On certain 318I, 318IS, 325I, 325IS, 525I, 525IT, 535I, 735I, 735IL, 750IL, 850I and M5, the locking tab for the airbag contact ring in the steering wheel assembly could break without warning. If this happens it is possible that the contact ring wiring could break. This would cause the readiness indicator lamp ("SRS" or "AIRBAG") to illuminate and in such a case the airbag would not be available for deployment in a frontal impact. Correction: Locking tab will be replaced with one of a different design.
Transport Canada7 ott 19961996159Anni modello 1991–1992Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Su alcuni veicoli, il guasto di un componente del sistema di raffreddamento come termostato, pompa dell'acqua o cinghia della ventola può causare un aumento significativo della temperatura del liquido refrigerante e della pressione del sistema. L'aumento della pressione del sistema potrebbe causare la formazione di una crepa o la separazione di una giuntura nell'estremità del nucleo del riscaldamento, che causerebbe l'espulsione di refrigerante caldo dal nucleo del riscaldamento. Questo fluido caldo potrebbe entrare in contatto con gli occupanti dell'auto, causando possibili lesioni personali e/o appannamento delle superfici interne dei finestrini. Correzione: Il tappo del radiatore sarà sostituito con un nuovo tappo di design per evitare l'accumulo di eccessiva pressione nel sistema di raffreddamento.
Transport Canada14 ott 19981998197Anni modello 1988–1993Tradotto automaticamente · originale: ingleseVedi dettagli →
On certain 525I, 535I, 735I, 735IL and 750IL vehicles, the front seat center fold-down armrest may contact and damage the seatbelt buckle if the seat back is moved forward to an upright position while the armrest is locked in the down position (horizontal). If this occurs, the release button may be held in the down position, preventing the seatbelt from being latched during the buckle-up operation. Non-latching of the seatbelts will increase the risk of personal injury in the event of a crash. Correction: Front seat safety belt buckles will be replaced with shorter ones that are not susceptible to damage by contact with the armrest.
Transport Canada27 feb 19901990037Anni modello 1988–1990Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Under certain conditions, front seat center, fold-down arm rest may contact the safety belt buckle, causing damage to the release button and preventing the belt tongue from latching when buckling up.
NHTSA · Stati Uniti30 gen 199090V016000Anni modello 1988–1990Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain 725I, 735IA and 750IL vehicles, on the front seats, the seatbacks may not have been fully seated on the recliner arms. This could result in looseness of, or noise in the seat. In extreme cases, during a severe rear impact, the seatback may not support the occupant and increase the risk of injury. Correction: Seatbacks will be inspected and properly seated if required.
Transport Canada25 ago 19881988124Anni modello 1988Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The driver and/or passenger seatbacks may not have been fully attached to the seat base reclining arms (attaching brackets).
NHTSA · Stati Uniti11 ago 198888V135000Anni modello 1988Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).