Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)
Se connecterCréer un compte
NANHTSA · bulletin constructeur10091623

Bulletins techniques

Affiché en anglais d’origine · traduction en attente

Some vehicles may exhibit a lack of power and/or misfires during pdi. This may be due to a low fuel level in the fuel tank. Verify there is at least a tank of fuel in the tank. If not, fill to tank, start the engine and drive the vehicle for a minimum of 1 mile to purge any air remaining in the fuel system, then re-test. Note: Fill the fuel tank with adequate fuel ( tank or more) prior to driving the vehicle to exit delivery mode. Continuing to drive the vehicle with very low fuel levels may cause damage to the fuel pump.If the concern is resolved by adding fuel, do not contact the technical assistance hotline or create a pqm alert. If the concern is not resolved by adding fuel, contact the technical assistance hotline.

Concerne: Mazda CX-9 II (2013) (Années modèle 2016)

Avis officiel ↗

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).