Lettura libera · account gratuito per contribuireErede di Anticars (2000)

Acura CL

1996–2003 · 2 generazioni · 17 difetti documentati · 1 mercati
Generazioni
Anno modello
MercatoTuttiNA
CL II (2001) · 2000–2003
RichiamoCriticoAbitacoloNA

Airbag

Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Note: This recall is for airbag inflators that may have been installed when the vehicle had the steering wheel airbag replaced. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.

Transport Canada17 gen 20202020015Anni modello 2001–2002Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL I (1996) · 1996–1999CL II (2001) · 2000–2003
RichiamoCriticoAbitacoloNA

Airbag

Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.

Transport Canada17 gen 20202020014Anni modello 1998–2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL II (2001) · 2000–2003
RichiamoCriticoAbitacoloNA

Air bags:Frontal:Driver side:Inflator module

Honda (American Honda Motor Co.) is recalling certain 2001-2002 Acura 3.2CL, 2000-2003 Acura 3.5RL, 2000-2001 Acura 3.2TL, Honda CR-V and Honda Odyssey, 2001-2002 Acura MDX and 2000 Accord Coupe, Accord Sedan, Civic Coupe, and Civic Sedan vehicles. These vehicles may have received a replacement driver frontal air bag module as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.

NHTSA · Stati Uniti17 gen 202020V027000Anni modello 2001–2002Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL I (1996) · 1996–1999CL II (2001) · 2000–2003
RichiamoCriticoAbitacoloNA

Airbag: Frontale: Lato guidatore: Modulo gonfiatore

Honda (American Honda Motor Co.) sta richiamando alcune Acura 2.2CL del 1998, Acura 2.3CL 1998-1999, Acura 3.0CL 1998-1999, Acura 3.2CL e Acura MDX 2001, Honda Accord Coupe, Accord Sedan, Civic Sedan, Odyssey e Acura 3.5RL 1999-2000, Civic 3.2TL 1999-2000, Civic Coupé 1996-2000, CR-V 1997-2000, EV Plus 1997-1998 e Isuzu Oasis 1998-1999. Questi veicoli erano equipaggiati con gonfiatori per airbag non-azide driver (NADI) e non contenevano propellente nitrato di ammonio stabilizzato di fase (PSAN). A causa di un problema di produzione, gli gonfiatori NADI potrebbero assorbire umidità, causando la rottura dei gonfiatori o il sottogonfiamento del cuscinetto dell'airbag.

NHTSA · Stati Uniti17 gen 202020V026000Anni modello 1998–2001Tradotto automaticamente · originale: ingleseVedi dettagli →
CL II (2001) · 2000–2003
RichiamoCriticoAbitacoloNA

Air bags:Frontal:Driver side:Inflator module

Honda (American Honda Motor Co.) is recalling certain 2003 Acura 3.2CL, 2002-2003 3.2TL, 2003-2006 MDX, 2001-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot and 2006 Ridgeline vehicles. These vehicles are equipped with driver frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

NHTSA · Stati Uniti27 giu 201919V499000Anni modello 2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL II (2001) · 2000–2003
RichiamoCriticoAbitacoloNA

Airbag

Issue: On certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: This recall only affects certain vehicles that had a Takata airbag inflator installed during a previous airbag recall or collision repair. Safety Risk: In a crash where the airbag deploys, there could be an increased risk of injury. Corrective Action: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.

Transport Canada7 mar 20192019117Anni modello 2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL II (2001) · 2000–2003
RichiamoCriticoAbitacoloNA

Airbag:Frontale:Lato guidatore:Modulo di gonfiaggio

Honda (American Honda Motor Co.) sta richiamando specifici veicoli Acura 3.2CL del 2003, ILX del 2013-2016, ILX Hybrid del 2013-2014, MDX del 2003-2006, RDX del 2007-2016, 3.2TL del 2002-2003, TL del 2004-2006 e del 2009-2014, ZDX del 2010-2013, nonché Honda Accord del 2001-2007 e del 2009, Civic del 2001-2005, Civic Hybrid del 2003-2005, Civic GX NGV del 2001-2005, CR-V del 2002-2007 e del 2010-2011, Element del 2003-2011, Fit del 2007, Odyssey del 2002-2004, Pilot del 2003-2008 e Ridgeline del 2006-2014. I veicoli interessati hanno ricevuto un nuovo gonfiatore dell'airbag del conducente come parte di una precedente soluzione di richiamo per i gonfiatori Takata, oppure un nuovo modulo dell'airbag del conducente contenente lo stesso tipo di gonfiatore come ricambio di servizio. A causa di un errore di fabbricazione, in caso di incidente che richieda l'attivazione dell'airbag frontale del conducente, questi gonfiatori potrebbero esplodere.

NHTSA · Stati Uniti6 mar 201919V182000Anni modello 2003Tradotto automaticamente · originale: ingleseVedi dettagli →
CL II (2001) · 2000–2003
RichiamoCriticoAbitacoloNA

Air bags:Frontal:Driver side:Inflator module

Honda (American Honda Motor Co.) is recalling certain model year 2001-2007 Accord, 2001-2005 Civic, 2001-2004 Honda Civic GX, 2003-2005 Honda Civic Hybrid, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot, 2006 Ridgeline, 2003 Acura 3.2CL, 2003-2006 Acura MDX, and 2002-2003 Acura 3.2TL vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.

