Note: Vehicles equipped with 7.5 litre engines. The fuel return tube, which connects the frame fuel return line with the engine fuel rail, may contact the pinch weld flange connecting the dash panel to the floor pan. This could lead to abrasion of the steel tube and result in a fuel leak. Correction: Fuel return tubes will be replaced with flexible stainless steel braided/teflon lines and a vinyl guard will be installed on the body weld flange.
Transport Canada3 mar 19941994043Anni modello 1990–1991Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The steel fuel return tubes that connect the frame fuel return lines with the engine fuel rail can contact the pinch weld flange connecting the dash panel to the floor pan. Continued contact leads to abrasion of the steel fuel return tube and eventually results in a fuel leak.
NHTSA · Stati Uniti23 feb 199494V040000Anni modello 1990–1991Mostrato in inglese originale · traduzione in attesaVedi dettagli →
A malfunctioning check valve within the fuel pump assembly causes a portion of the unused fuel from one tank to be returned to the second tank. When this occurs, the capacity of the second tank can be exceeded, causing fuel spillage.
NHTSA · Stati Uniti2 ago 199393V125000Anni modello 1990–1991Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicles with gasoline engines and dual fuel tanks may experience the transfer of fuel from one tank to the other through a malfunctioning check valve within the fuel pump assembly. This could cause the capacity of the other tank to be exceeded, resulting in fuel overflow past the filler cap. In the presence of an ignition source, a fire could result. Correction: Fuel pressure regulator will be replaced and redundant check valves will be installed on affected vehicles.
Transport Canada20 lug 19931993102Anni modello 1990–1991Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On vehicles with dual fuel tanks, the dual function fuel reservoir (dfr) may malfunction allowing supply fuel to be drawn from one tank and a portion of the unused fuel to be returned to the other tank. As a result, the other tank could possibly be overfilled, resulting in overflow of fuel past the filler cap. In the presence of an ignition source, the potential for a fire may exist. Correction: A dfr containing "o" rings manufactured from revised material will be installed on affected vehicles.
Transport Canada9 dic 19911991170Anni modello 1989Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The dual fuel tank selector valve may malfunction and cause an overfill condition in one of the fuel tanks, resulting in an overflow of fuel past the filler cap.
NHTSA · Stati Uniti4 set 199191V146000Anni modello 1989Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Note: This recall supersedes recall 88164. Vehicles located in the yukon, nothwest territories, alberta, eastern british columbia, n.W. Ontario, manitoba and saskatchewan. A short, u-shaped nylon fuel tube (jumper tube) located on the left-hand frame rail connecting the fuel pump to the fuel filter could develop pin holes in the tubing wall. If this condition should occur, it would allow fuel to leak and a fire could result. Correction: A steel braided teflon fuel supply line and related components will be installed which will ground the fuel line and eliminate the potential for an electrostatic charge. The u-shaped nylon jumper tube will be eliminated by this replacement fuel system.
Transport Canada2 gen 19901990003Anni modello 1986–1989Mostrato in inglese originale · traduzione in attesaVedi dettagli →
A short, u-shaped nylon fuel tube (jumper tube) located on the left-hand frame rail connecting the fuel pump to the fuel filter could develop pin holes in the tubing wall. If this condition should occur, it would allow fuel to leak and a fire could result. Correction: Fuel tube will be replaced with one having a krayton sleeve.
Transport Canada2 dic 19881988164Anni modello 1986–1989Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On vehicles with EFI or CFI, the spring-lock fuel line coupling used to connect the fuel supply and return lines to the EFI fuel rails or to the CFI throttle bodies, as well as other fuel line connections near the dash panels on some vehicles, could disengage during vehicle use. Should this occur, loss of fuel will result, providing the potential for a vehicle fire. Correction: Coupling retainer clips will be installed on affected vehicles. Note: Escort vehicles are equipped with EFI and CFI. Lynx vehicles are equipped with CFI only. EFI - electronic fuel injection; CFI - central fuel injection
Transport Canada9 set 19871987098Anni modello 1986–1987Tradotto automaticamente · originale: ingleseVedi dettagli →
Trucks fail to meet requirement of fmvss no. 301, fuel system integrity, in a 30 mph front angular barrier test impact because of the omission of the nose shield on midship fuel tank. Consequence of defect: In case of an accident, fuel spillage in the trucks which do not meet the fmvss increases the risk of a fire.
NHTSA · Stati Uniti14 ago 198686V111000Anni modello 1986Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Alcuni dei veicoli interessati potrebbero essere dotati di un cavo del cruise control che può interferire con la puleggia del servocomando del cruise control, impedendo alla farfalla di tornare al minimo quando si disinserisce il cruise control.
The throttle cable which runs from the accelerator to the governor assembly housing may have been kinked during assembly, causing excessive wear of the cable housing inner lining. This could result in either fracture or sticking of the cable.
NHTSA · Stati Uniti1 mag 199191V071000Anni modello 1990–1991Mostrato in inglese originale · traduzione in attesaVedi dettagli →
These vehicles may not comply with c.M.V.S.S. 1103 - exhaust emissions. Vehicles may have fuel tank vapour hose that is too long and may be kinked near the connection to the evaporative emissions canister. Correction: Hoses will be inspected and length reduced if necessary.
Transport Canada25 ott 19901990166Anni modello 1988–1989Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Note: Vehicles equipped with 7.5 litre engines. These vehicles do not comply with c.M.V.S.S. 1103 - exhaust emissions. Incorrect egr valve. Correction: Egr valve will be replaced.
Transport Canada20 giu 19901990093Anni modello 1988–1989Mostrato in inglese originale · traduzione in attesaVedi dettagli →
These vehicles do not comply with c.M.V.S.S. 301 - fuel system integrity. Protective shields are to be installed to protect the fuel reservoirs from contact by the transfer case during left frontal fixed barrier impacts as specified by subsection 5 of the standard.
Transport Canada2 dic 19881988163Anni modello 1989Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Diesel engine goveernor lever assemblies may have been improperly assembled so that one or more of three retaining prongs may not be engaged in the governor lever pivot shafts.
NHTSA · Stati Uniti27 apr 198787V059000Anni modello 1987Mostrato in inglese originale · traduzione in attesaVedi dettagli →
These vehicles do not comply with c.M.V.S.S.1105- evaporative emissions.
Transport Canada3 gen 19861986001Anni modello 1986Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).