ハンドル
ステアリングホイールにおいて、ステアリングコラムとの取付け作業が不適切なため、走行中の操舵等の入力により、取付けナットが緩み、嵌合部にガタが発生するものがある。そのため、そのままの状態で使用を続けると、ガタが大きくなり、最悪の場合、当該嵌合部が外れ、ハンドル操作ができなくなるおそれがある。
🔔 Create a free account to get email alerts about Subaru Pleo Plus (all generations)
ステアリングホイールにおいて、ステアリングコラムとの取付け作業が不適切なため、走行中の操舵等の入力により、取付けナットが緩み、嵌合部にガタが発生するものがある。そのため、そのままの状態で使用を続けると、ガタが大きくなり、最悪の場合、当該嵌合部が外れ、ハンドル操作ができなくなるおそれがある。
In the front seats, the mounting bolts were not tightened properly, so some of these bolts may loosen due to vibration during driving. As a result, abnormal noise may occur from the mounting area, and if use continues as is, the bolts may fall out. In the worst case, the seat could move in a collision, and the occupant protection performance it is meant to provide may not be achieved.
In the fuel pump impeller (resin impeller), improper molding conditions can result in low resin density, causing the impeller to swell and deform when exposed to fuel. As a result, the impeller may come into contact with the pump case, causing the fuel pump to malfunction and, in the worst case, potentially leading to engine stall while driving.
In the fuel pump impeller (resin impeller), improper molding conditions can lead to low resin density, causing the impeller to swell and deform when exposed to fuel. As a result, the impeller may come into contact with the pump case, causing the fuel pump to malfunction and, in the worst case, potentially leading to engine stalling while driving.
The rear brake self-adjuster mechanism (strut set) that automatically adjusts the clearance between the brake shoes and drum has an issue: due to improper management of the grease application equipment during parts assembly, some units have insufficient grease applied to the threaded surface of the adjuster bolt. If the vehicle continues to be used in this condition, the threaded surface may rust and seize, and the automatic adjustment mechanism may stop functioning.
In the automatic adjustment mechanism (strut set) that maintains the gap between the shoes and drum of the rear brakes, some adjuster bolts have not had grease applied to their threaded surfaces due to improper grease application during parts assembly. If such vehicles continue to be used in this condition, the threaded surfaces may rust and seize, and the automatic adjustment mechanism may stop functioning.
In a continuously variable transmission (CVT) torque converter, improper manufacture of the internal bearing leaves unevenness on the sliding surface. During use, this unevenness can cause the bearing to wear abnormally and break. Fragments of the bearing then scatter inside the torque converter and produce abnormal noise. If the vehicle continues to be driven in this condition, the fragments may, in the worst case, become lodged inside the torque converter, causing the engine to stall when the vehicle stops and preventing it from moving off again.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).