La piastra di pressione della frizione può rompersi mentre il veicolo è in movimento. Ciò può causare un malfunzionamento della trasmissione e aumentare il rischio di incendio del motore.
Safety Gate · UE29 nov 2019A12/1883/19Anni modello 2009–2010Tradotto automaticamente · originale: ingleseVedi dettagli →
Localized overheating of the engine cylinder head may cause the cylinder head to crack.This may cause a pressurized oil leak which in extreme circumstances could result in a fire in the engine compartment.
DVSA · Regno Unito8 gen 2018R/2018/008Anni modello 2010Mostrato in inglese originale · traduzione in attesaVedi dettagli →
La corrosione della valvola multipla del sistema a gas naturale può verificarsi. In caso di incendio, ciò potrebbe causare il malfunzionamento del dispositivo di sfiato della pressione, con il rischio che il serbatoio del gas naturale esploda.
Le indagini tecniche hanno stabilito che i veicoli utilizzati in paesi in cui si fa un ampio uso di sale stradale durante i mesi invernali possono presentare un rischio maggiore di accumulo di corrosione. Nei casi estremi, la corrosione può propagarsi ai circuiti elettronici e provocarne il surriscaldamento. In rari casi, il surriscaldamento può essere sufficiente a incendiare il modulo e i cablaggi e i componenti circostanti.
DVSA · Regno Unito9 lug 2014R/2014/063Anni modello 2007Tradotto automaticamente · originale: ingleseVedi dettagli →
In paesi in cui le strade vengono intensamente salate durante l'inverno esiste il rischio che si formi corrosione sul modulo di controllo della ventola di raffreddamento.
null Vehicles operated in countries which have high road salt usage during the winter months may experience an increased risk of corrosion build up. In extreme cases the corrosion can spread into the electronic circuits and result in overheating. In rare cases the module and wiring components may ignite.
Safety Gate · UE4 giu 2014A12/0825/14Anni modello 2007Mostrato in inglese originale · traduzione in attesaVedi dettagli →
null Vehicles operated in countries which have high road salt usage during the winter months may experience an increased risk of corrosion build-up. In extreme cases, the corrosion can propagate into the electronic circuits and result in overheating. In rare cases, the overheating may be sufficient to ignite the module fitted to the engine cooling fan and surrounding wiring component increasing the risk of a fire.
Safety Gate · UE24 ott 2012A12/1619/12Anni modello 2007Mostrato in inglese originale · traduzione in attesaVedi dettagli →
It has been identified that a batch of vehicles converted by SVP have been fitted with a split charging system the relays of which may not be to specification and could subsequently fail. This can result in wiring loom damage and the possibility of a fire.
DVSA · Regno Unito28 apr 2010R/2010/031Anni modello 2007Mostrato in inglese originale · traduzione in attesaVedi dettagli →
It has been identified that due to a specification change to the engine cooling fan module vehicles operated in countries which have high road salt usage during the winter months may experience an increased risk of corrosion build up. In extreme cases the corrosion can penetrate the electrical circuits and result in overheating. In rare cases the overheating may be sufficient to ignite the cooling fan control module and surrounding wiring whilst the vehicle is parked.
DVSA · Regno Unito8 apr 2009R/2009/016Anni modello 2007Mostrato in inglese originale · traduzione in attesaVedi dettagli →
It has been identified that a batch of vehicles may have been fitted with section of power assisted steering hose that is not to specification. This could result in premature failure of the hose with loss of steering assistance and in extreme cases the possibility of an engine bay fire occasioned by escaping hydraulic fluid coming into contact with hot components.
DVSA · Regno Unito29 lug 2008R/2008/113Anni modello 2008Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Certain vehicles fail to conform to the requirements specified in federal motor vehicle safety standard no. 208, 'occupant crash protection.' the driver air bag module may not have been properly assembled.
NHTSA · Stati Uniti21 nov 200707V541000Anni modello 2008Mostrato in inglese originale · traduzione in attesaVedi dettagli →
During engine warm up it is possible that the non return valve within the vacuum pump may stick. It is possible that if sufficient brake applications are made before the valve releases the vacuum stored within the brake booster will be used up and a hard brake pedal and longer stopping distances may result.
DVSA · Regno Unito21 mag 2009R/2009/050Anni modello 2008–2009Mostrato in inglese originale · traduzione in attesaVedi dettagli →
It has been identified that on affected vehicles the roll over protection system securing bolts may either be loose or not fully tight. In this condition the roll over protection may not be fully effective in the event of a roll over occurring.
DVSA · Regno Unito7 dic 2007R/2007/169Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).