Lectura libre · cuenta gratuita para colaborarSucesor de Anticars (2000)

Mazda 3

2003– · 4 generaciones · 63 averías documentadas · 8 mercados
Generaciones

Los boletines técnicos (TSB) son instrucciones de reparación que los fabricantes envían a sus concesionarios sobre problemas conocidos. No son llamadas a revisión de seguridad, pero a menudo confirman una avería.

Año del modelo
MercadoTodosNA
3 IV · 2019–
BoletínModeradoElectrónicaNA

Boletín

Algunos clientes pueden presentar la luz de Check Engine encendida con el DTC P0126:00 (Termostato atascado abierto) almacenado. Esto se debe a un control lógico incorrecto del PCM. Para eliminar el problema, se ha modificado el software de control del PCM. PROCEDIMIENTO DE REPARACIÓN 1. Verifique la queja del cliente. 2. Reprograme la ECU con el Mazda Modular Diagnostic System (M-MDS), utilizando el Mazda Diagnostic and Repair Software (MDARS). Consulte el Procedimiento de reprogramación de la ECU de MDARS. NOTA: Asegúrese de enviar los datos de información de diagnóstico (ODR), ya que es un elemento obligatorio que se verificará durante el envío de la reclamación de garantía. Las instrucciones se encuentran en M-MDS -> MDARS (Carga de datos de información de diagnóstico (ODR)). 3. Borre cualquier otro DTC. 4. Verifique la reparación arrancando el motor (READY ON) y confirmando que no haya luz de CHECK ENGINE encendida ni luces de advertencia anormales.

NHTSA · boletín del fabricante11030600Años modelo 2026Traducido automáticamente · original: inglésVer detalles →
3 IV · 2019–
BoletínModeradoElectrónicaNA

Boletín

Funciones remotas del vehículo conectado inoperativas y/o el motor no arranca debido a bajo voltaje de la batería. NOTA: SA-045/21 HA SIDO REEMPLAZADO POR SSPC7.

NHTSA · boletín del fabricante10200938Años modelo 2021Traducido automáticamente · original: inglésVer detalles →
3 IV · 2019–
BoletínModeradoElectrónicaNA

Boletín

Funciones remotas del vehículo conectado inoperativas y/o el motor no arranca debido a un voltaje bajo de la batería. Algunos clientes pueden experimentar los siguientes síntomas: Funciones remotas del vehículo conectado inoperativas después de la reparación SSPC6. Funciones remotas del vehículo conectado inoperativas en vehículos fabricados el 20 de marzo de 2021 o después.

NHTSA · boletín del fabricante10200937Años modelo 2021Traducido automáticamente · original: inglésVer detalles →
3 IV · 2019–
BoletínModeradoElectrónicaNA

Boletín

Funciones remotas del vehículo conectado inoperativas y/o el motor no arranca debido a bajo voltaje de la batería. Algunos clientes pueden experimentar los siguientes síntomas: Funciones remotas del vehículo conectado inoperativas después de la reparación SSPC6. Funciones remotas del vehículo conectado inoperativas en vehículos fabricados a partir del 1 de julio de 2021.

NHTSA · boletín del fabricante10200935Años modelo 2021Traducido automáticamente · original: inglésVer detalles →
3 IV · 2019–
BoletínModeradoElectrónicaNA

Boletín

Funciones remotas del vehículo conectado inoperativas y/o el motor no arranca debido a bajo voltaje de la batería. Algunos clientes pueden experimentar los siguientes síntomas: Funciones remotas del vehículo conectado inoperativas después de la reparación SSPC6. Funciones remotas del vehículo conectado inoperativas en vehículos fabricados el 1 de julio de 2021 o después.

NHTSA · boletín del fabricante10200934Años modelo 2021Traducido automáticamente · original: inglésVer detalles →
3 IV · 2019–
BoletínModeradoElectrónicaNA

Boletín

Algunos clientes pueden experimentar los siguientes síntomas: - Funciones remotas del vehículo conectado inoperativas después de la reparación SSPC6. - Funciones remotas del vehículo conectado inoperativas en vehículos fabricados a partir del 1 de julio de 2021. - El motor no arranca debido a bajo voltaje de la batería.

NHTSA · boletín del fabricante10199636Años modelo 2021Traducido automáticamente · original: inglésVer detalles →
3 III · 2013–2018
BoletínModeradoElectrónicaNA

Boletín

If you experience issues with the current version of ID's such as missing tools or modules not showing after completing a network test, be advised that we are aware of these issues and are working to resolve them. As a counter measure, it is advised that you un-install ids and re-install version 103.00 and "do not update" until further notice.

