Lettura libera · account gratuito per contribuireErede di Anticars (2000)

BMW X6

2007– · 3 generazioni · 11 difetti documentati · 6 mercati
Generazioni

I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.

Anno modello
MercatoTuttiNA
X6 III · 2019–
BollettinoModeratoAltroNA

Bollettino

L'acqua perde sul tappeto dal sistema di riscaldamento e aria condizionata (HVAC) dopo che il veicolo ha subito riparazioni precedenti.

NHTSA · bollettino del costruttore11039090Anni modello 2026Tradotto automaticamente · originale: ingleseVedi dettagli →
X6 III · 2019–
BollettinoModeratoAltroNA

Bollettino

The cylinder head cover was not installed correctly at the assembly plant.

NHTSA · bollettino del costruttore11038936Anni modello 2027Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoFreniNA

Bollettino

After replacement of the Integrated Braking system (IB)/Power Brake the total distance covered might belower than when handed over to the workshop for the repair.

NHTSA · bollettino del costruttore11036380Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoElettronicaNA

Bollettino

Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications.

NHTSA · bollettino del costruttore11034449Anni modello 2025Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoSospensioniNA

Bollettino

When turning the steering wheel while stationary or when driving on uneven roads; cracking, creaking, or knocking noises may be heard.

NHTSA · bollettino del costruttore11031574Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoFreniNA

Bollettino

It was determined that your vehicle was fitted with a brake booster that potentially has a faulty hydraulic valve. This may result in a modified pedal feel and a sporadic red Check Control message. The brake booster should be replaced.

NHTSA · bollettino del costruttore11030319Anni modello 2025Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoAltroNA

Bollettino

Various external influences can cause premature aging of the tension strut hydro-mount elastomer; which can lead to cracks in the material, and leakage.

NHTSA · bollettino del costruttore11029047Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoCambioNA

Bollettino

The right rear drive shaft may not have been manufactured correctly during production and may break. In the event of a fault, you will hear significant noises in the area of the rear axle and the driving performance will be noticeably reduced. At the same time, warning lights and Check Control messages will be shown on the Central Display.

NHTSA · bollettino del costruttore11028294Anni modello 2025Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoFreniNA

Bollettino

The wheel bearing and the brake disc are not correctly aligned; are not concentric (circled). When applicable work is being performed, it is therefore difficult to remove the wheel bolts from, or fasten them into the wheel bearing hub.

NHTSA · bollettino del costruttore11025672Anni modello 2026Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoSospensioniNA

Bollettino

When turning the steering wheel while stationary or when driving on uneven roads; cracking, creaking, or knocking noises may be heard.

NHTSA · bollettino del costruttore11021817Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoSospensioniNA

Bollettino

The seat lumbar system Massage will not function if the module needs to be initialized. This can occur toeither the drivers and/or passenger side seat. Here is a list of possible faults: Seat pneumatics module front right SPNM _ VR 025908 - SPNMVR: Control unit is not coded 02590B - SPNMVR: Control unit is not encoded for the vehicle 806927 - SPNMVR: Installation location not taught in Seat pneumatics module front left SPNM _ VL 025308 - SPNMVL: Control unit is not coded 02530B - SPNMVL: Control unit is not encoded for the vehicle 8067A7 - SPNMVL: Installation location not taught in Seat Module Driver FAS SMFA 80301E - No seat adjustment because of engine start conditions Seat Module Passenger BFS SMBF 802C1E - No seat adjustment because of engine start conditions Seat Module Drivers Side Rear FAH SMFAH 802E1E - No seat adjustment because of engine start conditions Seat Module Passenger Side Rear BFH SMBFH 802A1E - No seat adjustment because of engine start conditions

NHTSA · bollettino del costruttore11020931Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoFreniNA

Bollettino

After programming from the I-Levels between 24-03-505 and lower than 24-03-540 to I-Level 24-11-530 or higher, the following CCM may be displayed: CCM-2525: Brake system. Drive at moderate speed

NHTSA · bollettino del costruttore11020910Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoSospensioniNA

Bollettino

The air line on the air suspension supply system may not be properly installed. In the event of a fault, residual pressure is maintained in the struts and corresponding check control message.

