The engine computer may control the air-fuel ratio improperly when the air-fuel ratio (the ratio of air to fuel) sensor circuit, which detects the oxygen concentration in the exhaust gas, malfunctions. For example, if the sensor's internal wiring breaks, an appropriate air-fuel ratio may no longer be achieved. If the vehicle continues to be driven in this condition, the catalytic converter may overheat abnormally and be damaged when the wire is broken, and in the worst case, may lead to a fire.
In certain engines, the amount of adhesive applied between the outer ring of the crankshaft pulley and the vibration-damping rubber is insufficient. As a result, the bonded area may peel apart, causing the outer ring of the pulley to slip and rotate idly. This can produce abnormal noise or cause the charging warning light to illuminate. In the worst case, the power steering pump belt may come off, which could suddenly increase the steering effort required.
In the carbon monoxide emission control device, the internal wiring of the air-fuel ratio (the ratio of air to fuel) sensors installed on the left and right exhaust manifolds, which detect the oxygen concentration in the exhaust gas, may become disconnected. If use continues in this state, the sensor will stop sending signals, an appropriate air-fuel ratio can no longer be maintained, the catalytic converter may overheat and be damaged, and exhaust emission values may exceed the standard values.
MLIT · JapanFeb 22, 19941104290Model years 1991–1992Shown in the original Japanese · translation pendingView details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).