, 199090V001000Model years 1986–1990View details →
Note: Vehicles with automatic transmission residue on the circuit card may cause an electrical short in the back-up lamp circuit and eventual overheating of the combination safety/back-up lamp switch assembly. If this should occur, smoke or possibly a fire might develop from the center console area in the passenger compartment. Correction: An electrical circuit, including a relay, will be added to the back-up lamp circuit. This will reduce the maximum electric current that can flow through the combination switch in the gear selector.
Transport CanadaMar 6, 19901990042Model years 1987–1990View details →
On vehicles with automatic transmission and anti-lock braking system (abs) the throttle/kick-down cable and gear selector wire may come loose and rub against any of the three steel brake lines connected to the valve block of the abs system hydraulic brake unit. Chafing damage could result in loss of brake fluid and partial loss of braking force with a subsequent increase in stopping distance. Correction: Routing of the throttle/kick-down cable will be changed and a new attachment bracket will be installed. Brake lines and valve block will be inspected for chafing and chafed brake lines will be replaced.
Transport CanadaNov 24, 19891989159Model years 1988–1989View details →
A condition may exist whereby the wiring harness may chafe against the windshield wiper motor bracket. This could result in a short circuit and a possible vehicle fire. Correction: Rubber protective strips will be installed on the edges of the windshield wiper motor bracket to prevent this condition.
Transport CanadaOct 27, 19861986121Model years 1986View details →
The wiring harness may chafe against the windshield wiper motor bracket. Consequence of defect: If a short circuit develops, it could result in a fire.
NHTSA · United StatesOct 27, 198686V143000Model years 1986View details →
On certain vehicles, moisture could enter the air bag electronic control module and cause corrosion on portions of the ECM printer circuit boards. This condition can, in extreme cases, create open connections in circuits controlling air bag deployment with the possibility of inadvertent air bag and/or pretensioner deployment. Correction: Dealers will inspect the electronic control module and install a protective cover over the module to prevent moisture from entering.
Transport CanadaJun 8, 19991999114Model years 1992–1994View details →
Vehicle description: Passenger vehicles. Moisture can enter the air bag inflatable restraint electronic control module (ecm) and cause corrosion on portions of the ecm printer circuit boards.
NHTSA · United StatesMay 6, 199999V109000Model years 1992–1994View details →
These vehicles do not comply with c.M.V.S.S. 213 - child restraint systems. The child safety seat mounting on the parcel shelf does not comply to the requirements of the standard due to incorrect spot welds. In the event of an accident, the child seat could come loose, causing injuries to the child. Correction: Parcel shelf and support plate will be replaced on affected vehicles.
Transport CanadaOct 20, 19951995187Model years 1995View details →
ON VEHICLES EQUIPPED WITH "MkII" ABS BRAKING SYSTEM, MOISTURE MAY FOLLOW THE WIRING TO THE PRESSURE WARNING SWITCH ON THE ABS UNIT WHICH CAN CAUSE CORROSION TO BUILD UP ON THE CONNECTION TERMINAL. A MALFUNCTION COULD CAUSE A LOSS OF POWER ASSISTANCE. CORRECTION: IF THE SWITCH CONNECTION PINS ARE CORRODED, THE SWITCH WILL BE REPLACED. ON ALL AFFECTED VEHICLES, THE SWITCH CONNECTION WILL BE SPRAYED WITH A COATING AND SHRINK SLEEVE WILL BE APPLIED TO SEAL THE CONNECTION FROM WATER.
Transport CanadaJun 22, 19951995114Model years 1992–1994View details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).