Bulletin
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
🔔 Créez un compte gratuit pour recevoir les alertes e-mail sur Buick Regal (toutes les générations)
Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
This service bulletin advises the technician of a diagnostic test for a possible issue with a damaged OCV solenoid that may cause an oil leak and misfire, illuminating the MIL and setting DTCs P0300, P0302 and/or P0305.
This informational bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
This engineering information PI ends the need for information from the field on a oil leak from the oil pan.
This engineering information PI ends the need for information from the field on a oil leak from the oil pan.
This preliminary bulletin provides information on how to check for ice and/or snow build up and to install a radiator cover to correct the customers concern of reduced engine power and service engine message on.
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon and may also have an oil or coolant leak. Technician may find coolant or oil in a spark plug tube. If the Spark Plug Tube is leaking and it is determined that the oil or coolant is not coming from a leak above the spark plug then replace the cylinder Head, spark plug and coil.
This Preliminary information communicates a possible oil leak from the oil cooler and probable cause and repair instruction.
This preliminary bulletin provides a procedure to install a plug in the rear of the oil pan to correct the customers concern of an oil leak between the trans and engine.
General motors: 2010-2013 buick , chevrolet, gmc : This tsb contains an owner notification letter. Select document search button below. Some vehicles equipped with 2.4l engine may experience high oil consumption or frozen or plugged positive crankcase ventilation system (pcv) during cold weather, causing an oil leak in rear crankshaft seal. *lj
Gm: The engine may stall when coming to a stop or turning in hot weather. The engine will restart. There is a service procedure for reprogramming the ecm. *rm
Fuite de liquide de refroidissement au collecteur d'admission du moteur. *sc
Information regarding normal diagnostic if the opr valve is causing the leak air to be heard exiting the rubber dump hose, which is located on the left side of the fuel tank. *tt
Information on vehicles exhibiting an opr valve causing diagnostic trouble code p0442, or causing a leak, air will be heard exiting the rubber dump hose located on the left side of the fuel tank. *tt
Informations d’ingénierie.
Special Coverage Adjustment - Engine Balance Chain and Fuel Pump - Equipped with 2.4L Engine (LAF)
Special Coverage Adjustment - Engine Balance Chain and Fuel Pump - Equipped with 2.4L Engine (LAF)
Special Coverage Adjustment - Engine Balance Chain and Fuel Pump - Equipped with 2.4L Engine (LAF)
Service Update for Inventory Vehicles Only Engine Knock Noise - Drive Audit Expires November 30, 2014 - Equipped with 2.5L Engine (LCV/LKW) or 2.0L Engine (LTG)
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).