Lectura libre · cuenta gratuita para colaborarSucesor de Anticars (2000)

Bentley Arnage

1998–2009 · 1 generaciones · 0 averías documentadas · 2 mercados
Generaciones
Todas las generacionesArnage1998–20093632
Año del modelo
LlamadaCríticoSuspensiónJP

クリップ ボトル/ナッ

ホイールボルトの加工が不適切なため締結力が不足し、ボルトが緩むことがある。そのため、そのまま使用を続けると、ボルトが外れ、最悪の場合、ホイールが脱落するおそれがある。

MLIT · Japón12 abr 20071213960Años modelo 2005–2006Mostrado en japonés original · traducción pendienteVer detalles →
LlamadaCríticoSuspensiónNA

Ruedas: tuercas/pernos/espárragos

On certain vehicles, the road wheel fixing bolts may be dimensionally incorrect. There is a potential for these bolts to loosen.

NHTSA · Estados Unidos1 mar 200707V071000Años modelo 2005–2006Traducido automáticamente · original: inglésVer detalles →
LlamadaCríticoSuspensiónUK

Es posible que una rueda se desprenda del vehículo

Se ha determinado que los vehículos afectados llevan instalados pernos de retención de las ruedas que no cumplen con la especificación dimensional. Esto puede provocar que los pernos de las ruedas se aflojen, con la posibilidad de que una rueda llegue a desprenderse.

DVSA · Reino Unido16 feb 2007R/2007/034Años modelo 2005–2006Traducido automáticamente · original: inglésVer detalles →
LlamadaCríticoSuspensiónJP

ホイール

ペイント仕様のホイールにおいて、ボルト穴のテーパ部に誤って塗装してしまったため、当該ボルトが緩むものがある。そのため、そのまま使用を続けると、ボルトが外れ、最悪の場合、ホイールが脱落するおそれがある。

MLIT · Japón30 mar 20061212940Años modelo 2004–2005Mostrado en japonés original · traducción pendienteVer detalles →
LlamadaCríticoSuspensiónNA

Wheels

On certain vehicles, the wheels may have an incorrect finish, which can allow the bolts to loosen.

NHTSA · Estados Unidos10 feb 200606V040000Años modelo 2005Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaCríticoSuspensiónUK

Wheel fixing bolts may loosen

Due to the possibility of the road wheels having an incorrect finish the potential exists for the wheel fixing bolts to loosen. This defect could lead to the road wheel becoming detached from the hub.

DVSA · Reino Unido1 feb 2006R/2006/024Años modelo 2004–2005Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaCríticoMotorJP

燃料ホース/パイプ

燃料ポンプの異音対策として改良型の燃料ホースを取り付けられた車両において、燃料ホースの成形加工が不適切なため、使用中に当該燃料ホースの曲げ部および接続部に亀裂が入るものがある。そのため、そのまま使用を続けると、最悪の場合、燃料が漏れるおそれがある。

MLIT · Japón10 mar 20051212090Años modelo 1999–2002Mostrado en japonés original · traducción pendienteVer detalles →
LlamadaCríticoMotorJP

燃料ホース/パイプ

燃料ホースとパイプを接続するコネクターの構造が不適切なため、リリースリングが整備 中に不用意に押され当該コネクターが外れることがある、また、整備時等に再接続した際 、燃料ホースとパイプが正しく接続されにくく、確実に接続がされないことがある。その ため、そのまま走行を続けると燃料が漏れて、最悪の場合、火災に至るおそれがある。

MLIT · Japón27 may 20041211220Años modelo 2002–2003Mostrado en japonés original · traducción pendienteVer detalles →
LlamadaCríticoMotorNA

Fuel system, gasoline:Fuel injection system

On certain passenger vehicles and limousines, the fuel feed line quick connector may disengage, allowing fuel leakage.

NHTSA · Estados Unidos16 mar 200404V130000Años modelo 2002–2004Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaCríticoMotorNA

Fuel System

On certain vehicles, the potential exists, following disconnection, for the quick connector not to be fully re-engaged. This would eventually result in a loss of fuel that, in the presence of an ignition sources, creates a risk of a vehicle fire. Disconnection is a requirement for some service operations. Correction: Dealer will remove the quick release collar, ensure full engagement and fit a safety clip.

Transport Canada12 mar 20042004093Años modelo 2002–2004Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaCríticoFrenosJP

圧力制御伝達部

ブレーキ配管及び燃料配管の取り回しが不適切なものがあるため、ブレーキ配管が燃料配 管またはABS予圧ポンプと干渉し、走行時の振動等によりブレーキ配管または燃料配管 が摩耗するものがある。そのため、接触部が損傷して作動油または燃料が漏れ、制動力が 低下するまたは火災に至るおそれがある。

MLIT · Japón20 nov 20031210580Años modelo 2003Mostrado en japonés original · traducción pendienteVer detalles →
LlamadaCríticoMotorNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

On certain passenger and limousine vehicles, contact can occur between a brake pipe or fuel pipe and the antilock braking system (abs) modulator pump. Should this happen, it could result in eventual abrasive damage to either pipe, leading to possible leakage.

