En ciertos vehículos, un cortocircuito eléctrico dentro de la unidad de control electrónico (ECU) del airbag puede provocar el despliegue involuntario de los airbags delanteros y de los pretensores de los cinturones de seguridad. Corrección: Los concesionarios reemplazarán la unidad de control electrónico (ECU) del airbag. Nota: las piezas no estarán disponibles hasta abril de 2003.
Transport Canada15 nov 20022002212Años modelo 1995Traducido automáticamente · original: inglésVer detalles →
Certain passenger vehicles. Static electricity can build up within the passenger-side air bag module and create significant enough charge to cause an inadvertent air bag deployment during triggering events. Most of these triggering events have occurred in cooler, dry weather and have generally included dusting or wiping of the dashboard, starting the car, or closing the door. Unexpected air bag deployment can result in occupant injury. Correction: Dealers will install a front passenger-side air bag module grounding strap
Transport Canada3 jul 20012001191Años modelo 1998Mostrado en inglés original · traducción pendienteVer detalles →
Note: 5 door vehicles. These vehicles do not comply with c.M.V.S.S. 210 - seat belt assembly anchorages. Vehicles were assembled with a non heat treated outboard attachment plate on the safety belt which could in certain circumstances deform and detach from the seat anchorage. Correction: Front seat belts will be inspected and replaced if necessary.
Transport Canada7 may 19961996070Años modelo 1996Mostrado en inglés original · traducción pendienteVer detalles →
During static testing of belt anchorage points, the outboard attachment plate being used in the testing deformed and detached from the seat anchorage. This does not comply with fmvss no. 209, "seat belt assemblies" and no. 210, "seat belt assembly anchorages."
NHTSA · Estados Unidos3 may 199696V077000Años modelo 1996Mostrado en inglés original · traducción pendienteVer detalles →
On certain Saab 900 convertible, the steering column shaft may have been misaligned at the time of installation. This misalignment could cause a fatigue failure in one section of the shaft, with a subsequent loss of steering control. Correction: dealers will inspect and/or replace the steering column assembly.
Transport Canada18 mar 19961996046Años modelo 1995Mostrado en inglés original · traducción pendienteVer detalles →
En determinados vehículos de pasajeros, la unidad de control electrónico (ECU) del airbag está diseñada para detectar y discriminar los eventos de impacto frontal, ordenar el despliegue de los airbags y los pretensores de los cinturones de seguridad de manera oportuna, y realizar diagnósticos continuos del sistema de airbags del vehículo. Debido a un posible sellado insuficiente en la parte inferior de un condensador electrolítico, este puede presentar fugas de electrolito dentro de la ECU del airbag. Además, en entornos de alta humedad, el funcionamiento del aire acondicionado del vehículo puede provocar un enfriamiento rápido de la ECU, lo que a su vez puede causar la formación de condensación en la unidad.
NHTSA · Estados Unidos14 nov 200202V308000Años modelo 1995Traducido automáticamente · original: inglésVer detalles →
Vehicle description: Passenger vehicles. Static electricity can build up within the passenger-side air bag module and create enough of a charge to cause an inadvertent air bag deployment. Most of these inadvertent deployments have occurred in cooler, dry weather, and have generally included dusting or wiping of the dashboard, starting the car, or closing the door.
NHTSA · Estados Unidos2 jul 200101V222000Años modelo 1998Mostrado en inglés original · traducción pendienteVer detalles →
Vehicle description: Passenger vehicles. The instructions for properly aiming the headlighting system were omitted. This does not meet the requirements of fmvss no. 108, "lamps, reflective devices, and associated equipment."
NHTSA · Estados Unidos24 feb 199898V038000Años modelo 1994–1998Mostrado en inglés original · traducción pendienteVer detalles →
Note: Vehicles with 4-cylinder engines. The zinc-coated throttle control lever bushings in the throttle housing may corrode, causing the throttle lever to bind. This could result in the throttle plate not returning to the closed position when the accelerator pedal is released and a subsequent loss of throttle control. Correction: Zinc-coated throttle lever bushing in the throttle housing will be replaced with a nickel-coated bushing and bolt.
Transport Canada9 may 19971997099Años modelo 1994–1997Mostrado en inglés original · traducción pendienteVer detalles →
La corrosión alrededor del casquillo de la palanca de control del acelerador con recubrimiento de zinc puede hacer que la palanca del acelerador se atasque.
NHTSA · Estados Unidos21 mar 199797V046000Años modelo 1994–1997Traducido automáticamente · original: inglésVer detalles →
Note: Vehicles with 2.3l engines and bosch motronic 2.10.3 engine control modules. Defect: It is possible that an internal voltage drop can result in an intermittent fluctuating idle. This up-down idling may occur during the first 10-30 seconds after restarting the vehicle with a warm engine. Correction: Affected engine control modules will be replaced.
Transport Canada5 sept 19951995159Años modelo 1995Mostrado en inglés original · traducción pendienteVer detalles →
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).