El generador de gas de los airbags del lado del pasajero puede estar defectuoso. Al activarse el airbag, pueden liberarse fragmentos metálicos que causen lesiones a los ocupantes.
El muelle de retención de posición del interruptor de encendido presenta, debido a un mantenimiento inadecuado de los equipos de moldeo, algunas unidades con rayaduras producidas durante el moldeo. Por ello, al repetir la operación de la llave de encendido, dicho muelle puede romperse. Si en la llave de encendido se colocan objetos pesados, como numerosos llaveros, las vibraciones durante la conducción pueden hacer que la llave gire fuera de la posición ON, lo que podría cortar la alimentación eléctrica del vehículo y provocar la parada del motor. Además, si se produce un accidente en este estado, los airbags no se desplegarán.
On certain vehicles, the inflator diffuser installed in certain side curtain air bag modules may not have been manufactured correctly. If the vehicle were involved in a crash that warranted side curtain airbag deployment, this could potentially lead to the diffuser detaching. If the diffuser were to detach, it could become a projectile in the occupant compartment, which could result in the side curtain airbag to not fully inflate. Both of these conditions could increase the risk of injury in a crash. Correction: Dealers will replace the side curtain air bag modules.
Transport Canada22 dic 20172017662Años modelo 2018Mostrado en inglés original · traducción pendienteVer detalles →
Nissan North America, Inc. (Nissan) is recalling certain 2018 Nissan Versa Note vehicles. During deployment of the side curtain air bag, a component of the air bag inflator may detach. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standards (FMVSS) number 214, "Side Impact Protection," and 226, "Ejection Mitigation."
NHTSA · Estados Unidos20 dic 201717V837000Años modelo 2018Mostrado en inglés original · traducción pendienteVer detalles →
Los vehículos afectados están equipados con infladores del «airbag» del acompañante que podrían haber sido montados con un propulsor fabricado de forma incorrecta. Esto podría provocar la rotura del inflador y el despliegue anómalo del «airbag» del acompañante en caso de colisión. Esto podría suponer un mayor riesgo de lesiones para el ocupante.
DVSA · Reino Unido28 nov 2017R/2017/226Años modelo 2005–2013Traducido automáticamente · original: inglésVer detalles →
null In the event of deployment of the passenger airbag, the inflator could rupture causing metal fragments to be produced which could cause injury to the occupants of the vehicle.
Safety Gate · UE26 jul 2017A12/1033/17Años modelo 2005–2013Mostrado en inglés original · traducción pendienteVer detalles →
On certain vehicles, the ring plate that secures the frontal passenger airbag cushion to the assembly housing may not have sufficient yield strength due to a manufacturing defect. This could cause the airbag cushion to separate from the ring plate when the airbag is deployed which could increase the risk of injury. Correction: Dealers will replace the front passenger side airbag module.
Transport Canada26 abr 20172017227Años modelo 2017Mostrado en inglés original · traducción pendienteVer detalles →
Nissan North America, Inc. (Nissan) is recalling certain 2017 Versa, and Versa Note vehicles. The ring plate that secures the air bag cushion to the passenger frontal air bag assembly may fail, possibly causing the air bag to deploy improperly in the event of a crash.
NHTSA · Estados Unidos26 abr 201717V275000Años modelo 2017Mostrado en inglés original · traducción pendienteVer detalles →
null The chemical composition in the gas generator of the curtain (head-protection) airbag may not be correct. It is therefore possible that, in the event of a side-on collision, the curtain airbag may not be deployed, and passengers in the vehicle may be injured.
Safety Gate · UE22 feb 2017A12/0237/17Años modelo 2016Mostrado en inglés original · traducción pendienteVer detalles →
null Activation of the driver's airbag may cause an abnormal increase in the internal pressure of the gas inflator and, in extreme cases, cause the casing of the gas inflator to break. This means that there is an increased risk of injury for the occupants.
Safety Gate · UE3 jun 2016A12/0722/16Años modelo 2012–2013Mostrado en inglés original · traducción pendienteVer detalles →
En caso de que se active el airbag del conductor, la presión interna del inflador podría aumentar de forma anómala y, en casos extremos, provocar la rotura de la carcasa del inflador del airbag del conductor. En casos extremos, esto podría provocar la dispersión de fragmentos metálicos.
DVSA · Reino Unido15 feb 2016R/2015/256Años modelo 2005–2011Traducido automáticamente · original: inglésVer detalles →
null In the event of deployment of the driver’s airbag, the internal pressure of the inflator may increase abnormally and, in extreme cases, cause the driver’s airbag inflator casing to rupture.
Safety Gate · UE22 dic 2015A12/1759/15Años modelo 2005–2011Mostrado en inglés original · traducción pendienteVer detalles →
Bij het activeren van de passagiersairbag kan in het ontstekingsmechanisme een te hoge druk ontstaan. Hierdoor kan de behuizing van het ontstekingsmechanisme barsten.
rdw2 nov 2017MGP170383Años modelo 2006–2013Mostrado en neerlandés original · traducción pendienteVer detalles →
Er kan corrosie optreden in het opblaasmechanisme van de bestuurdersairbag. Als gevolg daarvan kan er bij activeren van de airbag een te hoge druk ontstaan.
rdw23 mar 2016MGP160102Años modelo 2012–2013Mostrado en neerlandés original · traducción pendienteVer detalles →
Er kan corrosie optreden in het opblaasmechanisme van debestuurdersairbag. Als gevolg daarvan kan er bij activeren van de airbag een te hoge druk ontstaan.
rdw28 dic 2015MGP150435Años modelo 2006–2011Mostrado en neerlandés original · traducción pendienteVer detalles →
Er kan corrosie optreden in het opblaasmechanisme van de passagiersairbag. Als gevolg daarvan kan er bij activeren van de airbag een te hoge druk ontstaan.
rdw19 nov 2015MGP150175Años modelo 2006–2011Mostrado en neerlandés original · traducción pendienteVer detalles →
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 207 – Anchorage of Seats. Bolts securing the rear seat back latch may have been manufactured incorrectly. As a result, the seat anchorage could fail to meet the strength requirements of the standard. This could increase the risk of injury to rear seat occupants in a crash. Correction: Dealers will replace the bolts.
Transport Canada25 jul 20132013255Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
Nissan is recalling certain model year 2014 Versa Note vehicles manufactured April 23, 2013, through July 5, 2013. The rear seat latch bolts may have been manufactured incorrectly, reducing their strength.
NHTSA · Estados Unidos24 jul 201313V326000Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
A concern has been identified with the rear seat ISOFIX brackets of some E11 Note vehicles. In that the brackets may have been manufactured incorrectly with the potential that the brackets may not perform to the design intent in the case of a side impact. In addition the brackets may not conform to the required EC legislation.
DVSA · Reino Unido26 jul 2006R/2006/117Años modelo 2006Mostrado en inglés original · traducción pendienteVer detalles →
MLIT · Japón1 feb 20241154440Años modelo 2021–2023Mostrado en japonés original · traducción pendienteVer detalles →
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).