NHTSA · bollettino del costruttore11019565Anni modello 2025Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoSospensioniNA

Bollettino

The air line on the air suspension supply system may not be properly installed. In the event of a fault, residual pressure is maintained in the struts and corresponding check control message.

NHTSA · bollettino del costruttore11018563Anni modello 2025Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoFreniNA

Bollettino

Rumori stridenti dei freni avvertiti dal retrotreno a bassa velocità, cioè vicino all'arresto, in guida con frequenti fermate e ripartenze; durante il parcheggio o le manovre.

NHTSA · bollettino del costruttore11018518Anni modello 2024Tradotto automaticamente · originale: ingleseVedi dettagli →
X6 III · 2019–
BollettinoModeratoFreniNA

Bollettino

After replacement of the Integrated Braking system (IB)/Power Brake the total distance covered might be lower than when handed over to the workshop for the repair.

NHTSA · bollettino del costruttore11013438Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoElettronicaNA

Bollettino

BMW AG has decided on a service campaign for certain vehicles from the G0x, G12 and G20 series. Please have the starter motor checked and, if necessary, replaced in the vehicles concerned (according to the vehicle identification number selection) if possible before vehicle delivery. If vehicles have already been delivered, please have the measure carried out the next time the vehicles enter the workshop. A bolting fault on the long bolt screws can cause the magnets in the starter motor to twist. As a result, the power of the starter motor decreases. As a result, the engine does not start.

NHTSA · bollettino del costruttore11013434Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoFreniNA

Bollettino

Dopo la sostituzione del sistema frenante integrato (IB)/servofreno (Power Brake), la distanza totale percorsa potrebbe risultare inferiore rispetto a quella registrata al momento della consegna del veicolo all'officina per la riparazione.

NHTSA · bollettino del costruttore11013040Anni modello 2024Tradotto automaticamente · originale: ingleseVedi dettagli →
X6 III · 2019–
BollettinoModeratoFreniNA

Bollettino

Improved diagnostic software for the brake system.

NHTSA · bollettino del costruttore11008992Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoElettronicaNA

Bollettino

Due to an installation error, the crankshaft sensor connector may not have been properly locked. In very rare cases, the plug connection may become disconnected. If no signal is sent by the crankshaftsensor, the engine will switch to emergency operation and a Check Control message will occur.

NHTSA · bollettino del costruttore11008104Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoElettronicaNA

Bollettino

There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages.

NHTSA · bollettino del costruttore11006766Anni modello 2023Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoElettronicaNA

Bollettino

Please have the starter motor checked and, if necessary, replaced in the vehicles concerned (according tothe vehicle identification number selection) if possible before vehicle delivery. If vehicles have already been delivered, please have the measure carried out the next time the vehiclesenter the workshop. A bolting fault on the long bolt screws can cause the magnets in the starter motor to twist. As a result, thepower of the starter motor decreases. As a result, the engine does not start.

NHTSA · bollettino del costruttore11006719Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoElettronicaNA

Bollettino

There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages.

NHTSA · bollettino del costruttore11002858Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoSospensioniNA

Bollettino

Incorrect adjustment of the front and rear axles may result in steering wheel drift or increased tire wear onthe vehicle.

NHTSA · bollettino del costruttore11000635Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
X6 III · 2019–
BollettinoModeratoSospensioniNA

Bollettino

At low outside temperatures (below 40 degrees F) and slow driving speeds (i.e. when parking, maneuvering)with a large steering angle, the front end can be slightly axially misaligned.

NHTSA · bollettino del costruttore11000563Anni modello 2024Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Meno recenti →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).