Lectura libre · cuenta gratuita para colaborarSucesor de Anticars (2000)

DodgeDodge Dart

2012–2016 · 1 generaciones · 9 averías documentadas · 3 mercados
Generaciones
Todas las generacionesDart2012–2016912281

Los boletines técnicos (TSB) son instrucciones de reparación que los fabricantes envían a sus concesionarios sobre problemas conocidos. No son llamadas a revisión de seguridad, pero a menudo confirman una avería.

Año del modelo
MercadoTodosNA
BoletínModeradoMotorNA

Boletín

Una queja de cliente puede incluir fuga o consumo de aceite del motor

NHTSA · boletín del fabricante10221277Años modelo 2016Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoMotorNA

Boletín

Customer Complaint May Include Engine Oil Leak Or Consumption

NHTSA · boletín del fabricante10212473Años modelo 2016Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoFrenosNA

Boletín

Tubo - freno

NHTSA · boletín del fabricante10170347Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoCarroceríaNA

Boletín

Flash: 2.0L Diagnostic And System Improvements software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): **P0335-00 - Crankshaft Position Sensor Circuit.** P030X - Cylinder X Misfire improvements when P0335 (Crankshaft Position Sensor Circuit) is present. P0116 - Engine Coolant Temperature Sensor 1 Performance. P0456 - EVAP System Small Leak. P0441 - EVAP Purge System Performance. P1D73 - AGS (Active Grill Shutter) Performance. U0140 - Lost Communication With Body Control Module (BCM). In addition to the above conditions, a customer may also experience the following symptoms: ASD/Fuel pump relay cycling during remote start. E15 cold start improvements in temperatures below -7C (20F).

NHTSA · boletín del fabricante10228107Años modelo 2015Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Flash: 2.4L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: **P1185 - General Pressure Sensor Correlation.** P0335 - Crankshaft Position Sensor Circuit. P050D - Cold Start Rough Idle. P0456 - Evap System Small Leak. P0133 - O2 Sensor 1/1 Slow Response (additional enhancements). P2610 - PCM Internal Engine Off Timer Performance. P1607 - PCM Internal Shutdown Timer Rationality. **In addition to the above DTCs, this software release also includes these enhancements/corrections: A ?Clunk feeling" when depressing the gas pedal after a coasting maneuver when Decel Fuel Shut Off (DFSO) is enabled and is exiting during pedal tip-in.** False reading that the engine is overheating based on the engine oil temp gauge read out. Improved ambient temperature sensor diagnostics during sunload. Disable misfire monitor when P0335 (Crankshaft Position Sensor Circuit) is present. Engine oil temperature gauge level recalibration to avoid the misperception of an engine overheating condition.

NHTSA · boletín del fabricante10228108Años modelo 2016Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Flash: 2.0L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): **P0335-00 - Crankshaft Position Sensor Circuit.** P0456 - EVAP System Small Leak. P2610 - PCM Internal Engine Off Timer Performance. P1607 - PCM Internal Shutdown Timer Rationality. In addition to the above DTCs, this software release also includes: Enhancements to the disable misfire monitor when P0335 (Crankshaft Position Sensor Circuit) is present. Re-Activation of Electronic Throttle Control (ETC) (2.0L MTX only). Engine oil temperature gauge calibration enhancement.

NHTSA · boletín del fabricante10228116Años modelo 2016Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoMotorNA

Boletín

Notificación de satisfacción del cliente T12 Etiqueta VECI La etiqueta de información de control de emisiones del vehículo (VECI, por sus siglas en inglés) de aproximadamente 120,000 de los vehículos mencionados anteriormente podría no contener la información de control de emisiones. La etiqueta VECI se utiliza con frecuencia durante las pruebas de inspección y mantenimiento (I/M) en uso para verificar el correcto funcionamiento de los componentes relacionados con las emisiones. La información incorrecta en la etiqueta VECI podría resultar en la denegación del registro del vehículo en el estado de California. Se debe instalar una nueva etiqueta VECI.

NHTSA · boletín del fabricante10224875Años modelo 2015Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoOtroNA

Boletín

Rear Shelf Panel Replacement This bulletin involves replacing the rear shelf panel. The customer may describe poor rear speaker performance due to an incorrect rear shelf panel installed in the vehicle.

