Veicoli a motore e rimorchi - carrozzeria (porte, cofano, portelloni di carico)
Il cofano potrebbe non bloccarsi quando è chiuso, a causa della corrosione del meccanismo di chiusura e del mancato aggancio del primo fermo.
🔔 Crea un account gratuito per ricevere avvisi via e-mail su Chevrolet Matiz (tutte le generazioni)
Il cofano potrebbe non bloccarsi quando è chiuso, a causa della corrosione del meccanismo di chiusura e del mancato aggancio del primo fermo.
During air bag deployment it is possible that the passenger's airbag inflator may separate from its housing. Whilst unlikely it is possible that the separated inflator could cause slight injury to the front seat passenger.
La molla del dispositivo di sicurezza del cofano non è sufficientemente resistente alla corrosione. Di conseguenza, la molla può corrodersi.
null Vehicles may experience reduction in brake performance due to sticking of the valve within the ABS module (Anti-lock braking system). Brakes may feel spongy and stopping distances may become longer.
In de ABS-unit kan corrosie optreden, waardoor er gelvorming ontstaat in de module. Hierdoor is het mogelijk, dat een klep in de unit niet correct sluit.
Sui veicoli interessati la valvola ABS può bloccarsi. I freni continueranno a funzionare, ma il conducente potrebbe avvertire una sensazione di pedale spugnoso durante l'azionamento del pedale del freno oppure una corsa eccessiva del pedale.
Il sistema frenante è dotato del tipo errato di liquido dei freni. Di conseguenza può verificarsi corrosione nell'unità ABS, con formazione di gel nel modulo. Ciò rende possibile che una valvola nell'unità non si chiuda correttamente.
Incorrect type of brake fluid installed at production could cause internal corrosion of the ABS module. This corrosion can lead to a gel build up inside the module which may affect the closing motion of one of the valves. There will be no external loss of fluid or reduction in fluid level but it is possible the driver could feel excessive brake pedal travel. In some circumstances there may be reduced braking performance.
□ 국토해양부(장관 : 권도엽)는 한국지엠(주)에서 제작?판매한 승용자동차의 제동장치와 등화장치에서 결함이 발견되어 자발적으로 시정(리콜) 한다고 밝혔다. □ 결함원인은 `06.5.30~`10.4.26일 사이에 제작된 마티즈 등 4차종 45,424대에서 ABS(Anti-Lock Brake System) 제어장치(모듈레이터)내 일부 부품에서 부식이 발생하여 정상적으로 브레이크를 밟더라도 제동이 늦어지거나 차량의 정지거리가 증가하는 브레이크 밀림현상이 나타나는 결함이 발견되었기 때문이다.
특별한 조건(시동을 끈 후 15초 이내 재시동을 한 경우)에서 충돌 시 조수석 에어백이 전개 되지 않을 수 있는 가능성이 발견
앞면창유리 와이퍼의 내부 연결대가 눈, 얼음 등으로 얼어 있는 상태에서 저속 작동시 강도저하로 변형되어 와이퍼가 작동되지 않을 가능성이 있는 결함
운전석에 장착된 에어백 고정홈 2개중 1개가 완전히 고정되지 않은 자동차가 있어 차량 충돌시 에어백이 떨어질 가능성이 있는 결함
It has been identified that due to a manufacturing error the front seatbelt buckles may not lock when the user attempts to fasten the seatbelt thus rendering the seatbelt inoperative.