NHTSA · Stati Uniti28 mag 201515V320000Anni modello 2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL II (2001) · 2000–2003
RichiamoCriticoAbitacoloNA

Airbag

On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2014567. Correction: Dealers will inspect/replace the driver's frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844

Transport Canada27 mag 20152015225Anni modello 2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL II (2001) · 2000–2003
RichiamoCriticoAbitacoloNA

Airbag

Honda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information: <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2015225">Click here for more information</a>

Transport Canada15 dic 20142014567Anni modello 2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL II (2001) · 2000–2003
RichiamoModeratoCambioNA

Powertrain

Certain operating conditions can result in heat build-up between the countershaft and secondary shaft second gears in the automatic transmission, eventually leading to gear tooth chipping or, in very rare cases, gear breakage can occur. Gear failure could result in transmission lock-up. Correction: On vehicles with 24 000 kms or less, the dealer will update the transmission with a simple revision to the oil cooler return line to increase lubrication to second gear. On vehicles with more than 24 000 kms, the dealer will inspect the transmission to identify gears that have already experienced discoloration due to overheating. If discolouration exists, the transmission will be replaced. If discolouration is not present, the dealer will perform the revision to the oil cooler return line.

Transport Canada23 apr 20042004143Anni modello 2001–2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL II (2001) · 2000–2003
RichiamoModeratoCambioNA

Power train:Automatic transmission

On some mini vans, sport utility and passenger vehicles, certain operating conditions can result in heat build-up between the countershaft and secondary shaft second gears in the automatic transmission, eventually leading to gear tooth chipping or gear breakage.

NHTSA · Stati Uniti15 apr 200404V176000Anni modello 2001–2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL I (1996) · 1996–1999
RichiamoModeratoFreniNA

Other

On certain vehicles, the ignition switch may wear excessively and prevent proper interlock operation, making it possible to turn the ignition key to the off position and remove the key without shifting the transmission to Park. If the vehicle operator does not shift to Park before removing the key and fails to engage the parking brake, the vehicle could roll and a crash could occur. Correction: Dealer will perform the required inspection and necessary repairs.

Transport Canada10 nov 20032003276Anni modello 1998–1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL I (1996) · 1996–1999
RichiamoModeratoElettronicaNA

Electrical system:Ignition:Switch

On certain passenger vehicles and mini vans, the ignition switch may wear excessively and prevent proper interlock operation, making it possible to turn the ignition key to the "off" position and remove the key without shifting the transmission to "park."

NHTSA · Stati Uniti27 ott 200303V423000Anni modello 1998–1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL II (2001) · 2000–2003
RichiamoModeratoMotoreNA

Engine and engine cooling:Engine

On certain minivans, sedans, coupes, and sport utility vehicles equipped with v6 engines, a timing belt tensioner pulley on the water pump is misaligned and could cause the timing belt to contact a bolt on the cylinder head. Eventually the belt could be damaged and fail.

NHTSA · Stati Uniti28 ago 200202V226000Anni modello 2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL I (1996) · 1996–1999
RichiamoModeratoElettronicaNA

Elettrico

Su alcuni veicoli, i contatti elettrici nell'interruttore di accensione possono deteriorarsi a causa dell'elevata corrente elettrica che attraversa l'interruttore all'avviamento del veicolo. Contatti usurati potrebbero causare lo spegnimento del motore senza preavviso, aumentando il rischio di incidente. Correzione: I concessionari sostituiranno l'interruttore di accensione.

Transport Canada24 mag 20022002096Anni modello 1997–1999Tradotto automaticamente · originale: ingleseVedi dettagli →
CL I (1996) · 1996–1999
RichiamoModeratoElettronicaNA

Sistema elettrico:Accensione:Interruttore

Su alcune berline, coupé, hatchback e sport utility vehicle, i contatti elettrici dell'interruttore di accensione possono deteriorarsi a causa dell'elevata corrente elettrica che attraversa l'interruttore all'avviamento del veicolo.

NHTSA · Stati Uniti16 mag 200202V120000Anni modello 1997–1999Tradotto automaticamente · originale: ingleseVedi dettagli →
CL I (1996) · 1996–1999
RichiamoModeratoSospensioniNA

Suspension:Front:Control arm:Lower ball joint

Vehicle description: Passenger vehicles. Certain vehicles were manufactured with ball joints that can prematurely wear out and, in the worse case, the ball joint would separate causing the front suspension to collapse.

NHTSA · Stati Uniti10 mag 199999V069000Anni modello 1997–1998Mostrato in inglese originale · traduzione in attesaVedi dettagli →
CL I (1996) · 1996–1999
RichiamoModeratoCambioNA

Power train:Automatic transmission:Park/neutral start interlock switch

Vehicle description: Passenger vehicles (honda accord sedans manufactured from september 18, 1997 to january 10, 1998; coupes manufactured december 11, december 15, 1997, and january 5, 1998; acura 2.3cl manufactured october 22, 1997 through january 7, 1998). During manufacturing, the casting die caused an irregularity in the right-side transmission cover. This irregularity can limit the movement of the parking pawl actuation level and prevent adequate engagement of the parking gear pawl. This does not comply with fmvs no. 114, "theft protection."

NHTSA · Stati Uniti10 feb 199898V018000Anni modello 1998Mostrato in inglese originale · traduzione in attesaVedi dettagli →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).