Lectura libre · cuenta gratuita para colaborarSucesor de Anticars (2000)

Mercedes-BenzMercedes-Benz EQS SUV

2022– · 1 generaciones · 0 averías documentadas · 1 mercados
Generaciones
Todas las generacionesEQS SUV2022–1081

Todo sobre el Mercedes-Benz EQS SUV, todas las generaciones juntas: averías, llamadas a revisión, boletines técnicos y debates. Elige una generación para afinar.

Averías más graves

Aún no hay averías documentadas para esta selección.

Últimas llamadas a revisión

Ver todo (10) →
LlamadaModeradoElectrónicaNA

De vuelta sobre la prevención: Advertencias: Alerta externa/peatón

Mercedes-Benz USA, LLC (MBUSA) está retirando ciertos vehículos S-Class, EQE SUV, EQE, EQS SUV y EQS de 2022-2025. Por favor, consulte el informe de retirada para una lista completa de modelos. El software del Sistema de Alerta Acústica de Vehículos (AVAS) puede causar un sonido incorrecto de advertencia externa para peatones al marcha atrás. Por ello, estos vehículos no cumplen con los requisitos de la Norma Federal de Seguridad de Vehículos Motorizados número 141, "Requisitos mínimos de sonido para vehículos híbridos eléctricos."

NHTSA · Estados Unidos5 jun 202525V366000Años modelo 2023–2025Traducido automáticamente · original: inglésVer detalles →
LlamadaModeradoElectrónicaNA

Otros

Problema: En un pequeño número de vehículos, un problema de software podría hacer que el sistema de alerta del vehículo no funcione correctamente. Como resultado, el vehículo puede emitir un sonido incorrecto al dar marcha atrás. Riesgo para la seguridad: Un sistema de alerta de vehículo que no funcione correctamente podría aumentar el riesgo de accidente y/o lesiones. Acciones correctivas: Mercedes-Benz notificará a los propietarios por correo y te aconsejará llevar tu vehículo a un concesionario para actualizar el software del sistema acústico de alerta del vehículo.

Transport Canada30 may 20252025298Años modelo 2023Traducido automáticamente · original: inglésVer detalles →

Últimos boletines técnicos

Ver todo (81) →
BoletínLeveCarroceríaNA

Boletín

Complaint Traffic sign symbol for "Traffic Sign Assist" is blinking in instrument cluster without obvious cause usually with one of the following scenarios: Flashing without a speed limit (" "). Flashing when current vehicle speed is under speed limit. Flashing between US speed limit symbol and European speed limit symbol. NOTE: Verify that the concern falls under one of the attachment videos. If not, then it is outside of the scope of this LI. This also does not cover "Traffic Sign Inoperative" messages on the instrument cluster. Cause There are two identified reasons for this concern: 1. Country code information stored incorrectly at a particular geographic latitude range. 2. Incorrect reference data when the vehicle is started and a GPS signal is not immediately available. Remedy Update head unit software to latest version and the recheck function in the same location. If vehicle is still exhibiting one of the symptoms as described exactly as in the complaint section or as shown in the video attachments, open a TIPS case to the Body/Chassis/Entertainment inbox with the following: Video of the concern. Exact location (latitude and longitude is best)

NHTSA · boletín del fabricante11036608Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
BoletínLeveCarroceríaNA

Boletín

Complaint Tailgate opens unintentionally. Cause Accidental or unnoticed activation of the button to open the tailgate on the vehicle key. EXAMPLE: when stored in trouser pocket, handbag etc. Remedy As of the 6th generation, the vehicle key can be recoded so that the tailgate no longer opens as a result of a long press on the button, but by doubleclicking on the button instead. This reduces the likelihood of the button being activated accidentally or unintentionally. The recoding can be carried out as follows: 1. Add SA Code O19 into VeDoc (O for Oscar, not "zero") an XSS ticket may be necessary to add the SA code 2. Perform SCN coding of EIS N73 control unit 3. Deactivate the vehicle key (a successful deactivation is indicated by the LED lighting up 2x briefly and then 1x for a long period). 4. Place the vehicle key in the storage compartment on the key symbol and turn on the ignition. IMPORTANT: all other vehicle keys must be outside the recognition range of the vehicle when doing this! Perform steps 3 and 4 successively for all vehicle keys. Notes: 6th, 7th and 8th generation keys can be deactivated as follows: Up to modification year 22/1 by double clicking the "Lock button" As of modification year 22/1, by press and holding the Lock button", then doubleclick the Unlock button" at the same time. On model series 167, the storage compartment with the key symbol is located in the armrest. The SCN coding from the EZS is only transferred correctly to the vehicle key under the following conditions: Only one vehicle key is located in the vehicle, this key has been deactivated and it is positioned on the marking in the storage compartment for the data transfer. The costs for this adaptation are to be borne by the customer. For the newer BR 174, 178, 244, 248, 520, and 540, a software update must be initiated, as there is no way to perform SCN coding.

