On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the driver airbag inflator on Saab 9-3 and 9-5 vehicles and replace the driver airbag module on Saturn Astra vehicles.
Transport Canada3 feb 20162016052Años modelo 2006–2008Traducido automáticamente · original: inglésVer detalles →
General Motors LLC (GM) está retirando del mercado ciertos vehículos Saab 9-3 del año modelo 2006-2011 fabricados entre el 31 de mayo de 2002 y el 15 de febrero de 2011, vehículos Saab 9-5 del año modelo 2006-2009 fabricados entre el 7 de junio de 2005 y el 28 de mayo de 2009, y vehículos Saturn Astra del año modelo 2008-2009 fabricados entre el 11 de abril de 2007 y el 24 de julio de 2008. Al desplegarse el airbag frontal del conductor, la presión interna excesiva puede provocar la rotura del inflador.
NHTSA · Estados Unidos3 feb 201616V063000Años modelo 2006–2008Traducido automáticamente · original: inglésVer detalles →
En determinados vehículos de pasajeros, las lengüetas de sujeción de la bomba de combustible que fijan los conductos de combustible resultaron dañadas durante la fabricación.
NHTSA · Estados Unidos7 mar 200707V087000Años modelo 2001–2005Traducido automáticamente · original: inglésVer detalles →
Certain passenger vehicles equipped with b308 6-cylinder gasoline engines may experience overheating and burnout of the isolated gated bipolar transistor (igbt) within the ignition discharge module (idm) due to increased susceptibility to electrical loads.
NHTSA · Estados Unidos26 oct 200606V410000Años modelo 2002–2003Mostrado en inglés original · traducción pendienteVer detalles →
Certain 2000-2002 Saab 9-3 and 9-5 model vehicles equipped with 4-cylinder gasoline engines, and 2001-2003 9-5 models equipped with 6-cylinder gasoline engines may experience overheating and burnout of the Isolated Gated Bipolar Transistor (IGBT) within the Ignition Discharge Module (IDM) due to increased susceptibility to electrical loads. Overheating of the IGBT occurs most often at engine start-up but may also occur while the engine is running. When the IDM fails on a 4-cylinder while it is running, the engine may stall without warning, with no ability to be restarted. When the IDM fails on a 6-cylinder engine while it is running, the driver will initially experience reduced power and rough operation because the engine will only be running on three cylinders. The check engine light will flash. If the driver continues, unburnt fuel in the exhaust can cause thermal damage to the catalytic converter. The engine may stall and not restart. Correction: Dealers will inspect and, if required, replace the IDM.
Transport Canada20 sept 20052005271Años modelo 2000–2003Mostrado en inglés original · traducción pendienteVer detalles →
Certain passenger vehicles equipped with b205/b235 4-cylinder gasoline engines and b308 6-cylinder gasoline engines may experience overheating and burnout of the isolated gated bipolar transistor (igbt) within the ignition discharge module (idm) due to increased susceptibility to electrical loads.
NHTSA · Estados Unidos14 sept 200505V399000Años modelo 2000–2002Mostrado en inglés original · traducción pendienteVer detalles →
On certain passenger vehicles, if an owner changes their wheels/tires between summer and winter using a steel wheel in the winter and an alloy wheel in the summer, it is possible for rust and contamination to build up on the wheel hub during the steel wheel usage. If this occurs and the contamination is not removed, it is possible that after the tire change service, some of this contamination could flake or grind away resulting in reduced clamping force of the wheel to the hub. Over several seasons, it is possible that this reduced force could result in fractures developing in the wheel bolts due to wheel to hub movement.
NHTSA · Estados Unidos13 ene 200303V006000Años modelo 1999–2003Mostrado en inglés original · traducción pendienteVer detalles →
Saab is recalling 57,389 my 2002-2008 9-5 series vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 201, "occupant protection in interior impact." during compliance testing, one of the upper interior occupant protection test points exceeded the standard's requirements.
NHTSA · Estados Unidos9 abr 200808V160000Años modelo 2002–2008Mostrado en inglés original · traducción pendienteVer detalles →
On certain vehicles, when changing back and forth between alloy and steel wheels (as for winter tires), rust and other contaminates may build up on the mating surface of the wheel hubs. If this surface is not cleaned between wheel changes, uneven torque forces may cause wheel bolts to fracture. Although this is most likely to happen during wheel change service, it is possible that the bolts may break later while the vehicle is being driven. Correction: Dealer will clean the hub and reinstall the wheel with improved bolts and attached washers that will eliminate the clamping force reduction.
Transport Canada23 dic 20022002247Años modelo 1999–2003Mostrado en inglés original · traducción pendienteVer detalles →
Certain vehicles do not comply with the requirements of CMVSS 210. The required markings for the child tether anchorage hooks are missing in the luggage compartment area. Correction: Dealers will install the required adhesive label to the luggage compartment loading floor in the near vicinity of the three anchorage hooks.
Transport Canada14 jun 20052005179Años modelo 2000–2005Mostrado en inglés original · traducción pendienteVer detalles →
Vehicle description: Certain passenger vehicles fail to comply with requirements of fmvss no. 208, "occupant crash protection." the air bag alert labels may not be permanently affixed as required by this standard.
NHTSA · Estados Unidos18 may 200101V168000Años modelo 2000–2001Mostrado en inglés original · traducción pendienteVer detalles →
Descripción del vehículo: Vehículos de pasajeros. Se omitió la etiqueta de alerta de airbag en la visera del lado del conductor. Esto no cumple con los requisitos del FMVSS nº 208, "protección contra accidentes de ocupantes".
NHTSA · Estados Unidos23 jun 199898V139000Años modelo 1999Traducido automáticamente · original: inglésVer detalles →
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).