Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
NHTSA · bulletin constructeur11007196Années modèle 2007Affiché en anglais d’origine · traduction en attenteVoir le détail →
Cette communication d’information préliminaire fournit au technicien des informations sur les véhicules présentant un problème intermittent de décrochage sans manivelle, pas de démarrage ou de démarrage avec le voyant de sécurité allumé. Le technicien peut trouver les codes de diagnostic B3055, B3060 et/ou B3935. Le technicien ne doit remplacer aucune pièce pour ce problème. Si le problème ne peut pas dupliquer, demandez si le client utilise des dispositifs d’identification par radiofréquence lorsque le problème est présent. Le concessionnaire doit également orienter ses clients vers la section appropriée dans le manuel du propriétaire qui indique que l’appareil est conforme.
NHTSA · bulletin constructeur10237659Années modèle 2007Traduit automatiquement · original : anglaisVoir le détail →
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
NHTSA · bulletin constructeur10201252Années modèle 2007Affiché en anglais d’origine · traduction en attenteVoir le détail →
This Preliminary Information communication provides information to the technician that after installing a re-manufactured High Feature V6 engine the vehicle may rough running, idle surge, Check Engine Lamp or Camshaft Position sensor actuator codes. Technician will need to record the actual engine oil pressure at idle and engine compression readings. Technician will need to perform all testing listed in PIP4345A, if oil pressure and compression readings are within specifications. Technician will need to contact General Motors Technical Assistance Center for further assistance if the concern is not isolated.
NHTSA · bulletin constructeur10112521Années modèle 2007Affiché en anglais d’origine · traduction en attenteVoir le détail →
This Preliminary Information communication provides information to the technician about vehicles that have a message on the radio ?maximum number of phones are currently paired to the vehicle?. Dealer should advise the customer this is normal operation of the vehicle due to the maximum number of five phones can be paired to a vehicle.
NHTSA · bulletin constructeur10113321Années modèle 2008Affiché en anglais d’origine · traduction en attenteVoir le détail →
This Preliminary Information communication provides information to the technician about vehicles that have a message on the radio "maximum number of phones are currently paired to the vehicle". Dealer should advise the customer this is normal operation of the vehicle due to the maximum number of five phones can be paired to a vehicle.
NHTSA · bulletin constructeur10112465Années modèle 2008Affiché en anglais d’origine · traduction en attenteVoir le détail →
This Preliminary Information communication provides information to the technician about vehicles that the OnStar LED is staying on after the vehicle Retained Accessory Power has turned off and/or their Bluetooth phone stays connected after leaving the vehicle. Technician will need to perform a power cycle to the Vehicle Communication Interface Module. If the concern is gone, no further action is required. If the concern is still present after the power cycle technician will need to contact General Motors Technical Assistance Center for further assistance.
NHTSA · bulletin constructeur10112211Années modèle 2008Affiché en anglais d’origine · traduction en attenteVoir le détail →
This Preliminary Information communication provides information to the technician about vehicles that have a message on the radio "maximum number of phones are currently paired to the vehicle". Dealer should advise the customer this is normal operation of the vehicle due to the maximum number of five phones can be paired to a vehicle.
NHTSA · bulletin constructeur10112142Années modèle 2008Affiché en anglais d’origine · traduction en attenteVoir le détail →
Compass zone adjustment and calibration procedure during pre-delivery inspection. Various models including 2002-2004 light duty trucks. *tt update to include 2005 buick allure. *tt
NHTSA · bulletin constructeur10005564Années modèle 2005Affiché en anglais d’origine · traduction en attenteVoir le détail →
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).