Bollettino
Ispezione perdite di refrigerante dalla pompa dell'acqua Hemi
🔔 Crea un account gratuito per ricevere avvisi via e-mail su Dodge Challenger (tutte le generazioni)
I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.
Ispezione perdite di refrigerante dalla pompa dell'acqua Hemi
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): **P0420 - Catalyst System Efficiency Below Threshold Bank 1. P0430 - Catalyst System Efficiency Below Threshold Bank 2.** P0456 - EVAP System Small Leak. NOTE: If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. This bulletin involves reprogramming the PCM with the latest available software."
Spark Plug Re-Gap to Resolve Misfire Symptoms Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0300 - Multiple Cylinder Misfire. P0301 - Cylinder 1 Misfire. P0302 - Cylinder 2 Misfire. P0303 - Cylinder 3 Misfire. P0304 - Cylinder 4 Misfire. P0305 - Cylinder 5 Misfire. P0306 - Cylinder 6 Misfire. P0307 - Cylinder 7 Misfire. P0308 - Cylinder 8 Misfire. P0420 - Catalyst System Efficiency Below Threshold Bank 1. P0430 - Catalyst System Efficiency Below Threshold Bank 2. The customer may also comment on one or more of the following: Excessive vibration. Engine runs rough. Lack, or loss of power. Engine misfire.
MIL/CEL is on with Excessive Vibration / Lack or Loss of Power / Engine Misfire.
Flash: Transmission Control Module (TCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set: ? P0729-00 - Automatic Transmission 6th Gear Incorrect Ratio. The customer may also experience one or more of the following: ? Vehicle is in limp mode. ? Rough shift. This bulletin involves reprogramming the TCM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0455 - EVAP System Large Leak. ? P0456 - EVAP System Small Leak. ? P0440 - General EVAP System Failure. ? P0441 - EVAP Purge System Performance. This bulletin involves reprogramming the PCM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0455 - EVAP System Large Leak. ? P0456 - EVAP System Small Leak. ? P0440 - General EVAP System Failure. ? P0441 - EVAP Purge System Performance. This bulletin involves reprogramming the PCM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0455 - EVAP System Large Leak. ? P0456 - EVAP System Small Leak. ? P0440 - General Evap System Failure. ? P0441 - EVAP Purge System Performance. This bulletin involves reprogramming the PCM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0455 - EVAP System Large Leak. ? P0456 - EVAP System Small Leak. ? P0440 - General Evap System Failure. ? P0441 - EVAP Purge System Performance. This bulletin involves reprogramming the PCM with the latest available software.
Underbody Heat Shield Missing Battery Compartment (12-Volt) hot to touch (can result in 12-Volt battery deterioration). This bulletin involves installing an underbody heat shield.
Hellcat Redeye Fender Badges Missing Both Hellcat Redeye fender badges (Fig. 1) are missing. This bulletin involves installing both Hellcat Redeye fender badges.
Vibration When Braking
Flash: Security Gateway Module (SGW) Updates This bulletin involves reprogramming the SGW with the latest available software to enable High Octane functionality for vehiclesthat have installed the Direct Connection Stage Kits. For customers that have the Direct Connection Redeye Stage I and Stage II kits installed on their vehicle, this flash is requiredto enable functionality of the High Octane Mode.
Flash: Security Gateway Module (SGW) Updates This bulletin involves reprogramming the SGW with the latest available software to enable High Octane functionality for vehiclesthat have installed the Direct Connection Stage Kits. For customers that have the Direct Connection Redeye Stage I and Stage II kits installed on their vehicle, this flash is requiredto enable functionality of the High Octane Mode.
Flash: Security Gateway Module (SGW) Updates This bulletin involves reprogramming the SGW with the latest available software to enable High Octane functionality for vehiclesthat have installed the Direct Connection Stage Kits. For customers that have the Direct Connection Redeye Stage I and Stage II kits installed on their vehicle, this flash is requiredto enable functionality of the High Octane Mode.
Flash: Security Gateway Module (SGW) Updates This bulletin involves reprogramming the SGW with the latest available software to enable High Octane functionality for vehiclesthat have installed the Direct Connection Stage Kits. For customers that have the Direct Connection Redeye Stage I and Stage II kits installed on their vehicle, this flash is requiredto enable functionality of the High Octane Mode.
Flash: Security Gateway Module (SGW) Updates This bulletin involves reprogramming the SGW with the latest available software to enable High Octane functionality for vehiclesthat have installed the Direct Connection Stage Kits. For customers that have the Direct Connection Redeye Stage I and Stage II kits installed on their vehicle, this flash is requiredto enable functionality of the High Octane Mode.
Flash: Security Gateway Module (SGW) Updates This bulletin involves reprogramming the SGW with the latest available software to enable High Octane functionality for vehiclesthat have installed the Direct Connection Stage Kits. For customers that have the Direct Connection Redeye Stage I and Stage II kits installed on their vehicle, this flash is requiredto enable functionality of the High Octane Mode.
Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. The following software enhancements are available: Engine REV stationary exhaust noise restrictions. Complaint of noticeable low RPM during a hard braking procedure.
Updated Fuel Filler Cap This bulletin involves updating the fuel filler cap with improved version. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P0455 - EVAP System Large Leak. P0456 - EVAP System Small Leak. P04EC - EVAP System Large Leak Detected - Fuel Tank Side. P04EE - EVAP System Very Small Leak Detected - Fuel Tank Side.
Hood Bezel is Warped and Hood Paint is Damaged or Chipped This bulletin involves replacing the hood bezel, inspecting the hood for paint damage and if required, refinishing the entire hood. The customer may describe the following:The hood bezel is warping and in some cases, chipping the paint on the sides and corners of the hood bezel opening. Every vehicle will get a new hood bezel even if the customer chooses to have the repairs done at a third party facility. All vehicles must be inspected and the hood bezel released through the Warranty Contact Center (888-255-2616 / Option #2) with VIN to arrange an appointment.All (U.S. Only) customers will be contacted by a Customer Care Advisor regarding this Service Bulletin. If the customer (U.S. Only) chooses to have their vehicle repaired by a third party preferred paint facility with reimbursement, an inspection with photos of the damaged paint are to be performed by the dealership. These customers must also receive a new hood bezel from the dealership for installation at a third party facility.Perform the Diagnostic Procedure. Proceed toStep1of the Diagnostic Procedure. All (Canadian Only) customer vehicles must be inspected. Hood bezels will only be released through the Tech Hotline Center 1-800-361-2702 (English) or 1-800-361-1702 (French).
SEAT BELT, Front (Right) For concern of front passenger seat belt is slow to retract upon exiting the vehicle, check if seat belt webbing is pinched at trim outlet. Seat belt retractor turning loop installation can be adjusted to help give clearance between webbing and trim.
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. Customers may also experience the following:Vehicle willfail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
Damper - steering
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).