La piastra di pressione della frizione può rompersi mentre il veicolo è in movimento. Ciò può causare un malfunzionamento della trasmissione e aumentare il rischio di incendio del motore.
Safety Gate · UE29 nov 2019A12/1883/19Anni modello 2009–2013Tradotto automaticamente · originale: ingleseVedi dettagli →
Affected vehicles fitted with a 1.0 1.5 or 1.6 Ecoboost engine and 6-speed manual transmission could suffer clutch pressure plate fracture. This results in clutch smell reduced vehicle speed and performance. In the unlikely event of clutch pressure plate fracture a noise (thud / bang) could be heard from the vicinity of the transmission in extreme cases resulting in clutch / transmission fragments being released and striking under hood components creating a risk of smoke and fire from the under hood area.
DVSA · Regno Unito16 lug 2018R/2018/082Anni modello 2013Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Localized overheating of the engine cylinder head may cause the cylinder head to crack.This may cause a pressurized oil leak which in extreme circumstances could result in a fire in the engine compartment.
DVSA · Regno Unito8 gen 2018R/2018/008Anni modello 2010–2013Mostrato in inglese originale · traduzione in attesaVedi dettagli →
In the event of a colision which deploys the front seat belt retractor pre-tensioner there is a possibility that the insulation material on the inner face of lower 'B' pillar trim could be subjected to a concentrated heat source that could ignite the insulation material resulting in fire.
DVSA · Regno Unito30 ago 2017R/2017/238Anni modello 2012–2013Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Het isolatiemateriaal aan de binnenzijde van de bekleding onderaan de 'B'-stijl wordt bij een botsing als de gordelspanner wordt geactiveerd blootgesteldaan een geconcentreerde hittebron.
rdw29 ago 2017MGP170448Anni modello 2013Mostrato in olandese originale · traduzione in attesaVedi dettagli →
null In the event of a vehicle impact which deploys the front seat belt pre-tensioner, insulation material in the internal door pillar trim could ignite during the activation of the gas generator and the winding up of the seat belt.
Safety Gate · UE23 ago 2017A12/1161/17Anni modello 2012–2013Mostrato in inglese originale · traduzione in attesaVedi dettagli →
null The heated washer jets fitted to some vehicles may have elements which are not correctly sealed. The poor sealing could lead to corrosion due to water ingress and subsequent overheating of the jets which could lead to a fire.
Safety Gate · UE29 giu 2017A12/0889/17Anni modello 2010Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The heated washer jets fitted to some Kuga vehicles may have jet heating elements that are not correctly sealed. There is a possibility that poor sealing could lead to corrosion due to water ingress and subsequent overheating of the jets. An overheating jet element will damage the nozzle housing and may cause local heat/fire damage to the cowl grille accompanied by smoke and burning smell.
DVSA · Regno Unito5 giu 2017R/2017/107Anni modello 2010Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The heated washer jets may have jet heating elements which are not correctly sealed. There is a possibility that poor sealing could lead to corrosion due to water ingress and subsequent overheating of the jets. An overheating jet element will damage the nozzle housing and may cause local heat/fire damage to the cowl grille accompanied by smoke and burning smell.
DVSA · Regno Unito18 nov 2016R/2016/067Anni modello 2008–2010Mostrato in inglese originale · traduzione in attesaVedi dettagli →
null The heated washer jets may have jet heating elements which are not correctly sealed. There is a possibility that poor sealing could lead to corrosion due to water ingress and subsequent overheating of the jets which could lead to a fire.
Safety Gate · UE15 apr 2016A12/0487/16Anni modello 2008–2010Mostrato in inglese originale · traduzione in attesaVedi dettagli →
During engine warm up it is possible that the non return valve within the vacuum pump may stick. It is possible that if sufficient brake applications are made before the valve releases the vacuum stored within the brake booster will be used up and a hard brake pedal and longer stopping distances may result.
DVSA · Regno Unito21 mag 2009R/2009/050Anni modello 2008–2009Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).