- 라세티 프리미어(435대) : ‘08.11.5~09.7.16일에 제작되어 판매한 자동차 - 결함내용: ABS(anti-lock brake system)가 장착되지 않은 일부 자동차의 전자장치(소프트웨어) 오류로 브레이크 오일이 최저수준 이하일 경우에도 경고등이 점등되지 않아 안전기준을 만족하지 못한 결함 - 다마스(6,714대) : ‘08.3.25~09.7.27일에 제작되어 판매한 자동차 - 결함내용: 앞 창유리 서리제거 기능이 안전기준을 만족하지 못한 결함 - 마티즈(2,363대) : ‘09.6.8~09.7.31일에 제작되어 판매한 자동차 - 결함내용: 앞좌석 안전밸트가 곧바로 체결되지 않을 뿐 아니라 장기간 사용할 경우에는 체결이 쉽게 이탈될 가능성이 있는 결함
ㅇ 제작사 : 지엠대우오토앤테크놀로지(주) ㅇ 결함대상자동차 및 결함원인 - 마티즈CVT(23,114대): 02.5.29~03.1.26에 제작된 자동차 CVT부품인 풀리포지션센서(PPS)의 불량으로 변속이 원할히 이루어지지 않아 40km/h이상 가속불량 ㅇ 결함시정 개시일 : 06.3.10 ㅇ 결함시정방법 : 무상수리 ※문의 : 지엠대우오토앤테크놀로지(주) 고객센터(080-728-7288)
ㅇ 제작사 : 지엠대우오토앤테크놀로지(주) ㅇ 결함대상자동차 및 결함원인 - 마티즈(42,609대): 04.12.20~06.1.15에 제작된 자동차 후퇴등이 부적절한 위치에 1개만 설치되어 후방에서 잘보이지 않음 ㅇ 결함시정 개시일 : 06.2.6 ㅇ 결함시정방법 : 무상수리 ※문의 : 지엠대우오토앤테크놀로지(주) 고객센터(080-728-7288)
ㅇ 제작사 : 지엠대우오토앤테크놀로지(주) ㅇ 결함대상자동차 및 결함원인 - 마티즈(734대): 04.7.1~04.10.18에 제작된 자동차 에어백가스를 분출하는 일부 부품이 에어백 전개시 튀어나와 승차자에게 상해를 입힐 우려가 있음 ㅇ 결함시정기간 : 05.11.28~07.5.27(1년6개월간) ㅇ 결함시정방법 : 무상수리 ※문의 : 지엠대우오토앤테크놀로지(주) 고객센터(080-728-7288)
ㅇ 제작사 : 지엠대우오토앤테크놀로지(주) ㅇ 결함대상자동차 및 결함원인 - 마티즈CVT(14,064대): 99.10.15~01.10.28에 제작된 자동차 변속기내 먼지 유입으로 풀리를 가변시켜 속도를 변환하는 슬라이드기어가 고착되어 변속되지 않음 ㅇ 결함시정기간 : 05.9.15~07.3.14(1년6개월간) ㅇ 결함시정방법 : 무상수리 ※문의 : 지엠대우오토앤테크놀로지(주) 고객센터(080-728-7288)
ㅇ 제작사 : 지엠대우자동차(주) ㅇ 결함대상자동차 및 대수 : 마티즈 190,171대 ㅇ 결함내용 : 엔진 냉각수 교환주기 부적정으로 엔진내부 녹발생 및 부품성능 저하 ㅇ 대상자동차 : '98.2.1-'00.4.23까지 제작 판매된 차량 ㅇ 결함시정기간 : '04.3.23-'05.9.22(1년6개월간) ㅇ 결함시정방법 : 무상수리
ㅇ 제작사 : 지엠대우자동차(주) ㅇ 결함대상자동차 및 대수 : 마티즈 7,394대 ㅇ 결함내용 : 일부 수동변속기 장착 자동차의 클러치 케이블 연결고리 절손 ㅇ 대상자동차 : '02.10.1-'03.11.23까지 제작 판매된 차량 ㅇ 결함시정기간 : '04.3.23-'05.9.22(1년6개월간) ㅇ 결함시정방법 : 무상수리
○ 건설교통부는 대우자동차에서 생산·판매중인 마티즈 CVT(Continuously Variable Transmisson) 경승용차에 제작결함이 발생하여 자발적인 리콜을 실시한다고 밝혔다. ○ 금번의 자발적 리콜사유는 무단변속기(CVT)내에 양방향의 동력을 단속하는 2 Way 클러치의 샤프트가 고착되어 변속이 원활하지 않은 결함으로서, - 시정대상은 '01.10.29∼'02. 5.28까지 생산된 19,729대로서 결함시정기간은 오는 12. 2일부터 1년간 대우자동차 전국의 직영 A/S사업소 및 지정정비공장에서 무상으로 관련부품을 교환하는 리콜을 실시한다고 밝혔다. ※ A/S센타 문의전화 (☎ 대우 080-728-7288)
클러치 전자자동체어장치의 오류, 부품교환
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).