Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)

Ford Explorer

1990– · 6 générations · 98 défauts documentés · 5 marchés
Générations

Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.

Année modèle
MarchéTousNA
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Some vehicles listed in the Model statement above may exhibit a no crank/no start condition where the customer cannot start their vehicle. The vehicle may also exhibit a "No Key Detected" message displayed on the instrument panel cluster (IPC), and no key fob works in the back up slot. The remote keyless entry (RKE) functionality will work to lock/unlock the vehicle.

NHTSA · bulletin constructeur11028830Années modèle 2025Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Quality improvements include: -Addresses a potential false coolant head temperature DTC that triggers an engine warning light

NHTSA · bulletin constructeur11017974Années modèle 2025Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

"Quality improvements include: -Addresses a potential false coolant head temperature DTC that triggers an engine warning light"

NHTSA · bulletin constructeur11017849Années modèle 2025Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Some 2022 Explorer vehicles equipped with a 3.3L full hybrid electric vehicle (FHEV) engine and built on 12-Jul-2022 and through 31-Oct-2022 may exhibit a coolant leak at the high voltage (HV) battery coolant cooler outlet hose. This may be due to the HV battery coolant cooler outlet hose contacting the bottom pulley of the accessory drive belt tensioner. To correct the condition, follow the Service Procedure to replace the damaged hose and install a cable tie.

NHTSA · bulletin constructeur10239631Années modèle 2022Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer V · 2010–2019
BulletinModéréÉlectroniqueNA

Bulletin

Some 2018 Explorer/Police Interceptor Utility vehicles equipped with Police, Base 100A, or XLT 200A package trim levels (Type 1 analog cluster in the Owner's Manual) built on 08-May-2018 and through 05-Aug-2018 may exhibit a parasitic battery drain of approximately 250 milliamps with the instrument panel cluster (IPC) possibly staying awake with the key off. This may result in a no crank/no start/discharged battery condition. To resolve the concern, reprogram the IPC using the latest software level using the Integrated Diagnostic System (IDS). Make sure the vehicle is connected to a battery charger. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · bulletin constructeur10216541Années modèle 2018Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Some 2017-2021 Ford and Lincoln vehicles equipped with 3.3L, 3.5L EcoBoost, or 5.0L engines may exhibit stalling, lack of power, low fuel rail pressure and/or DTCs P0087 or P008A after a repair was made that required the removal of the fuel line that connects the high-pressure fuel pump to the port injection rail, such as injector replacements or base engine repairs. This line must be installed in the correct orientation as it has an internal one-way check valve. To determine if the fuel line has been installed improperly, look at the position of the Oetiker clamp (stainless band clamped around the black fuel line). The clamp holds the one-way check valve in place and should be located closest to the end connected to the port injection rail. If the clamp is not closest to the port injection rail, remove and reinstall the line in the proper orientation.

NHTSA · bulletin constructeur10201579Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Ford Motor Company a déterminé que certains véhicules Ford F-150, F-Super Duty et Explorer de l'année modèle 2020, équipés d'une caméra de recul installée en usine par Ford, ne sont pas conformes à la norme fédérale de sécurité des véhicules automobiles n° 111 - Visibilité arrière. Contactez votre concessionnaire Ford local pour fixer une date de service afin d'effectuer le rappel. Reportez-vous à la communication ci-jointe de Ford pour de plus amples informations. Altec n'est pas en mesure d'effectuer cette réparation. Tous les travaux doivent être réalisés par un concessionnaire Ford agréé.

NHTSA · bulletin constructeur10194523Années modèle 2020Traduit automatiquement · original : anglaisVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Some 2020 Explorer Base vehicles equipped with blind spot information system (BLIS) and class III trailer tow package 52T may exhibit an illuminated BLIS indicator and/or inability to turn the BLIS system off. This may be due to the software in the instrument panel cluster (IPC). To correct the condition, perform a programmable module installation (PMI) on the IPC using the appropriate Ford diagnostic scan tool. For claiming, use causal part 10849 and applicable labor times from Section 10 in the Service Labor Time Standards (SLTS) Manual.

NHTSA · bulletin constructeur10184627Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Some 2017-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app , incomplete user authorization and/or no modem electronic serial number (ESN) displayed. To correct this condition prior to programming, remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · bulletin constructeur10179334Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Some 2020 Explorer/Aviator vehicles may exhibit a rattle type noise originating from the exhaust flexible pipe. This may be due to the natural harmonic frequency of the pipe. To correct the condition, follow the Service Procedure to install a worm gear clamp over the exhaust flexible pipe.

NHTSA · bulletin constructeur10179152Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Some 2020 Explorer/Aviator vehicles may exhibit a rattle type noise originating from the exhaust flexible pipe. This may be due to the natural harmonic frequency of the pipe. To correct the condition, follow the Service Procedure to install a worm gear clamp over the exhaust flexible pipe.

NHTSA · bulletin constructeur10177124Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Some 2017-2020 Model year vehicles equipped with 3.3L, 3.5L EcoBoost, or 5.0L engines may exhibit stalling, lack of power, low fuel rail pressure and/or DTCs P0087 or P008A after a repair was made that required the removal of the fuel line that connects the high-pressure fuel pump to the port injection rail, such as injector replacements or base engine repairs. This line must be installed in the correct orientation as it has an internal one-way check valve. To determine if the fuel line has been installed improperly, look at the position of the Oetiker clamp (stainless band clamped around the black fuel line). The clamp holds the one-way check valve in place and should be located closest to the end connected to the port injection rail. If the clamp is not closest to the port injection rail, remove and reinstall the line in the proper orientation.