NHTSA · boletín del fabricante10185813Años modelo 2017Mostrado en inglés original · traducción pendienteVer detalles →
3 IV · 2019–
BoletínModeradoElectrónicaNA

Boletín

Algunos vehículos pueden presentar el DTC B14F0:76 [VCM] (Desviación de la cámara de detección frontal (FSC)) almacenado en memoria y la luz de advertencia i-ACTIVSENSE (ámbar) encendida después del reemplazo del BCM. Esto se debe a que el valor de aprendizaje de la alineación de la cámara de detección frontal (FSC) se inicializa después del reemplazo del BCM, debido a un mal funcionamiento del software de la FSC. Para corregir este problema, el software de la FSC será modificado para que no inicialice el valor de la alineación de la FSC después del reemplazo del BCM.

NHTSA · boletín del fabricante10166849Años modelo 2019Traducido automáticamente · original: inglésVer detalles →
3 IV · 2019–
BoletínModeradoElectrónicaNA

Boletín

Si un cliente llega con las siguientes inquietudes, comuníquese con la Línea directa para recibir asistencia. La luz de ADVERTENCIA DE PRESIÓN DE ACEITE y/o la luz de CHECK ENGINE encendidas, código(s) DTC P055F y/o P0524 almacenado(s), sin problemas de manejo ni ruidos mecánicos del motor, fuera del rango de VIN del TSB 01-020/18.

NHTSA · boletín del fabricante10165353Años modelo 2019Traducido automáticamente · original: inglésVer detalles →
3 IV · 2019–
BoletínModeradoElectrónicaNA

Boletín

Algunos vehículos pueden presentar el DTC U2120:00 y/o U2500:82 almacenados en la memoria y el indicador de advertencia de i-ACTIVSENSE (ámbar) encendido al girar el encendido después de que cualquier unidad de control electrónico (ECU) sea reprogramada o configurada mediante MDARS. NOTA: ECU significa unidades generales (cámaras y módulos), todas las cuales pueden reprogramarse. Esto se debe a un mal funcionamiento del software de la cámara de detección frontal (FSC). Para corregir este problema, se modificará el software de la FSC.

NHTSA · boletín del fabricante10164075Años modelo 2019Traducido automáticamente · original: inglésVer detalles →
3 IV · 2019–
BoletínModeradoElectrónicaNA

Boletín

Algunos vehículos pueden presentar el DTC B14F0:76 [VCM] almacenado en memoria y el indicador de advertencia i-ACTIVSENSE (ámbar) encendido después de reemplazar el BCM. DTC B14F0:76 [VCM]: Desviación de la cámara de detección frontal (FSC) (indicador de advertencia i-ACTIVSENSE (ámbar)). Esto se debe a que el valor de aprendizaje de la alineación de la cámara de detección frontal (FSC) se inicializa después del reemplazo del BCM, debido a un mal funcionamiento del software de la FSC. Para corregir esta condición, se modificará el software de la FSC para que no inicialice el valor de la alineación de la FSC después del reemplazo del BCM.

NHTSA · boletín del fabricante10163828Años modelo 2019Traducido automáticamente · original: inglésVer detalles →
3 IV · 2019–
BoletínModeradoElectrónicaNA

Boletín

SiriusXM Traffic Plus and Travel Link are displayed with Mazda in-vehicle factory navigation systems. Both of these services provide information in the U.S. & Canada. NOTE: SiriusXM Traffic Plus and Travel Link subscription is free of charge for 3 years only if equipped with factory installed navigation system. NOTE: 2019 Mazda3 is not equipped with factory installed navigation system, however, it is available as a dealer installed accessory. SiriusXM Traffic Plus and Travel Link are available on the 2019 Mazda3 Preferred Package and above, as a paid subscription. Traffic Plus feature requires in-vehicle navigation SD card. SiriusXM Satellite Radio trial subscription is free of charge for 3 months.

NHTSA · boletín del fabricante10154458Años modelo 2019Mostrado en inglés original · traducción pendienteVer detalles →
3 III · 2013–2018
BoletínModeradoElectrónicaNA

Boletín

Some customer may complain about the CHECK ENGINE light ON while driving. When diagnosed, it is found that the PCM has stored DTC P0456 for evaporative gas leakage (extremely low). This may be caused by leakage detected from the catch tank unit (1) at the purge valve (2).

