In the driver's seat airbag system, some control units have a poorly soldered shock wave sensor inside. Cracks may form at the solder joints, which can cause the airbag warning light to illuminate. Therefore, if the vehicle is left in this condition and receives a strong impact, such as hitting the horn very hard or passing over a deep depression, the airbag may deploy.
On certain vehicles, the front tow hook may contact curbing, dips, speedbumps, potholes etc. and cause inadvertent air bag deployment. Correction: Front tow hooks will be removed on affected vehicles.
Transport CanadaFeb 15, 19991999020Model years 1995View details →
Vehicle description: Passenger vehicles. Inadvertent air bag deployment can occur after undercarriage contact of the tow hooks with curbs, dips, speedbumps, potholes, etc.
NHTSA · United StatesDec 11, 199898V315000Model years 1995–1996View details →
A weld fracture may occur on the hanger bracket of the front transverse links. This could result in separation of the bracket with subsequent failure of the lower suspension mounting and loss of vehicle control. Correction: Front transverse links will be inspected and replaced if necessary.
Transport CanadaMay 25, 19981998107Model years 1996–1997View details →
Vehicle description: Passenger station wagon, sedan and sport utility vehicles. Due to improper welding, fractures can occur on the support bracket of the front transverse link.
NHTSA · United StatesMay 4, 199898V091000Model years 1996–1997View details →
Vehicle description: Passenger vehicles. The throttle shaft ball bearing on the sensor side of the throttle body assembly was not installed in certain throttle bodies.
NHTSA · United StatesFeb 20, 199898V035000Model years 1997View details →
Vehicle description: Passenger vehicles equipped with automatic transmissions. Due to poor welds, ignition keys can stick, shift levers/linkages can break and shift levers can move.
NHTSA · United StatesFeb 20, 199898V042000Model years 1997View details →
The automatic transmission shift lever assemblies on these vehicles may fail due to poor welds within the assembly. This can result in stuck ignition keys, broken shift levers/linkages and improper movement of shift levers. Correction: Automatic shift lever assembly will be replaced with one furnished by a different supplier.
Transport CanadaFeb 19, 19981998030Model years 1997View details →
The throttle shaft ball bearing on the sensor side of the throttle body assembly may not have been installed on these vehicles. This could eventually lead to incomplete return of the throttle valve and consequently a high idling condition. Correction: Throttle body will be inspected and if the bearing is missing, the throttle body will be replaced.
Transport CanadaFeb 19, 19981998029Model years 1997View details →
The hazard warning flasher button can bind in the housing causing continued operation of the hazard warning lamps, or their being turned off but the turn signals becoming inoperable. Correction: Dealers will install a modified hazard warning switch.
Transport CanadaNov 18, 19971997200Model years 1997View details →
Vehicle description: Passenger vehicles. Insufficient clearance within the hazard warning light switch housing can cause a binding between the actuating button and the housing.
NHTSA · United StatesNov 13, 199797V210000Model years 1997View details →
Certain passenger vehicles equipped with front coil springs.The front coil springs were produced with poor paint quality which, after continued exposure to corrosive salt, can result in breakage of the spring. Depending on the location of the fracture, a broken spring could move past the spring seat and contact a front tire. Some tires have deflated due to contact with a broken spring. Correction: Dealers will notify customers to bring their vehicle to an authorize dealership to have a spring guard installed on both front struts to prevent tire puncture and replace any broken springs free of charge.
Transport CanadaJul 3, 20012001183Model years 1995–1997View details →
Vehicle description: Passenger vehicles equipped with front coil springs originally sold in or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new york, new jersey, new hampshire, ohio, pennsylvania, rhode island, vermont, virginia, west virginia, and wisconsin, and in the district of columbia. The front coil springs were produced with poor paint quality which, after continued exposure to corrosive salt, can result in breakage of the spring.
NHTSA · United StatesJun 25, 200101V216000Model years 1995–1997View details →
Certain vehicle do not comply with Regulation 6 - Statement of Compliance. Compliance label was not expressed in both official languages in regard to vehicle classification. Correction: No corrective action will be taken for existing vehicles. Correct compliance label will be affixed in current production vehicles.
Transport CanadaMar 17, 20002000069Model years 1996–1997View details →
MLIT · JapanOct 21, 19971104884Model years 1996Shown in the original Japanese · translation pendingView details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).