Lectura libre · cuenta gratuita para colaborarSucesor de Anticars (2000)

Ford Escape

2000–2025 · 4 generaciones · 53 averías documentadas · 6 mercados
Generaciones

Los boletines técnicos (TSB) son instrucciones de reparación que los fabricantes envían a sus concesionarios sobre problemas conocidos. No son llamadas a revisión de seguridad, pero a menudo confirman una avería.

Año del modelo
Escape III · 2012–2019
BoletínModeradoMotorNA

Boletín

Arranque difícil, no arranca o pérdida de revoluciones del motor tras repostar - fabricado en o antes del 11/09/2013

NHTSA · boletín del fabricante10205040Años modelo 2013Traducido automáticamente · original: inglésVer detalles →
Escape III · 2012–2019
BoletínModeradoMotorNA

Boletín

2017 vehículos equipados con un motor 2.0L GTDI, 2.3L GTDI o 2.5L PFI vendrán equipados ya sea con una arandela de diamante a cada lado de un piñón de distribución del cigüeñal de cara lisa (construcción temprana), o con un piñón de distribución del cigüeñal con caras grabadas por láser y sin arandelas de diamante (construcción tardía). Si están equipadas, las arandelas de diamante deben limpiarse, inspeccionarse y reutilizarse, siempre que no estén dañadas. Las arandelas de diamante nunca deben instalarse junto con un piñón de distribución del cigüeñal grabado por láser. La información del procedimiento WSM relacionado se encuentra en proceso de actualización.

NHTSA · boletín del fabricante10119671Años modelo 2017Traducido automáticamente · original: inglésVer detalles →
Escape II · 2007–2012
BoletínModeradoMotorNA

Boletín

3.0l duratec engine--oil leak (low ambient temperature)--dipstick or crankshaft seal. *nj

NHTSA · boletín del fabricante10024321Años modelo 2008Mostrado en inglés original · traducción pendienteVer detalles →
Escape I · 2000–2006
BoletínModeradoMotorNA

Boletín

Possible engine damage - install special service tools prior to removing crankshaft pulley bolt - service tip. *tt

NHTSA · boletín del fabricante10020173Años modelo 2005Mostrado en inglés original · traducción pendienteVer detalles →
Escape I · 2000–2006
BoletínModeradoMotorNA

Boletín

Engine overheating and/or loss of air conditioning (a/c) performance. *tt

NHTSA · boletín del fabricante10014085Años modelo 2005Mostrado en inglés original · traducción pendienteVer detalles →
Escape I · 2000–2006
BoletínModeradoMotorNA

Boletín

Water pump pulley cover no longer installed. *tt

NHTSA · boletín del fabricante10009336Años modelo 2005Mostrado en inglés original · traducción pendienteVer detalles →
Escape I · 2000–2006
BoletínModeradoMotorNA

Boletín

Oil leak from dipstick or front or rear crankshaft seals - heated pcv service kit - 3.0l duratec engine. *tt

NHTSA · boletín del fabricante10008537Años modelo 2005Mostrado en inglés original · traducción pendienteVer detalles →
Escape I · 2000–2006
BoletínModeradoMotorNA

Boletín

Some vehicles may exhibit vacuum or air leaks in the intake manifold and / or engine system causing diagnostic trouble codes p0171 and or p0174. *tt

NHTSA · boletín del fabricante627927Años modelo 2001Mostrado en inglés original · traducción pendienteVer detalles →
Escape IV · 2019–2025
BoletínLeveMotorNA

Boletín

2024 Escape and Bronco Sport vehicles equipped with 1.5L engines should add local fuel once the vehicle arrives at the dealership to reduce the risk of various engine performance concerns such as: rough operation, idle quality, engine misfires, lack or loss of engine power. These conditions may occur due to different fuel specifications between the manufacturing plant and the final market. Make sure that the vehicles in stock have local fuel added.

NHTSA · boletín del fabricante10252631Años modelo 2024Mostrado en inglés original · traducción pendienteVer detalles →
Escape IV · 2019–2025
BoletínLeveMotorNA

Boletín

Certain 2023 Model Year Escape and Corsair Vehicles Equipped with a 2.0L Engine - Seal Replacement for Turbocharger Coolant Return Tube to Cylinder Head

NHTSA · boletín del fabricante10246068Años modelo 2023Mostrado en inglés original · traducción pendienteVer detalles →
Escape IV · 2019–2025
BoletínLeveMotorNA

Boletín

Some 2021 Escape/Escape Hybrid vehicles built on 10-Aug-2021 and through 20-Sep-2021 may exhibit a front-end flutter/rattle noise at 65 mph (105 km/h) or higher. Engineering is aware of this concern. Due to parts availability, a repair procedure may not be available until 1st quarter, 2022. Using the Ford Diagnosis and Repair System (FDRS), command the active grill shudders open and closed to see if the flutter/rattle noise changes. If the flutter/rattle noise does not change, continue with normal Workshop Manual (WSM), Section 100-04 for diagnostic and repair information. If the flutter/rattle noise does change, advise the customer that the vehicle is safe to drive and that replacement parts will be available soon. Schedule a follow-up appointment for 1st quarter, 2022 and when the repair procedure and parts become available, contact the customer to arrange repairs. Monitor OASIS for updates.