NHTSA · bulletin constructeur10176110Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Some 2020 Ford and Lincoln vehicles may exhibit a symptom of no ability to schedule a remote start event using the FordPass or Lincolnway app. If only the scheduling portion of the remote start system is not functioning, please ensure that the latest level of SYNC software has been installed. If the remote start system is not functioning using the key fob and/or the on-demand remote start function from FordPass or Lincolnway application, refer to Workshop Manual (WSM), Section 303-06 for further diagnosis.

NHTSA · bulletin constructeur10176119Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer VI · 2019–
BulletinModéréÉlectroniqueNA

Bulletin

Some 2020 Explorer, Aviator, Ecosport, Mustang, Escape or Corsair may have a symptom of no ability to schedule a remote start event using the Fordpass or Lincolnway app. This may be due to the current level SYNC software installed. To correct this condition, program the SYNC module utilizing section 415 of the workshop manual. If no update is available or the problem persists after programming, verify that the Fordpass or Lincolnway app is activated properly as per the owners guide. For claiming, use causal part 14G371 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · bulletin constructeur10169913Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer V · 2010–2019
BulletinModéréÉlectroniqueNA

Bulletin

Some 2018 Explorer/Police Interceptor Utility vehicles equipped with Police, Base 100A, or XLT 200A package trim levels (Type 1 analog cluster in the Owner's Manual) built on 08-May-2018 and through 05-Aug-2018 may exhibit a parasitic battery drain of approximately 250 milliamps with the instrument panel cluster (IPC) possibly staying awake with the key off. This may result in a no crank/no start/discharged battery condition. To resolve the concern, reprogram the IPC using the latest software level of the appropriate Ford diagnostic scan tool. Make sure the vehicle is connected to a battery charger. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · bulletin constructeur10149757Années modèle 2018Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer V · 2010–2019
BulletinModéréÉlectroniqueNA

Bulletin

Some 2018 Explorer/Police Interceptor Utility vehicles equipped with Police, Base 100A, or XLT 200A package trim levels (Type 1 analog cluster in the Owner's Manual) built on 08-May-2018 and through 05-Aug-2018 may exhibit a parasitic battery drain of approximately 250 milliamps with the instrument panel cluster (IPC) possibly staying awake with the key off. This may result in a no crank/no start/discharged battery condition. To resolve the concern, reprogram the IPC using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · bulletin constructeur10144946Années modèle 2018Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer V · 2010–2019
BulletinModéréÉlectroniqueNA

Bulletin

Some 2018 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition, remove the TCU fuse for 5 minutes then reinstall. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.

NHTSA · bulletin constructeur10137130Années modèle 2018Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer V · 2010–2019
BulletinModéréÉlectroniqueNA

Bulletin

Some 2016-2017 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.

NHTSA · bulletin constructeur10119678Années modèle 2017Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer V · 2010–2019
BulletinModéréÉlectroniqueNA

Bulletin

Some 2016-2017 Ford/Lincoln vehicles SYNC 3 may exhibit an intermittent blank screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. During the update process the SYNC status bar shows Updating System Software for approximately 30 minutes. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or blank screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.

NHTSA · bulletin constructeur10115952Années modèle 2017Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer IV · 2005–2010
BulletinModéréÉlectroniqueNA

Bulletin

Ford: On some 2010 models there may be many symptoms such as an engine rattle, malfunction light, lack of power, no start, and runs rough. *rm updated 8/9/11. *pe

NHTSA · bulletin constructeur10037082Années modèle 2010Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer IV · 2005–2010
BulletinModéréÉlectroniqueNA

Bulletin

No start with instrument cluster inoperative. *tt

NHTSA · bulletin constructeur10020078Années modèle 2006Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer III · 2000–2005
BulletinModéréÉlectroniqueNA

Bulletin

Delayed crank with no start, diagnostic trouble codes (dtc) u0300/p0606/p2105/p2107, malfunction indicator module (mil) and wrench light on. *mj

NHTSA · bulletin constructeur10008125Années modèle 2004Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer III · 2000–2005
BulletinModéréÉlectroniqueNA

Bulletin

An intermittent no start and/or malfunction indicator lamp (mil) on with diagnostic trouble codes (dtc's) p1233, p1234, p1235, p1236, p1237 or p1238. *tt

NHTSA · bulletin constructeur10007389Années modèle 2004Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer III · 2000–2005
BulletinModéréÉlectroniqueNA

Bulletin

Subject regarding cigar lighter revised installation procedures. *tt

NHTSA · bulletin constructeur637573Années modèle 2002Affiché en anglais d’origine · traduction en attenteVoir le détail →
Explorer III · 2000–2005
BulletinModéréÉlectroniqueNA

Bulletin

Some vehicles may exhibit driveability conditions and / or check engine lamp illuminated with a diagnostic trouble p0455 (gross leak detected). *tt

NHTSA · bulletin constructeur630653Années modèle 2002Affiché en anglais d’origine · traduction en attenteVoir le détail →
Plus anciens →

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).