NHTSA · boletín del fabricante10143956Años modelo 2017Mostrado en inglés original · traducción pendienteVer detalles →
3 III · 2013–2018
BoletínModeradoElectrónicaNA

Boletín

Some 2018 vehicles built after January 1, 2018 and equipped with Navigation may exhibit one of these concerns after the user inputs an address: A screen pops up that says "House number not found." After the user selects OK, the system finds the address or a nearby address.Instead of finding the correct address number the system adds a digit to the end of the number. Example: You enter 151 and the system comes back with 1510, 1511, 1515, 1516, etc. This only occurs with MAZDA CONNECT software version 59.00.532 or 59.00.540, which started being installed into vehicles in January 2018. The concern can be eliminated by installing MAZDA CONNECT software version 59.00.545 now available on MGSS.

NHTSA · boletín del fabricante10136765Años modelo 2018Mostrado en inglés original · traducción pendienteVer detalles →
3 III · 2013–2018
BoletínModeradoElectrónicaNA

Boletín

Algunos vehículos 2018 fabricados después del 1 de enero de 2018 y equipados con Navegación pueden presentar uno de estos problemas después de que el usuario introduce una dirección: aparece una pantalla que dice "Número de casa no encontrado". Al seleccionar OK, el sistema encuentra la dirección o una dirección cercana. En lugar de encontrar el número de dirección correcto, el sistema agrega un dígito al final del número. Por ejemplo: si introduce 151, el sistema devuelve 1510, 1511, 1515, 1516, etc. Esto solo ocurre con la versión 59.00.540 del software MAZDA CONNECT, que comenzó a instalarse en los vehículos en enero de 2018. El problema puede eliminarse instalando la versión 59.00.504 del software MAZDA CONNECT.

NHTSA · boletín del fabricante10134940Años modelo 2018Traducido automáticamente · original: inglésVer detalles →
3 III · 2013–2018
BoletínModeradoElectrónicaNA

Boletín

An updated version of the software for the Connectivity Master Unit (CMU) has become available. Under this MSP41, the CMU of applicable Mazda3 vehicles will be reprogrammed to the updated version using a USB memory stick. This software update includes some fixes for the Infotainment System as described below as well as some additional minor fixes. *A "Charging System Malfunction" message may be displayed on the center display by mistake (no charging system warning light in the instrument cluster). *The Voice Recognition may not activate even when pressing the TALK button. *The warning of "Check XM Antenna" may be continuously displayed on the center display.

NHTSA · boletín del fabricante10110987Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
3 III · 2013–2018
BoletínModeradoElectrónicaNA

Boletín

An updated version of the software for the Connectivity Master Unit (CMU) has become available. Under this MSP41, the CMU of applicable Mazda3 vehicles will be reprogrammed to the updated version using a USB memory stick. This software update includes some fixes for the Infotainment System as described below as well as some additional minor fixes.?A ?Charging System Malfunction? message may be displayed on the center display by mistake (no charging system warning light in the instrument cluster).?The Voice Recognition may not activate even when pressing the TALK button.?The warning of ?Check XM Antenna? may be continuously displayed on the center display.

NHTSA · boletín del fabricante10110989Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
3 II · 2008–2013
BoletínModeradoElectrónicaNA

Boletín

Some customers may complain about one or more of the following concerns. 1. Sms/text cannot be downloaded when onnected via bluetooth. 2. Operational concerns when playing a media device (ipod, usb stick etc.) connected via the usb port. A. After the ignition is turned on, it takes a long time to load all the data from the device before starting playback. Depending on the data volume, it can take up to several minutes. B. After the ignition is turned on, the playback always starts from the first track. It does not start from the last playing track/position when the ignition was turned off. C. Ipod error message for the apple ios 8.0 or higher software on iphone 4, 5, or 6. These concerns may be caused by the software of the bluetooth/hands-free module that controls the usb connection. To improve these concerns, the software of the bluetooth/hands-free module has been changed. Note: The updated software of the bluetooth/hands-free module will only address sms/text concerns for the apple iphone at this time.

NHTSA · boletín del fabricante10105462Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
3 II · 2008–2013
BoletínModeradoElectrónicaNA

Boletín

Some customers may complain about one or more of the following concerns. 1. Sms/text cannot be downloaded when connected via bluetooth. 2. Operational concerns when playing a media device (ipod, usb stick etc.) connected via the usb port. A. After the ignition is turned on, it takes a long time to load all the data from the device before starting playback. Depending on the data volume, it can take up to several minutes. B. After the ignition is turned on, the playback always starts from the first track. It does not start from the last playing track/position when the ignition was turned off. These concern may be caused by the software of the bluetooth/hands-free module that controls the usb connection. To improve these concerns, the software of the bluetooth/hands-free module has been changed. Note: The updated software of the bluetooth/hands-free module will only address sms/text concerns for the apple iphone at this time.

