Este expediente reúne las averías conocidas del Mazda CX-90, redactadas y documentadas por la comunidad. La lectura es libre; una cuenta gratuita permite colaborar. Una avería recibe el sello cuando suficientes colaboradores reconocidos la han validado.
232 propietarios en Estados Unidos informaron de problemas con la dirección de este coche a la NHTSA (años modelo 2024–2026), normalmente en torno a las 36.000 millas. Consecuencias reportadas: 7 accidentes, 5 heridos.
✓ Análisis de Mecafile de datos oficiales2024–2026Traducido automáticamente · original: inglésVer detalles →
101 propietarios en Estados Unidos informaron de problemas con el motor de este coche a la NHTSA (años modelo 2024–2026), normalmente en torno a las 29.000 millas. Consecuencias reportadas: 1 accidente, 1 lesión.
✓ Análisis de Mecafile de datos oficiales2024–2026Traducido automáticamente · original: inglésVer detalles →
97 propietarios en Estados Unidos informaron de problemas con el sistema eléctrico de este coche a la NHTSA (años modelo 2024–2026), normalmente en torno a las 28.000 millas. Consecuencias reportadas: 3 accidentes, 1 herido.
✓ Análisis de Mecafile de datos oficiales2024–2026Traducido automáticamente · original: inglésVer detalles →
Mazda North American Operations (Mazda) is recalling certain 2024-2025 CX-90 and 2025 CX-70 mild hybrid electric vehicles (MHEV). The fuel gauge in the instrument cluster may display an inaccurate fuel reading.
NHTSA · Estados Unidos2 sept 202525V568000Años modelo 2024–2025Mostrado en inglés original · traducción pendienteVer detalles →
Une augmentation soudaine de l’effort peut être ressentie lors de la direction du véhicule en raison d’une force de frottement excessive de l’engrenage vers incorporé dans l’ensemble de l’appareil à gouverner. un changement soudain et inattendu de l’effort de direction pendant la conduite peut augmenter le risque d’accident.
Safety Gate · UE · RappelConso · Francia3 jun 2025a12/00811/24Años modelo 2022–2023Mostrado en francés original · traducción pendienteVer detalles →
Mazda North American Operations (Mazda) is recalling certain 2024-2025 CX-90 and 2025 CX-70 vehicles equipped with a Dash Electrical Supply Unit (ESU). During vehicle startup, the defroster, seat belt warning, 360° view monitor functions, and the PHEV high-voltage battery cooling system may not function properly.
NHTSA · Estados Unidos31 oct 202424V814000Años modelo 2024–2025Mostrado en inglés original · traducción pendienteVer detalles →
This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-001/25 10/16/25, 05/15/25, 04/17/25 and 01/09/25 DESCRIPTION This Service Information is no longer valid and has been unpublished. Refer to: MSP66 - ENGINE WARNING ILLUMINATION WITH DTC P0DAB - 2024-2026 CX-90 AND 2025-2026 CX-70
NHTSA · boletín del fabricante11037016Años modelo 2024Mostrado en inglés original · traducción pendienteVer detalles →
DESCRIPTION For CX-70 PHEV (SC) models, the SC specification includes ECU modifications to extend electric driving range. The BECM (Battery Energy Control Module) inside the high-voltage battery pack must be maintained at C-level or later. REPAIR PROCEDURE When replacing the high-voltage (HV) battery pack, verify the BECM software level. If the level is earlier than C-level, update it to C-level or later and execute configuration after completing the update. 1. Reprogram the BECM with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS). Refer to MDARS ECU Reprogramming Procedure.
NHTSA · boletín del fabricante11037007Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
DESCRIPTION Some customers may experience ATF seepage from the High-Voltage (HV) motor terminal area. If ATF seepage is confirmed at this location, one or more of the following conditions may occur: ATF is leaking from the HV cable. ATF is leaking from the inverter connection. This is caused by through-hole porosity generated during manufacturing of the intermediate terminal block (busbar), allowing oil to seep from the component. To eliminate this concern, an Impregnation treatment (a sealing process in which resin, oil, or other liquids are infused into minute internal voids in the material, such as porosity, pinholes, or cracks) is applied to the aluminum plate portion of the busbar. REPAIR PROCEDURE 1. Verify the customer concern. 2. Replace the busbar with a new one.
NHTSA · boletín del fabricante11035601Años modelo 2024Mostrado en inglés original · traducción pendienteVer detalles →
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0).