Complaint Check engine light on. One of the below fault codes is current in the engine control module (N3/10). P04DB29, P04DB31, P04DB79 Cause Open circuit or high resistance to crankcase vent line contact Remedy 1. Check the electrical connector for the relevant vent line contact switch noted below. Refer to attached photos of connection locations. 2. Ensure the bolted connection is secure and bolt can be torqued (9Nm). 3. Check continuity from vent line connection to ME control unit. Repair wire if damage is found. The circuit from ME provides 5V and is pulled to 0V when the ground connection is intact. M260 P04DB31- S88/15 P04DB79- S88/16 M264 P04DB31- S88/15 P04DB79- S88/16 P04DB29- S88/17 M270/M274 P04DB79- S88/5 Note: This repair is not warrantable if the connection was left loose during previous repair/maintenance.
NANHTSA · bulletin constructeur11008712
Bulletins techniques
Affiché en anglais d’origine · traduction en attente
Concerne: Mercedes-Benz A-Class III (Années modèle 2018) · Mercedes-Benz C-Class W205 (Années modèle 2018–2020) · Mercedes-Benz CLA-Class I (Années modèle 2019) · Mercedes-Benz E-Class V213 (Années modèle 2021) · Mercedes-Benz GLC I (Années modèle 2019) · Mercedes-Benz GLE-Class GLE (W167/C167) (Années modèle 2020) · Mercedes-Benz SLK-Class R172 (Années modèle 2016–2017)
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).