Bollettino
BMW AG has issued a Delivery Stop: KNEE AIRBAG.
🔔 Crea un account gratuito per ricevere avvisi via e-mail su BMW X6 (tutte le generazioni)
I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.
BMW AG has issued a Delivery Stop: KNEE AIRBAG.
A check control message for the restraint system appears. In the instrument cluster, the red air bag warning light lights up permanently. One of the following fault codes is stored in the ACSM (air bag control unit): 930949 - Knee airbag, driver: short circuit to negative terminal 93094F - Knee airbag, front passenger: short circuit to negative terminal 93094C - Knee airbag driver's side: Resistance too great 930952 - Knee airbag, front passenger: Resistance too great.
A check control message for the restraint system appears. In the instrument cluster, the red air bag warning light lights up permanently.
The customer states: The drivers seat will not return to its last saved position. No seat memory. The heated seats settings in the menu are missing/different than in their previous BMW vehicle. They canno longer select, under the climate rules, at what temperature Fahrenheit the heated seats willautomatically turn on. Certain other apps and functions are not available The drivers seat moves to an unknown memory position
Delivery Stop Front Lower Seat Belt
Customer states that the seat heating and/or cooling doesnt meet his/her expectations.
It was discovered that an indentation or crack on the driver and/or passenger seat crossmember rear outer dome (circled ;viewed looking frontwards) can form. Note: The rear inner dome on both the driver and passenger seat crossmembers are not affected.
?The front seat will not calibrate/initialize, and the stored faults cannot be deleted.
A check control message (CCM) for the restraint system (Air bag) appears.
BMW AG has issued a Delivery Stop (effective March 13, 2023) on certain Model Year 2023 BMW X6 SAC vehicles that were produced between March 1, 2023, and March 7, 2023. It was discovered that an indentation or crack on the driver and/or passenger seat crossmember rear outer dome (circled; viewed looking frontwards) can form.
Milky-white stains (discolorations) in the leather are observed in the second-row seat bottom, backrests and/or headrests. Refer to attachment for details. This only affects vehicles with the Merino leather.
Milky-white stains (discolorations) in the leather are observed in the second-row seat bottom, backrests and/or headrests.
Front seat will not calibrate/initialize, and the stored faults cannot be deleted
SECOND ROW SEAT LEATHER CLOUDY/DISCOLORED: Milky-white stains (discolorations) in the leather are observed in the second-row seat bottom, backrests and/or headrests.
SEAT FAILS TO INITIALIZE DUE TO MISSING END STOP: Front seat will not calibrate/initialize.
SEAT HEATING NOT ACTIVATED WHEN ENGINE IS STARTED USING REMOTE STARTING SYSTEM: When preheating/precooling the vehicle via the remote starting system (Remote Engine Start), the seat heating on the driver's side is not activated.
SEAT HEATING NOT ACTIVATED WHEN ENGINE IS STARTED USING REMOTE STARTING SYSTEM: When preheating/precooling the vehicle via the remote starting system (Remote Engine Start), the seat heating on the driver's side is not activated.
NEW ECU VALIDATION NEEDED AFTER REPLACING CERTAIN CONTROL MODULES: With introduction of the new Headunit HU-H3 (MGU Media Graphics Unit), there is a new protection mechanism against tampering. If one or more of the following components needs to be replaced, the secure connection between them must be re-established: MGU TCB Telematic Communication Box (ATM-02) RSE Rear Seat Entertainment and/or KOMBISP18 instrument cluster Prior to re-establishing this connection, an electronic certificate must be created in the BMW backend for importing into the Vehicle. After the replacement of one of the mentioned Modules, the Control Module needs a valid certificate for it to communicate with the other Modules.
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).