Park Assist Sensor 3 and 4 Harness Swap This bulletin provides information regarding the wire harness connectors for Park Assist Sensors #3 and #4. The harnesses for these sensors are visually identical and may have been interchanged during vehicleassembly. If diagnosis indicates a concern related to Park Assist Sensors #3 or #4, or associated wiring, visually inspect the harness connections to verify correct installation before proceeding with further repair Fig. 1. If the connectors are found to be swapped, release the harnesses from the retaining clips as necessary, disconnect, and reinstall each connector to the correct sensor location. Ensure harnesses are properly secured after repositioning.
NANHTSA · bulletin constructeur11033334
Bulletins techniques
Affiché en anglais d’origine · traduction en attente
Concerne: Dodge Ram IV (2009) (Années modèle 2026)
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).