Lectura libre · cuenta gratuita para colaborarSucesor de Anticars (2000)

Mazda CX-50

2022– · 1 generaciones · 7 averías documentadas · 1 mercados
Generaciones
Todas las generacionesCX-502022–77271

Los boletines técnicos (TSB) son instrucciones de reparación que los fabricantes envían a sus concesionarios sobre problemas conocidos. No son llamadas a revisión de seguridad, pero a menudo confirman una avería.

Año del modelo
MercadoTodosNA
BoletínModeradoElectrónicaNA

Boletín

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. SA-037/26 05/28/26 DESCRIPTION Replacement battery packs for High Voltage systems are supplied with an additional label that matches the one attached to the service battery pack (refer to the sample High Voltage Battery Label image for reference). When replacing the battery pack in a 2026 or later model that has a similar label at the base of the left B-pillar, replace the label with the new one included in the service parts battery pack. REPAIR PROCEDURE Label Application: When replacing a High Voltage Battery: refer to the Label Application Process included in the "HIGH VOLTAGE BATTERY REMOVAL/INSTALLATION" or "M Hybrid Boost BATTERY REMOVAL/INSTALLATION" procedures in the Workshop Manual for the applicable models.

NHTSA · boletín del fabricante11034440Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoOtroNA

Boletín

This service alert supersedes the previously issued service alert listed below. The changes are noted in Red text. SA-047/25 10/07/25 DESCRIPTION When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated. CAUTION: DO NOT swap TCU with another vehicle as the TCU is VIN locked after activation. A TCU swap with another vehicle will disable Connected Services on both vehicles. If TCU activation is not performed, connected vehicle functions will not operate. This will have a negative impact on the customer because they will need to return to the dealer for repairs. If the Telematics Control Unit (TCU) replacement is necessary, check "Vehicle Communication Line Status Reference" status detail first. The TCU can only be replaced under the following "Status Detail" conditions: Open Completed (OK) Closed Completed (OK) If the TCU is replaced under the following "Status Detail" conditions, the customer may not be able to enroll into the replacement TCU. Processing (NG) Request Failed (NG) Open Failed (NG) Flag Setting Failed TCU Activation 1. Install the new TCU.

NHTSA · boletín del fabricante11033447Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. SA-049/25 10/16/2025 DESCRIPTION Replacement battery packs for High Voltage systems are supplied with an additional label that matches the one attached to the service battery pack (refer to the sample High Voltage Battery Label image for reference). When replacing the battery pack in a 2026 or later model that has a similar label at the base of the left B-pillar, replace the label with the new one included in the service parts battery pack. REPAIR PROCEDURE Label Application: When replacing a High Voltage Battery: refer to the Label Application Process included in the "HIGH VOLTAGE BATTERY REMOVAL/INSTALLATION" or "M Hybrid Boost BATTERY REMOVAL/INSTALLATION" procedures in the Workshop Manual for the applicable models. In addition to the procedures outlined in the Workshop Manual, please follow these additional steps when removing an existing label to help simplify the application of the new one:

NHTSA · boletín del fabricante11033443Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

HYBRID SYSTEM FAILURE DISPLAYED ON METER WITH DTC P2530:12 This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 30-001/26 02/19/26 and 03/24/26 This technical service bulletin has been superseded to SSPE0. Concern Outline: When starting the vehicle, a Master Warning Light may turn on and a hybrid system failure message (Hybrid System Malfunction Have the Vehicle Inspected) may be displayed in the instrument cluster. The hybrid system may not activate, and the engine may not start, along with the DTC P2530:12 [Hybrid Control] and other numerous DTCs. Repair Outline: Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS) by following TSB 30-001/26 repair instructions.

NHTSA · boletín del fabricante11032007Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Subject: Notification of Special Service Program (SSPE0) - 2025 CX-50 Hybrid - Hybrid System Failure Displayed on Instrument Cluster (DTC P2530:12) Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Special Service Program on certain 2025 CX-50 Hybrid vehicles. Concern Outline: When starting the vehicle, a Master Warning Light may turn on and a hybrid system failure message (Hybrid System Malfunction Have the Vehicle Inspected) may be displayed in the instrument cluster. The hybrid system may not activate, and the engine may not start, along with the DTC P2530:12 [Hybrid Control] and other numerous DTCs. Repair Outline: Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS) by following TSB 30-001/26 repair instructions. ACTION ITEM - STOP DELIVERY: All dealer inventory types: New, Certified Pre-Owned, or Used can be sold but not delivered until repaired. There are approximately 50 new vehicles in dealer stock and/or in transit to dealers. All affected dealer inventory types with this SSP must be repaired prior to delivery. The number of affected units at your dealership can be seen in Inventory & Sales 2.0 in eMDCS and VIN list (via an internal MNAO campaign reporting) will also be provided to your District Service Manager by 5pm (Pacific Time) on March 24, 2026. Owner Notification: Mazda will notify owners of affected vehicles no later than April 24, 2026 or earlier. Vehicles will display in eMDCS as Open on March 24, 2026 and all vehicles can be repaired immediately.

