Boletín
Tire pressure monitoring system (TPMS) warning Light IlluminationMisure prevention logic
🔔 Crea una cuenta gratuita para recibir alertas por correo sobre Mazda 2 (todas las generaciones)
Los boletines técnicos (TSB) son instrucciones de reparación que los fabricantes envían a sus concesionarios sobre problemas conocidos. No son llamadas a revisión de seguridad, pero a menudo confirman una avería.
Tire pressure monitoring system (TPMS) warning Light IlluminationMisure prevention logic
Some customers may experience a SBS/SCBS, LAS/LDWS and/or HBC warning light on. A system error message may also be found in the center display. DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction). DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction) is stored in the FSC module and cannot be erased. This concern may be caused by a hardware failure of an internal device of the FSC, which results in a malfunction detection. To eliminate this concern, the production process of the FSC has been modified.
Algunos vehículos pueden presentar un chirrido en los frenos delanteros al frenar tras haber permanecido estacionados en condiciones de frío y humedad. Debido a un aumento de la resistencia de las pastillas en condiciones de frío, las pastillas vibran con facilidad, lo que provoca el ruido de chirrido.
A/C blows warm air. Some customers may complain about warm air from the climate cointrol vents. This may be caused by improper brazing (A) of the evaporator (B) causing a refrigerant leak fr om the joint between the tubes and the header (D)
If you experience issues with the current version of ID's such as missing tools or modules not showing after completing a network test, be advised that we are aware of these issues and are working to resolve them. As a counter measure, it is advised that you un-install ids and re-install version 103.00 and "do not update" until further notice.
Some vehicles may exhibit an unusual noise from around the drivers foot area when repeatedly turning the steering wheel to the left or right. A vibration is felt at the steering wheel when the noise occurs. This concern may be caused by a lack of grease application to the splines of the intermediate shaft at the production line. The grease application process has been improved.
Algunos clientes pueden quejarse de cualquiera de los siguientes puntos: 1. La pantalla del centro de infoentretenimiento no muestra el código de autorización (OTP) durante la inscripción del vehículo conectado en la aplicación MyMazda. 2. Funciones remotas inoperativas.
Algunos vehículos pueden presentar la luz de verificación del motor encendida con el DTC P0300:00 (Fallo de encendido aleatorio detectado) almacenado. Esto puede deberse a una detección errónea de un fallo de encendido causada por una lógica de control del PCM inadecuada. Para eliminar esta inquietud, se ha modificado la lógica de control del PCM.
Algunos clientes pueden notar que la luz de carga se enciende mientras conducen. Al inspeccionar, se encuentra almacenado en la memoria el DTC P2502:00 PCM (Mal funcionamiento en el voltaje generado por el generador). Esto puede deberse a una resistencia entre la placa de circuito y la masa. Cuando pasa una corriente eléctrica de alta intensidad, la posición del terminal de masa puede no ser suficientemente firme. Para eliminar esta preocupación, se ha modificado el software de control del convertidor CC-CC. Además, se ha revisado el procedimiento de producción. Se aumentó el par de apriete del terminal de masa y de la placa de circuito.
Some customers may experience a check engine light illumination at idle while stopped with DTC P0300:00 stored, resulting in rough idle conditions. P0300:00: Random misfire detected This concern is caused by improper engine control in the idle range. To eliminate the concern, the PCM control software has been modified.
Front/Rear stabilizer noise prevention
MultiModel (equipado con skyactivdrive) deterioro del color del ATF El color del líquido de transmisión automática (ATF) de un vehículo nuevo es azul. A medida que aumenta el kilometraje del vehículo, el color del ATF cambia. Este cambio de color no afecta el rendimiento del vehículo.
BSM Radar aiming cannot be performed after rightside BSM control module rekkplacement
Boletines de servicio técnico de Mazda, marzo de 2016: Algunos vehículos pueden presentar que la tela interior (A) se desprende en la parte trasera, lo que causa una apariencia deficiente y obstruye la visibilidad de la luneta trasera.
Mantenimiento.
MAZDA CONNECTED SERVICES - PREGUNTAS FRECUENTES (FAQ): Índice: Preguntas generales, Configuración y primeros pasos, Registro / Inscripción, Información general sobre Wi-Fi, Instrucciones de Wi-Fi, Período de prueba de Wi-Fi, Interacción con la aplicación, Problemas de servicio, Solución de problemas, Inspección del nivel de recepción, Procesos del concesionario, Condiciones en las que el arranque remoto del motor no funcionará, Condiciones en las que la función de arranque remoto apagará el motor, Videos educativos, Recursos
MAZDA CONNECTED SERVICES - PREGUNTAS FRECUENTES (FAQ): Índice: Preguntas generales, Configuración y primeros pasos, Registro / Inscripción, Información general sobre Wi-Fi, Cómo usar el Wi-Fi, Período de prueba del Wi-Fi, Interacción con la aplicación, Problemas de servicio, Solución de problemas, Inspección del nivel de recepción, Procesos del concesionario, Condiciones en las que el arranque remoto del motor no funcionará, Condiciones en las que la función de arranque remoto apagará el motor, Videos educativos, Recursos
Some customers may experience the CHECK ENGINE light ON with DTC P0089:00 (Spill valve control solenoid valve control circuit range/performance problem) stored. This is caused by improper control software of the PCM detecting a false error, even with normal fuel pressure operation. To correct this issue, the control software of the PCM has been modified.
Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the Active Driving Display. Replace the Active Driving Display.
Beginning with the CX-5 and Mazda6 models, grip type front and rear stabilizer bushings have been incorpo-rated for noise prevention purposes. If any type of grease or lubrication is applied to the bushings, it may create noise due to bushing slippage.
Some vehicles may experience the check engine light on with DTCs P2096:00, P2097:00 and/or P0524:00 that cannot be cleared by itself, and the check engine light stays on even if the detection condition has gone. P2096:00 - Air fuel too lean P2097:00 - Air fuel too rich P0524:00 - Engine oil pressure too low. This concern may be caused by improper PCM control logic. The PCM software has been modified to eliminate this concern.
Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the Active Driving Display.
New IDs software version 102.00 and Update 102.01 is now available on MS3 IDs update 102.00 and 102.01 is now available on MS3 under the "IDs/Infotainment" tab.
Procedimiento de reparación actualizado para el retiro del vehículo 0516j
Windshield washer fluid change - Factory filled windshield washer fluid has been changed to an ethanol type (yellow color) instead of athe conventional methanol type (blue color). This change is for European compliance Mazda has decided to make the change for all markets.
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).