NHTSA · boletín del fabricante10223820Años modelo 2016Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoMotorNA

Boletín

## Reemplazar la etiqueta de información de certificación de emisiones del vehículo Este boletín trata sobre el reemplazo de la etiqueta de información de certificación de emisiones del vehículo (VECI). El propietario puede ser rechazado en una estación de inspección y mantenimiento (IM) o reprobar la prueba IM debido a componentes de emisiones faltantes en la etiqueta VECI. Es posible que el cliente note que falta cierta información en sus etiquetas VECI. Si aparece información en esta área, no reemplace la etiqueta. Todos los vehículos se fabricaron con los componentes de emisiones correctos instalados y no hay impacto en el rendimiento de emisiones ni en la conducibilidad.

NHTSA · boletín del fabricante10223853Años modelo 2015Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoMotorNA

Boletín

Some of the above vehicles may experience an engine stall when the engine is first started while the outside ambient air temperature is 20 degrees or lower and the vehicle is operated under certain driving conditions.

NHTSA · boletín del fabricante10220406Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoFrenosNA

Boletín

Front Brake Noise (Squeal) This bulletin involves changing front brake pads to correct a brake squeal noise. The customer may experience a squealing noise during braking coming from the front of the vehicle.

NHTSA · boletín del fabricante10218808Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoFrenosNA

Boletín

Front Brake Noise (Squeal) This bulletin involves changing front brake pads to correct a brake squeal noise. The customer may experience a squealing noise during braking coming from the front of the vehicle.

NHTSA · boletín del fabricante10217967Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Flash: 2.0L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The customer may describe a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find one or more of the following DTCs set in the PCM memory: **P0335 - Crankshaft Position Sensor Circuit. P2610 - PCM Internal Engine Off Timer Performance.** U0140 - Lost Communication With Body Control Module. P1D73 - AGS Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. P0456 - Evap System Small Leak. In addition to addressing the above DTCs, the following powertrain system improvements/enhancements are also included in this software release: Electronic Vehicle Information Center (EVIC) Fuel Economy display accuracy. Improved Enhanced Automatic Oil Change Indicator (EAOCI) system accuracy. Corrected a generic scan tool display issue regarding Mode 6 data accuracy.

NHTSA · boletín del fabricante10217615Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Flash: Various Driveability Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Some customers may experience the Electronic Vehicle Information Center (EVIC) Fuel Economy display is inaccurate or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find one of more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? U0140 - Lost Communication With Body Control Module. ? P1D73 - AGS Performance. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P0456 - Evap System Small Leak. In addition to addressing the above DTCs, the following powertrain system improvements/enhancements are also included in this software release. ? Improved Enhanced Automatic Oil Change Indicator (EAOCI) system accuracy. ? Corrected a generic scan tool display issue regarding Mode 6 data accuracy.

NHTSA · boletín del fabricante10217432Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Flash: 2.4L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0133 - O2 Sensor 1/1 Slow Response. In addition, some customers may describe that the engine is overheating based on the engine oil temp gauge read out. Software improvements include an engine oil temperature gauge level recalibration to avoid the misperception of an engine overheating condition.

NHTSA · boletín del fabricante10217436Años modelo 2016Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Flash: Driveability Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: ? P1128 - Closed Loop Fueling Not Achieved - Bank 1 Upstream ? P1D73 - 00 - AGS Performance ? P1CEA - Boost Side Evap Purge System Performance ? P0456 - Evap System Small Leak Customers may also experience any of the following symptoms: ? Customer experiences cold start issues below 14F ( -10C) ambient temperatures; engine turns over faster (loss of compression) during crank and possibly does not start until a key cycle is performed. ? Engine cranks as if it has no compression. ? Engine sounds like it is knocking at idle, noise goes away when off idle. ? Spark knock when using low octane fuel in the vehicle. ? Black smoke from tail pipe on initial start up during cold ambient temperatures. ? Uneven acceleration feeling under moderate to heavy throttle input. ? Bump or surge noticed prior to engine reaching normal operating temperature. ? Rough idle during A/C engagement/disengagement. ? During periods of extended idle or short hot soak events and ambient temperatures below 15F (-9C), engine idle speed may increase to 1800 RPM if coolant temperature drops below 158F (70C). Condition is only present when the transmission is in park. ? Low speed engine response improvements in city and traffic driving conditions. Updating the PCM software will correct the condition listed above.