NHTSA · boletín del fabricante10100714Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
3 II · 2008–2013
BoletínModeradoElectrónicaNA

Boletín

Some customers may complain about one or more of the following concerns. 1. Sms/text cannot be downloaded when connected via bluetooth. 2. Operational concerns when playing a media device (ipod, usb stick etc.) connected via the usb port. A. After the ignition is turned on, it takes a long time to load all the data from the device before starting playback. Depending on the data volume, it can take up to several minutes. B. After the ignition is turned on, the playback always starts from the first track. It does not start from the last playing track/position when the ignition was turned off. These concern may be caused by the software of the bluetooth/hands-free module that controls the usb connection. To improve these concerns, the software of the bluetooth/hands-free module has been changed. Note: The updated software of the bluetooth/hands-free module will only address sms/text concerns for the apple iphone at this time. The updated software of the bluetooth/handsfree module will not address the ipod error message concern for the apple ios 8.0 or higher software on iphone 4, 5, or 6 at this time.

NHTSA · boletín del fabricante10099690Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
3 II · 2008–2013
BoletínModeradoElectrónicaNA

Boletín

Some customers may complain about one or more of the following concerns. 1. Sms/text cannot be downloaded when connected via bluetooth. 2. Operational concerns when playing a media device (ipod, usb stick etc.) connected via the usb port. A. After the ignition is turned on, it takes a long time to load all the data from the device efore starting playback. Depending on the data volume, it can take up to several minutes. B. After the ignition is turned on, the playback always starts from the first track. It does not start from the last playing track/position when the ignition was turned off. C. Ipod error message for the apple ios 8.0 or higher software on iphone 4, 5, or 6. These concerns may be caused by the software of the bluetooth/hands-free module that controls the usb connection. To improve these concerns, the software of the bluetooth/hands-free module has been changed. Note: The updated software of the bluetooth/hands-free module will only address sms/text concerns for the apple iphone at this time.

NHTSA · boletín del fabricante10099686Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
3 III · 2013–2018
BoletínModeradoElectrónicaNA

Boletín

Some customers may experience the following symptom:A.Warning message i-eloop malfunction (mazda3) or i-eloop inspection required (mazda6) is dis-played in the instrument cluster information display while driving.B.The master warning light and charging system warning light illuminate. C.Dtc p1794:00 (capacitor (i-eloop) system: Capacitor (i-eloop) malfunction) is stored in pcm memory.

NHTSA · boletín del fabricante10098382Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
3 III · 2013–2018
BoletínModeradoElectrónicaNA

Boletín

Some customers may experience one of the following two symptoms:1. Symptom (mazda6 only)a.Warning message i-eloop inspection required is displayed in the instrument cluster information display while driving.B.The master warning light will be illuminated. C.Dtc p1794:00 (capacitor (i-eloop) system: Capacitor (i-eloop) malfunction) will be stored in pcm mem-ory.

NHTSA · boletín del fabricante10098145Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
3 III · 2013–2018
BoletínModeradoElectrónicaNA

Boletín

Some customers may experience one of the following two symptoms: 1. Symptom (mazda6 only) a. Warning message i-eloop inspection required is displayed in the instrument cluster information display while driving. B. The master warning light will be illuminated.C. Dtc p1794:00 (capacitor (i-eloop) system: Capacitor (i-eloop) malfunction) will be stored in pcm memory.

NHTSA · boletín del fabricante10098016Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
3 III · 2013–2018
BoletínModeradoElectrónicaNA

Boletín

Some customers may experience one of the following two symptoms: 1. Symptom (mazda6 only) a. Warning message i-eloop inspection required is displayed in the instrument cluster information display while driving. B. The master warning light will be illuminated. C. Dtc p1794:00 (capacitor (i-eloop) system: Capacitor (i-eloop) malfunction) will be stored in pcm memory.2. Symptom (mazda3 and mazda6) a. Warning message battery management system inspection required and then "charging system malfunction/engine could stop unexpectedly is displayed in the instrument cluster information display after driving in the rain. B. The master warning light will be illuminated. The mazda6 warning indicator light and warning messages are shown below: C. The following dtcs are stored in pcm memory: Dtc p1794:00 - capacitor (i-eloop) system: Capacitor (i-eloop) malfunction dtc p2502:00 - generator system: Malfunction in voltage generated by generator

NHTSA · boletín del fabricante10098002Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
Anteriores →

Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).