Vehículos de motor - carrocería (medios de protección de los ocupantes)
La función de llamada de emergencia en el módulo de comunicación podría no estar activada.
🔔 Crea una cuenta gratuita para recibir alertas por correo sobre Mercedes-Benz CLA-Class III
Este expediente reúne las averías conocidas del Mercedes-Benz CLA-Class III, redactadas y documentadas por la comunidad. La lectura es libre; una cuenta gratuita permite colaborar. Una avería recibe el sello cuando suficientes colaboradores reconocidos la han validado.
La función de llamada de emergencia en el módulo de comunicación podría no estar activada.
Mercedes-Benz AG ha determinado que, en determinados vehículos CLA (plataforma 174 178), GLB (plataforma 244) y GLC (plataforma 540), es posible que la función de llamada de emergencia dentro del módulo de comunicación no esté habilitada.
Mercedes-Benz AG has determined that on certain CLA (174 178 platform) vehicles the seatbelt end fitting of the left front seat might not be mounted correctly.
Complaint At low A/C loads and low blower setting (min. to 2), loud hissing noises can be clearly heard from the area of the air conditioner box (particularly when the vehicle is stationary). Cause Discharge noises at the evaporator expansion valve which are transmitted into the interior compartment. Remedy Change in position of evaporator expansion valve Work instructions: Fabricate an adapter wiring harness as described below Parts required for modifying chiller valve module: A1748308402 evaporator A1748308502 refrigerant line A1748308602 refrigerant line A1748308902 refrigerant line A1748300003 expansion value A0239976345 profile sealing ring A0239976545 profile sealing ring A2478304602 mounting plate incl. installation material Work procedure 1. Prepare vehicle 1. Remove frunk as per WIS instructions AR88.40P1102CLA. 2. Remove old components 1. Remove evaporator as per WIS instructions AR83.30P5543CLA. 2. Remove following refrigerant line: a. A1748300002 b. A1748301702 c. A1748302002 d. A1748302402 3. Remove expansion valve as per WIS instructions AR83.30P5520CLA. 3. Install new components 1. Install HVAC adapter (A1748300003) using previously removed screws. (Installation material of mounting plate is not required) 2. Install new A/C lines as well as new evaporator (A1748308402). 3. Install adapter wiring harness XXX. 4. Secure adapter wiring harness using mounting plate. 4. Concluding work 1. Install/enter equipment code S18 on data card of vehicle. 2. Perform Xentry quick test and erase fault memory 3. Check vehicle to ensure that air conditioning system is functioning correctly.
Complaint 174 with MB.OS 2.1.3 Driver Assistance System Limited in Instrument Cluster and Does Not Self Extinguish. When vehicle is shut off, instrument cluster message appears for "Driver Assistance Systems Available". N62/5 with U142791 and Error ID 107 (Coding Mismatch). Cause Coding mismatch between the head unit (A26/17) and the intelligent drive controller (N62/5). Remedy Perform initial startup of the head unit (A26/17).
Complaint Display message in the instrument cluster: Driving assistance system function limited. This message can occur repeatedly while driving. Note: Fault code U160E97. Additionally, P161400 and/or C11009A may also be stored. In isolated cases, it may occur that only fault code C110004 is also stored. Affected control units can be any of the radar sensors (B29/21, 22, 23, or 24). If the DTC is present in any of the radar sensors after the production date May 12, 2026, please create a TIPS case. Cause Hardware defective. Remedy Replace radar sensor B29/21, 22, 23, or 24. Note: Multiple radar sensors in a vehicle may also be affected.
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).