NHTSA · boletín del fabricante11030704Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Subject: Notification of Special Service Program (SSPE0) - 2025 CX-50 Hybrid - Hybrid System Failure Displayed on Instrument Cluster (DTC P2530:12) Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Special Service Program on certain 2025 CX-50 Hybrid vehicles. Concern Outline: When starting the vehicle, a Master Warning Light may turn on and a hybrid system failure message (Hybrid System Malfunction Have the Vehicle Inspected) may be displayed in the instrument cluster. The hybrid system may not activate, and the engine may not start, along with the DTC P2530:12 [Hybrid Control] and other numerous DTCs. Repair Outline: Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS) by following TSB 30-001/26 repair instructions. ACTION ITEM - STOP DELIVERY: All dealer inventory types: New, Certified Pre-Owned, or Used can be sold but not delivered until repaired. There are approximately 50 new vehicles in dealer stock and/or in transit to dealers. All affected dealer inventory types with this SSP must be repaired prior to delivery. The number of affected units at your dealership can be seen in Inventory & Sales 2.0 in eMDCS and VIN list (via an internal MNAO campaign reporting) will also be provided to your District Service Manager by 5pm (Pacific Time) on March 24, 2026. Owner Notification: Mazda will notify owners of affected vehicles no later than April 24, 2026 or earlier. Vehicles will display in eMDCS as Open on March 24, 2026 and all vehicles can be repaired immediately.

NHTSA · boletín del fabricante11030703Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Subject: Notification of Special Service Program (SSPE0) - 2025 CX-50 Hybrid - Hybrid System Failure Displayed on Instrument Cluster (DTC P2530:12) Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Special Service Program on certain 2025 CX-50 Hybrid vehicles. Concern Outline: When starting the vehicle, a Master Warning Light may turn on and a hybrid system failure message (Hybrid System Malfunction Have the Vehicle Inspected) may be displayed in the instrument cluster. The hybrid system may not activate, and the engine may not start, along with the DTC P2530:12 [Hybrid Control] and other numerous DTCs. Repair Outline: Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS) by following TSB 30-001/26 repair instructions. ACTION ITEM - STOP DELIVERY: All dealer inventory types: New, Certified Pre-Owned, or Used can be sold but not delivered until repaired. There are approximately 50 new vehicles in dealer stock and/or in transit to dealers. All affected dealer inventory types with this SSP must be repaired prior to delivery. The number of affected units at your dealership can be seen in Inventory & Sales 2.0 in eMDCS and VIN list (via an internal MNAO campaign reporting) will also be provided to your District Service Manager by 5pm (Pacific Time) on March 24, 2026. Owner Notification: Mazda will notify owners of affected vehicles no later than April 24, 2026 or earlier. Vehicles will display in eMDCS as Open on March 24, 2026 and all vehicles can be repaired immediately.

NHTSA · boletín del fabricante11030702Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

DESCRIPTION Hybrid system failure displayed on meter with DTC P2530:12. (This TSB has been superseded to SSPE0). REPAIR PROCEDURE 1. Verify the customer concern. 2. Reprogram the PT_GWU with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS). Refer to MDARS ECU Reprogramming Procedure. WARNING: During module reprogramming, the engine cooling fan may turn on and off automatically. Keep hands, tools, and any objects clear of the cooling fan and other moving components in the engine bay during the reprogramming procedure. NOTE: Be sure to submit Diagnostic Information (ODR) data as it is a required item and will be checked during warranty claim submission. Instructions can be found under M-MDS -> MDARS (Uploading Diagnostic Information (ODR) Data). 3. Clear any other DTC. 4. Verify the repair by starting the engine (READY ON) and confirming there is no CHECK ENGINE light ON or abnormal warning lights present.

NHTSA · boletín del fabricante11030604Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 30-001/25 06/30/25 and 05/15/25 Some customers may experience a hybrid system failure message appearing on the meter and the engine does not start, along with other numerous DTCs. This is caused by improper logic of the Powertrain Gateway Unit. To eliminate this concern, the control software of Powertrain Gateway Unit has been modified.

NHTSA · boletín del fabricante11029239Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoFrenosNA

Boletín

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 04-001/25 02/06/25 Some vehicles may experience the front inner brake pads wear out faster than the outside. This accelerated pad wear may be caused by dirt and sand easily adhering to the inner friction surface of the disc while driving. To eliminate this concern, the shape of the dust cover and the front brake pad chamfer shape have been changed.

NHTSA · boletín del fabricante11029226Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoFrenosNA

Boletín

Some vehicles may exhibit a clunk noise from the rear brakes when starting to drive. This may be caused by the brake pads and the rear disc plates sticking together when the Electric Parking Brake (EPB) is engaged for an extended period while parked. Even after releasing the EPB, the adhesion remains. When the vehicle starts driving in this condition, the initial torque causes the brake pads to detach from the rotors, and the resulting impact is transmitted through the brake system to the vehicle body, resulting in a clunk noise. To eliminate this concern, the shape of the rear brake disc pads has been modified to increase the rigidity and reduce the impact force.

