Questo fascicolo raccoglie i difetti noti della BMW Serie 8 (E31), scritti e documentati dalla comunità. La lettura è libera; un account gratuito permette di contribuire. Un difetto ottiene il sigillo quando abbastanza contributori affidabili lo hanno convalidato.
I proprietari segnalano spesso problemi di exterior lighting su quest'auto (12 reclami), ma nessuno ne ha ancora spiegato la causa. La conosci?Scrivi la scheda
12 owners in the United States reported problems with the exterior lighting of this car to NHTSA (model years 1991–1997), typically at around 81,000 miles. Most often named: headlights (83%). Reported consequences: 1 fire.
✓ Analisi Mecafile di dati ufficiali1991–1997Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, failure of a cooling system component such as thermostat, water pump or fan belt can result in a significant increase in coolant temperature and system pressure. Increased system pressure could result the formation of a crack or separation of a seam in the heater core end piece which would cause hot coolant to be expelled from the heater core. This hot fluid could contact car occupants resulting in possible personal injury and/or fogging of the interior window surfaces. Correction: Radiator cap will be replaced with a new design cap in order to avoid buildup of excessive pressure in the cooling system.
Transport Canada14 ott 19981998197Anni modello 1991–1995Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Passenger vehicles. A malfunction or failure of a coolant system component, such as a thermostat, water pump, or fan belt, can result in significantly increased coolant temperature and system pressure. If the indications of a critical overheating condition is not noticed by the driver, it is possible that damage to, or failure of, a coolant system component could occur.
NHTSA · Stati Uniti4 ago 199898V178000Anni modello 1991–1995Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain 318IC, 318IS, 318TI, 325I, 325IC, 325IS, 525I, 525IT, 530I, 530IT, 540I, 740I, 740IL, 840CI and M3, the cruise control and throttle cable are attached to the same throttle valve actuating lever at the throttle housing. It is possible that the plastic bushing on either cable could break causing the outer cable housing to separate from the bushing. Throttle pedal application without cruise control engagement could cause the outer tube to catch on the edge of the broken bushing resulting in the throttle valve remaining partially open. If this were to occur, the car might not decelerate as expected and a crash could occut. Correction: A spring clip will be installed on the outer tube of each cable to prevent dislodgment from the bushing.
Transport Canada9 ott 19971997173Anni modello 1994–1997Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The condenser on affected vehicles may develop a leak due to contact corrosion (pitting) between the plate and the flat tubes. *tw
NHTSA · bollettino del costruttore52199Anni modello 1993Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0).