NHTSA · boletín del fabricante10203843Años modelo 2021Mostrado en inglés original · traducción pendienteVer detalles →
Escape IV · 2019–2025
BoletínLeveMotorNA

Boletín

Some 2021 Escape/Escape Hybrid vehicles built on 10-Aug-2021 through 20-Sep-21 may exhibit a front-end flutter/rattle noise at 65 mph (105 km/h) or higher. Engineering is aware of this concern and a repair procedure should be available late October. Using the Ford Diagnosis and Repair System (FDRS), command the active grill shudders open and closed to see if the flutter/rattle noise changes. If the flutter/rattle noise does not change, continue with normal Workshop Manual, Section 100-04 for diagnostic and repair information. If the flutter/rattle noise does change, advise the customer that the vehicle is safe to drive in the meantime. Schedule a follow-up appointment for late October and when the repair procedure becomes available, contact the customer to arrange repairs. Monitor OASIS for updates.

NHTSA · boletín del fabricante10202610Años modelo 2021Mostrado en inglés original · traducción pendienteVer detalles →
Escape IV · 2019–2025
BoletínLeveMotorNA

Boletín

Some 2021 Escape Hybrid vehicles built on 10-Aug-2021 through 20-Sep-21 may exhibit a front-end flutter/rattle noise at 65 mph (105 km/h) or higher. Engineering is aware of this concern and a repair procedure should be available late October. Using the Ford Diagnosis and Repair System (FDRS), command the active grill shudders open and closed to see if the flutter/rattle noise changes. If the flutter/rattle noise does not change, continue with normal Workshop Manual, Section 100-04 for diagnostic and repair information. If the flutter/rattle noise does change, advise the customer that the vehicle is safe to drive in the meantime. Schedule a follow-up appointment for late October and when the repair procedure becomes available, contact the customer to arrange repairs. Monitor OASIS for updates.

NHTSA · boletín del fabricante10201701Años modelo 2021Mostrado en inglés original · traducción pendienteVer detalles →
Escape IV · 2019–2025
BoletínLeveMotorNA

Boletín

Some 2020-2021 Escape/2021 Bronco Sport vehicles equipped with a 1.5L engine may exhibit a low oil pressure warning with diagnostic trouble code (DTC) P0524. The Workshop Manual (WSM) Sections 303-14, 303-00, and 413-01 have been updated with new information to aid in diagnosis of the low oil pressure warning and DTC P0524.

NHTSA · boletín del fabricante10191097Años modelo 2021Mostrado en inglés original · traducción pendienteVer detalles →
Escape IV · 2019–2025
BoletínLeveMotorNA

Boletín

Some 2020 Escape vehicles equipped with a 1.5L EcoBoost engine and built on or before 30-Nov-2019 may exhibit a vibration at idle. This may be due to the engine mounts. To correct the condition, follow the Service Procedure steps to replace the engine mounts and perform the engine mount neutralization procedure.

NHTSA · boletín del fabricante10180533Años modelo 2020Mostrado en inglés original · traducción pendienteVer detalles →
Escape IV · 2019–2025
BoletínLeveMotorNA

Boletín

Algunos vehículos Ford y Lincoln de 2020 equipados con una TCU pueden presentar autorización de usuario incompleta, ausencia de ventana emergente de autorización en el sistema de infoentretenimiento SYNC, problemas de conectividad del vehículo, mensaje de ubicación del vehículo desactivada y/o diversos problemas de comando/control de la aplicación FordPass/LincolnWay. Para corregir estas condiciones, asegúrese de que los ajustes de conectividad del cliente (CCS) estén activados en el sistema SYNC. Si los problemas persisten después de activar CCS, desactive CCS, realice un ciclo de encendido y vuelva a activar los ajustes de CCS. Después de cualquier cambio en CCS, cierre forzosamente y vuelva a abrir la aplicación FordPass/LincolnWay en el teléfono del cliente. Una vez activado CCS, programe la TCU a la versión más reciente de IDS/FDRS. Si el problema sigue presente, siga el diagnóstico normal del Manual de Taller (WSM), Sección 415-00. Consulte la página principal de PTS OASIS para la identificación de la versión de la TCU. Para la reclamación, utilice la pieza causal 14G229.

NHTSA · boletín del fabricante10179344Años modelo 2020Traducido automáticamente · original: inglésVer detalles →
Escape IV · 2019–2025
BoletínLeveMotorNA

Boletín

Some 2019 Escape/Fusion vehicles equipped with a Sony branded audio system may exhibit AM presets that may not save and/or may be lost after an ignition cycle. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.