NHTSA · boletín del fabricante11021385Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoMotorNA

Boletín

Some customers may experience a hybrid system failure message appearing on the meter and the engine does not start, along with other numerous DTCs.

NHTSA · boletín del fabricante11019993Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

Some customers may experience a hybrid system failure message appearing on the meter and the engine does not start. This is caused by improper logic of the Powertrain Gateway Unit. To eliminate this concern, the control software of Powertrain Gateway Unit has been modified. Customers having this concern should have their vehicle repaired using the following repair procedure.

NHTSA · boletín del fabricante11019098Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoCaja de cambiosNA

Boletín

The new AWD rear differential DOES NOT come with a breather cap on the rear of the differential, therefore a new one will need to be ordered and installed when replacing the differential. NOTE: The breather threads have a sealant and locking compound that prevents it from being reused. Refer to GEPC for the correct part number of the Differential Breather. The instructions on MGSS will be updated soon to include replacing the breather when replacing the differential with a new unit.

NHTSA · boletín del fabricante11016235Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoFrenosNA

Boletín

Some vehicles may experience the front inner brake pads wear out faster than the outside. For example, the brake pads need to be replaced at less than 12,500 miles (20,000km). This accelerated pad wear may be caused by dirt and sand easily adhering to the inner friction surface of the disc while driving. To eliminate this concern, the shape of the dust cover has been changed and modification of the front brake pads is under study.

NHTSA · boletín del fabricante11014796Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoSuspensiónNA

Boletín

Antes de considerar que un volante presenta desgaste prematuro o un defecto, primero limpie el volante siguiendo las indicaciones de la información de reparación. Algunos vehículos pueden presentar manchas en el volante causadas por productos químicos, como las lociones para las manos.

NHTSA · boletín del fabricante11013792Años modelo 2025Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Función de ahorro de energía del transmisor de llave: Cuando la función de ahorro de energía del transmisor de llave está activada, se restringe el consumo de energía de la batería del transmisor, con lo que se prolonga la vida útil de su batería. NOTA: Algunos clientes pueden quejarse de que el motor no arranca. Esto puede deberse a que el cliente active sin querer la función de ahorro de energía del transmisor de llave.

NHTSA · boletín del fabricante11013788Años modelo 2025Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoSuspensiónNA

Boletín

Algunos clientes pueden reportar inquietudes con manchas en la superficie de la tapicería interior, especialmente en áreas de alto contacto (p. ej.: asientos, volante, paneles de puerta, palanca de cambios, etc.). Esto puede deberse a aceites de la piel o a productos químicos como las lociones para manos.

NHTSA · boletín del fabricante11011141Años modelo 2025Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoHabitáculoNA

Boletín

A customer may complain of a rattle noise from the right side of the dash. The noise may be coming from the passenger side airbag. Un cliente puede quejarse de un ruido de traqueteo proveniente del lado derecho del tablero. El ruido podría provenir del airbag del lado del pasajero.

NHTSA · boletín del fabricante11011139Años modelo 2025Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoMotorNA

Boletín

Some customers may experience the audio sound pausing when the engine restarts after i-stop operation under the following situations. The symptoms are caused by an improper part installation in the audio amplifier. A voltage drop error detection of the power source may be too sensitive.

NHTSA · boletín del fabricante11011135Años modelo 2023Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoFrenosNA

Boletín

Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.

NHTSA · boletín del fabricante11009644Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoFrenosNA

Boletín

This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle.

NHTSA · boletín del fabricante11008430Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoSuspensiónNA

Boletín

The Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. BSM system indicates vehicle on the opposite side. i-ACTIVSENSE indicator ring will not turn green Rear Cross Traffic Alert (RCTA) does not work Rear side radar sensor aiming may fail TPMS DTC(s) stored

NHTSA · boletín del fabricante11008423Años modelo 2025Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoSuspensiónNA

Boletín

Antes de considerar que un volante presenta desgaste prematuro o un defecto, primero límpielo siguiendo las indicaciones de la información de reparación. Algunos vehículos pueden presentar manchas en el volante causadas por productos químicos, como las lociones para las manos.

NHTSA · boletín del fabricante11007027Años modelo 2025Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Si encuentra cualquier tipo de problema eléctrico (por ejemplo, batería descargada, el motor no arranca, DTC(s) almacenados...), entreviste al cliente antes de proceder con el diagnóstico MGSS normal, preguntándole si se han instalado dispositivos aftermarket. Los dispositivos aftermarket pueden ser la causa del problema eléctrico. A continuación se muestran algunos ejemplos de problemas eléctricos inusuales causados por dispositivos aftermarket.

NHTSA · boletín del fabricante11007019Años modelo 2025Traducido automáticamente · original: inglésVer detalles →
Anteriores →

Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).