NHTSA · boletín del fabricante11036511Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Complaint The following most common complaints may be observed: Brief connectivity interruptions when using Apple CarPlay over Wi-Fi Audio cuts out Device not recognized No operation possible Cause There are multiple possible causes for an iPhone disconnecting from a vehicles head unit while using Apple CarPlay. These include hardware, software, and environmental factors: Environmental Interference External Sources: Passing under toll bridges, driving near airports, or areas with heavy electronic interference (e.g., as described in LI82.85-P-076157) can cause connection drops. Cellular Networks: Interference from nearby cell towers operating on similar frequencies (usually 2.4GHz or 5GHz) can disrupt the signal. Storage Location: Keeping your phone in a handbag or surrounded by other objects inside the vehicle can create physical or electronic interference. Device and Software Issues Head Unit Software/Hardware: Outdated firmware, bugs, or hardware faults in the vehicles head unit can prevent a stable connection. iPhone Software/Hardware: Similar issues in the iPhone, including buggy iOS updates or hardware problems, may affect performance. Reset or Reboot: Automatic rebooting or resetting of either the head unit or the iPhone will temporarily disrupt CarPlay. Connection and Settings Wired Connections: Faulty Cable: A damaged or poor-quality USB cable can cause intermittent or total loss of connection. USB Port Issues: Dust, debris, or physical damage in the USB port of either the head unit or the iPhone can also lead to disconnects. Wireless Connections: Intermittent Bluetooth/Wi-Fi: Unstable wireless communication (Bluetooth/Wi-Fi) can frequently break the Car- Play connection. Power Management: Battery Saver Mode: Enabling low power mode may restrict background processes, affecting CarPlay. Vehicles Electrical System: Unstable power delivery from the cars battery or electrical interruptions can cause the head unit to malfunction. Phone & App Configuration Phone Settings: Incorrect or conflicting settings (especially Bluetooth or Wi-Fi) on your iPhone can interfere with the CarPlay link. Third-Party Apps/Profiles: Installed apps or configuration profiles may conflict with CarPlays operation. Native apps are apple maps, apple music, audio books, apple news, podcasts, messages and phone. All other apps are considered third party apps. App Conflicts: Running conflicting apps that require similar system resources as CarPlay can cause instability. Mobile Data Plan: Streaming from online sources without sufficient mobile data can result in lost connectivity. Other Factors Heat & Overheating: If either the phone or the head unit overheats, they may disable certain functions to prevent damage, leading to disconnection. User Actions: Accidentally disconnecting the device in settings, or physically moving or bumping the phone or cable, may disrupt the connection. Remedy FUP6 (E605.8) software has been released for the following chassis: 118, 177, 243,247,206,254,167,294,295,296,223, 297. Flash available software for the head unit and test for function. The LI will be updated once available for the remaining chassis. If the complaint remains after the SW update please continue with the steps below. Guided Diagnostic Path for Apple CarPlay Connection Issues: Please follow the steps below to systematically diagnose and resolve CarPlay concerns:Update Devices: Ensure the iPhone is updated to the latest available iOS version. Ensure the vehicles head unit is updated to the latest software version available. Isolate the Issue: Check whether the symptom persists with another iPhone running the latest iOS version. Test both wireless and wired CarPlay connections: Does the issue only occur with wireless CarPlay? Does the wired connection to the phone function correctly? Further Troubleshooting Steps: Reboot the iPhone. See attachment for further instructions.

NHTSA · boletín del fabricante11036237Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →

Últimos hilos del foro

Aún no hay debates.

Las averías y los debates se clasifican por generación: elige una arriba para añadir el tuyo.

Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).