NHTSA · boletín del fabricante10153978Años modelo 2019Mostrado en inglés original · traducción pendienteVer detalles →
Escape III · 2012–2019
BoletínLeveMotorNA

Boletín

Ciertos vehículos de múltiples líneas del año modelo 2017 - Cobertura de piezas de la garantía de emisiones de California

NHTSA · boletín del fabricante10143113Años modelo 2017Traducido automáticamente · original: inglésVer detalles →
Escape III · 2012–2019
BoletínLeveMotorNA

Boletín

Some 2017 Escape vehicles equipped with a 1.5L Gasoline Turbocharged Direct Injection (GTDI) engine and built on or before 1-Feb-2017 may exhibit an illuminated MIL with DTC P051B. Follow the Service Procedure steps to correct the condition.

NHTSA · boletín del fabricante10127402Años modelo 2017Mostrado en inglés original · traducción pendienteVer detalles →
Escape III · 2012–2019
BoletínLeveMotorNA

Boletín

Some 2014-2017 Fusion and 2017 Escape vehicles equipped with a 1.5L Gasoline Turbocharged Direct Injection (GTDI) engine may exhibit low coolant, white exhaust smoke and an illuminated MIL if diagnostic trouble codes (DTCs) P0217, P300, P0301, P0302, P0303, P0304, P0316 and/or P1299 are present. This condition may be due to an intake manifold bolt backing out causing damage to the charge air cooler (CAC). Follow the Service Procedure steps to correct the condition.

NHTSA · boletín del fabricante10109048Años modelo 2017Mostrado en inglés original · traducción pendienteVer detalles →
Escape III · 2012–2019
BoletínLeveMotorNA

Boletín

Some 2012-13 Focus and 2013 Escape/C-MAX vehicles may have the wrong part in the box for the BCM (base 14A068). The suspect service part number is GV6Z-14A068-G. The wrong part will have an engineering number of GV6T-14A073-GD and it will not work. The correct part will have engineering part number of GV6T-14A073-with a suffix of XA, XB, XC, or XF. Dealers should utilize the normal return process of a miss packaged part. Continue to monitor OASIS. When this concern is resolved, an update will be provided.

NHTSA · boletín del fabricante10109025Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
Escape III · 2012–2019
BoletínLeveMotorNA

Boletín

Some 2017 escape vehicles with electronic manual temperature control (emtc) and ford original accessory or fia scalable remote start systems may exhibit a concern of the air distribution and temperature controls becoming locked after 5 minutes when the vehicle is started with the remote start system. After approximately 5 minutes of driving the air distribution and temperature controls lock and requests for air distribution and temperature changes will not occur. The heating ventilation and air conditioning (hvac) controls correctly indicate when changes are selected but the requested air distribution and temperature control functions will not occur. Normal operation is restored when the key is cycled. This concern does not affect blower motor operation. Engineering is investigating this concern. Monitor oasis for updates.

NHTSA · boletín del fabricante10100084Años modelo 2017Mostrado en inglés original · traducción pendienteVer detalles →
Escape III · 2012–2019
BoletínLeveMotorNA

Boletín

Some 2014-2017 fusion and 2017 escape vehicles equipped with a 1.5l gasoline turbocharged direct injection (gtdi) engine and an odometer reading 16,000 km (10,000 miles) or above may exhibit low coolant, white exhaust smoke and may also exhibit an illuminated mil with diagnostic trouble codes (dtcs) p0217, p0300, p0301, p0302, p0303, p0304, p0316 and/or p1299. This condition may be due to an intake manifold bolt backing out causing damage to the charge air cooler (cac). Follow the service procedure steps to correct the condition

NHTSA · boletín del fabricante10099073Años modelo 2017Mostrado en inglés original · traducción pendienteVer detalles →
Escape III · 2012–2019
BoletínLeveMotorNA

Boletín

Some 2014-2017 fusion and 2017 escape vehicles equipped with a 1.5l gasoline turbocharged direct injection (gtdi) engine may exhibit low coolant, white exhaust smoke and an illuminated mil if diagnostic trouble codes (dtcs) p0217, p300, p0301, p0302, p0303, p0304, p0316 and/or p1299 are present. This condition may be due to an intake manifold bolt backing out causing damage to the charge air cooler (cac). Follow the service procedure steps to correct the condition

NHTSA · boletín del fabricante10095958Años modelo 2017Mostrado en inglés original · traducción pendienteVer detalles →
Escape III · 2012–2019
BoletínLeveMotorNA

Boletín

Some 2017 escape vehicles equipped with a 1.5l gtdi engine may exhibit a timing belt saw or chirp type noise at idle while the vehicle is in transport mode. The noise is noticeable because of an elevated idle speed while the vehicle is in transport mode. Do not remove the vehicle from transport mode to diagnose or perform a repair for this noise. Vehicle should only be removed from transport mode as directed by the pre-delivery procedure.

NHTSA · boletín del fabricante10091431Años modelo 2017Mostrado en inglés original · traducción pendienteVer detalles →
Anteriores →

Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).