NHTSA · boletín del fabricante10217430Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Flash: No Start or Start and Stall When Using Remote Start This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience any of the following conditions: ? Engine starts then immediately stalls when using Remote Start system (Instrument Cluster may display the message ?Remote Start Disabled, Start Vehicle to Reset?) ? Engine cranks and does not start following the condition described above ? Engine may be hard to re-start at ambient temps below 10F(-12C) Updating the software will correct the conditions listed above.

NHTSA · boletín del fabricante10216450Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoFrenosNA

Boletín

Rattle From Front Brakes When Driving, Without Brakes Applied This bulletin involves replacing the front brake caliper brackets, spring clips and if necessary front brake pads. Rattle from front brakes when driving, without brakes applied

NHTSA · boletín del fabricante10216440Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Flash: Driveability Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: ? P1128 - Closed Loop Fueling Not Achieved - Bank 1 Upstream ? P1D73 - 00 - AGS Performance ? P1CEA - Boost Side Evap Purge System Performance ? P0456 - Evap System Small Leak Customers may also experience any of the following symptoms: ? Customer experiences cold start issues below 14F ( -10C) ambient temperatures; engine turns over faster (loss of compression) during crank and possibly does not start until a key cycle is performed. ? Engine cranks as if it has no compression. ? Engine sounds like it is knocking at idle, noise goes away when off idle. ? Spark knock when using low octane fuel in the vehicle. ? Black smoke from tail pipe on initial start up during cold ambient temperatures. ? Uneven acceleration feeling under moderate to heavy throttle input. ? Bump or surge noticed prior to engine reaching normal operating temperature. ? Rough idle during A/C engagement/disengagement. ? During periods of extended idle or short hot soak events and ambient temperatures below 15F (-9C), engine idle speed may increase to 1800 RPM if coolant temperature drops below 158F (70C). Condition is only present when the transmission is in park. ? Low speed engine response improvements in city and traffic driving conditions. Updating the PCM software will correct the condition listed above.

NHTSA · boletín del fabricante10216192Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Flash: Various Driveability Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Some customers may experience the Electronic Vehicle Information Center (EVIC) Fuel Economy display is inaccurate or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find one of more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? U0140 - Lost Communication With Body Control Module. ? P1D73 - AGS Performance. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P0456 - Evap System Small Leak. In addition to addressing the above DTCs, the following powertrain system improvements/enhancements are also included in this software release. ? Improved Enhanced Automatic Oil Change Indicator (EAOCI) system accuracy. ? Corrected a generic scan tool display issue regarding Mode 6 data accuracy.

NHTSA · boletín del fabricante10216194Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Flash: 2.4L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? P0133 - O2 Sensor 1/1 Slow Response. In addition, some customers may describe that the engine is overheating based on the engine oil temp gauge read out. Software improvements include an engine oil temperature gauge level recalibration to avoid the misperception of an engine overheating condition.

NHTSA · boletín del fabricante10216198Años modelo 2016Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Flash: No Start or Start and Stall When Using Remote Start This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software and updating the Body Control Module (BCM) software. A small number of customers may experience any of the following conditions: Engine starts then immediately stalls when using Remote Start system (Instrument Cluster may display the message ?Remote Start Disabled, Start Vehicle to Reset?) Engine cranks and does not start following the condition described above Engine may be hard to re-start at ambient temps below 10F(-12C)Updating the software will correct the conditions listed above.

NHTSA · boletín del fabricante10215979Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCarroceríaNA

Boletín

Rattle And/Or Buzz At The Right Rear Of Vehicle And/Or Fuel Door Difficult To Open This bulletin involves inspecting and if necessary modifying the fuel filler housing. It may also involve inspecting the fuel filler door and if necessary reinstalling or replacing the fuel filler housing. Rattle and/or buzz at the right rear of vehicle and/or fuel door difficult to open.

NHTSA · boletín del fabricante10215989Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoOtroNA

Boletín

Remote Start Option Missing This Bulletin involves installing a Mopar remote start kit. The customer and or dealer may note that the remote start option is missing from the vehicle. The Monroney label will shows the vehicle having this feature.

NHTSA · boletín del fabricante10215992Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCarroceríaNA

Boletín

This bulletin involves inspecting and if necessary modifying the fuel filler housing. It may also involve inspecting the fuel filler door and if necessary reinstalling or replacing the fuel filler housing. Rattle and/or buzz at the right rear of vehicle and/or fuel door will not open.

NHTSA · boletín del fabricante10215819Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
Anteriores →

Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).