NHTSA · Estados Unidos6 oct 200303V367000Años modelo 2002–2004Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaCríticoFrenosJP

圧力制御伝達部

制動装置において、油圧式制動倍力装置の油圧制御装置と畜圧器とを接続するパイプの先 端の形状が不適切なものがあるため、そのままの状態で使用を続けると、当該接続部より 作動油が漏れ、制動力が低下するおそれがある。

MLIT · Japón20 may 20031210210Años modelo 2002Mostrado en japonés original · traducción pendienteVer detalles →
LlamadaCríticoFrenosJP

主ブレーキ一般

制動装置において、リザーバータンクからマスターシリンダへの前輪用ブレーキ液供給パ イプの形状が不適切なため、マスターシリンダ内に混入した微量の空気がリザーバータン クから放出されずに当該パイプ内に溜まり、ブレーキ操作時にマスターシリンダ内に再び 流入することがあり、ブレーキペダルの踏み代が増し、最悪の場合、制動力が低下するお それがある。

MLIT · Japón29 ago 20021209690Años modelo 1997–2002Mostrado en japonés original · traducción pendienteVer detalles →
LlamadaCríticoMotorNA

Fuel System

On certain vehicles, improperly manufactured fuel feed and return hoses were installed. The position of the crimp securing the rubber hose material to the steel quick release connection may have been improper. If the crimp is not properly position, fuel leakage could occur in the engine compartment. If an ignition source is present, this fuel leakage could result in a fire. Correction: Dealers will replace all feed and return hoses.

Transport Canada30 mar 20012001074Años modelo 2000–2001Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaCríticoMotorJP

燃料ホース/パイプ

原動機室内のゴム製燃料ホース(供給側及び戻り側)の金属製継手部へのかしめ方法が不 適切なため、そのままの状態で使用を続けると、かしめ部より燃料が漏れ、最悪の場合、 排気官に滴下して火災に至るおそれがある。

MLIT · Japón21 mar 20011208600Años modelo 2000–2001Mostrado en japonés original · traducción pendienteVer detalles →
LlamadaCríticoMotorNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

Vehicle description: Passenger vehicles. Improperly manufactured fuel feed and return hoses were installed in some of these vehicles. The position of the crimp securing the rubber hose material to the steel quick release connection may have been improper. If the crimp is not properly position, fuel leakage could occur in the engine compartment.

NHTSA · Estados Unidos14 feb 200101V042000Años modelo 2000–2001Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaCríticoMotorNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

Vehicle description: Passenger vehicles. The fuel return pipe in the engine compartment can wear through as the result of repeated contact with the exhaust manifold as the vehicle is driven. If the hose becomes damaged, fuel leakage could occur.

NHTSA · Estados Unidos24 mar 200000V092000Años modelo 2000Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaModeradoCarroceríaJP

車体

格納式ボンネットオーナメントの格納機構に使用されている部品の材質が不適切であり、腐食して動かなくなる場合がある。このため、ボンネットオーナメントが衝撃を受けたときに格納しないおそれがある。

MLIT · Japón22 oct 20101217080Años modelo 2006–2009Mostrado en japonés original · traducción pendienteVer detalles →
LlamadaModeradoCarroceríaUK

Posibilidad de lesiones a peatones

Es posible que, debido a la acumulación de corrosión, la mascota Flying B no se retraiga correctamente al recibir un impacto. Si el vehículo se ve involucrado en una colisión con un peatón y la mascota no se retrae correctamente, el peatón podría sufrir lesiones adicionales.

DVSA · Reino Unido23 sept 2010R/2010/143Años modelo 2006–2009Traducido automáticamente · original: inglésVer detalles →
LlamadaModeradoCarroceríaNA

Estructura:Carrocería:Capó

Bentley está retirando del mercado ciertos vehículos de los modelos 2007-2009 arnager, arnaget, arnage rl, brooklands y azure. Existe la posibilidad de que el mecanismo de retracción del adorno "b" del capó se corroa. Esto puede provocar que el adorno "b" del capó no se retraiga como está previsto cuando el vehículo se ve involucrado en un choque.

NHTSA · Estados Unidos13 sept 201010V411000Años modelo 2007–2009Traducido automáticamente · original: inglésVer detalles →
LlamadaModeradoSuspensiónJP

緩衝アーム/ロッド

フロントロアアームにおいて、ボールジョイント部のセルフロックナットの加工が不適切なため、走行中の振動等により当該ナットが緩むことがある。そのため、そのまま使用を続けると、ナットが脱落し、最悪の場合、ロアアームが外れ、走行不能になるおそれがある。

MLIT · Japón8 dic 20051212720Años modelo 2004–2005Mostrado en japonés original · traducción pendienteVer detalles →
LlamadaModeradoSuspensiónNA

Suspension:Front:Control arm:Lower ball joint

On certain passenger vehicles, due to the use of a non self-locking nut, the front suspension lower ball joint can become disconnected.

NHTSA · Estados Unidos29 nov 200505V546000Años modelo 2005Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaModeradoSuspensiónNA

Suspension

On certain vehicles, due to the fitment of a nut without the specified self-locking feature, the front lower ball joint may become disconnected. This condition could lead to a loss of directional control and result in a crash. Correction: Dealers will replace the lower ball joint nuts.

Transport Canada23 nov 20052005368Años modelo 2005Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaModeradoSuspensiónUK

Potential loss of directional control

Due to the fitment of a nut without the specified self-locking feature the potential exists for the front suspension lower ball joint to become disconnected. This may lead to loss of directional control.

DVSA · Reino Unido17 nov 2005R/2005/169Mostrado en inglés original · traducción pendienteVer detalles →
Anteriores →

Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).