Vehicle description: Passenger cars. The seat belt buckle tongue may not fully eject from the buckle assembly when the release button is pushed slowly. This condition could also result in a partial latch of the tongue in the buckle.
NHTSA · Stati Uniti27 apr 200101V144000Anni modello 2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Sui veicoli dotati di airbag supplementare lato guidatore, i filetti del perno centrale del modulo airbag potrebbero essere stati danneggiati durante l'assemblaggio. In caso di collisione di livello tale da causare il dispiegamento, l'alloggiamento del perno centrale potrebbe separarsi dall'adattatore dell'airbag, impedendo all'airbag di gonfiarsi correttamente. Inoltre, i gas di combustione caldi fluirebbero direttamente attraverso l'airbag anziché attraverso i normali dispositivi di filtraggio e raffreddamento, con la possibilità di lesioni da ustione per gli occupanti del veicolo. Correzione: i moduli airbag saranno ispezionati e sostituiti se necessario.
Transport Canada21 nov 19901990182Anni modello 1990Tradotto automaticamente · originale: ingleseVedi dettagli →
Ford Motor Company (Ford) is recalling certain model year 2009-2012 Ford Flex, 2008 and 2010-2012 Ford Taurus, 2008-2009 Ford Taurus X, 2008 Mercury Sable, 2009 and 2011 Lincoln MKS vehicles. The driver frontal air bag may improperly inflate during second-stage deployment in the event of a high speed crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
NHTSA · Stati Uniti26 apr 201616V247000Anni modello 2008–2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Certain sport utility vehicles, pickup trucks, and passenger vehicles fail to comply with the requirements of fmvss 225, "child restraint anchorage systems." the affected expedition/navigator owner guides do not identify the locations of seating positions equipped with tether anchorages, and do not provide instructions for securing child seats to these tether anchorages. The f150 sc owner guides do not provide the procedure for securing child seats to the tether anchorages. The taurus/sable owner guides do not identify the center rear seating position as having latch compatible lower anchorages.
NHTSA · Stati Uniti28 nov 200000V396000Anni modello 2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Passenger vehicles. The child safety seat anchor latch (iso-fix anchor) fasteners do not have adequate residual torque. The anchors are secured to the floor pan with a reinforcement plate that has two studs that extend upward through the floor pan and the iso-fix anchor. The sealer on the floor pan could cause a soft joint and, even if the nuts are properly torqued, road vibrations could cause the nut to work its way completely off the stud.
NHTSA · Stati Uniti24 ago 200000V240000Anni modello 2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Descrizione del veicolo: veicoli passeggeri. L'avvolgitore della cintura di sicurezza potrebbe presentare un perno nel meccanismo commutabile ELR/ALR realizzato in modo non corretto. In alcune circostanze, il meccanismo di commutazione potrebbe diventare non funzionante, impedendo l'estrazione del nastro della cintura di sicurezza dall'avvolgitore. È inoltre possibile che un malfunzionamento del meccanismo impedisca di commutare la cintura in modalità ALR. Il meccanismo ELR non è interessato da questa condizione.
NHTSA · Stati Uniti20 set 199999V250000Anni modello 1999Tradotto automaticamente · originale: ingleseVedi dettagli →
These vehicles may have a front seat belt buckle attaching stud that may have been improperly heat treated. This heat treating may have resulted in cracks developing in the stud. If the stud is cracked, there is the potential for less than the intended level of occupant restraint in the event of a vehicle crash. Correction: Seat belt buckle mounting bracket and stud assembly will be replaced on affected vehicles.
Transport Canada28 ago 19981998173Anni modello 1998–1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Passenger vehicles equipped with manual seat tracks. The front seat belt buckle attaching stud may have been improperly heat treated. This heat treatment may have resulted in cracks developing in the stud.
NHTSA · Stati Uniti25 ago 199898V198000Anni modello 1998–1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Seat belt buckles on these vehicles may experience conditions whereby the buckle may not unlatch when the release button is depressed or may not latch, or in some cases, may latch partially but not sufficiently to provide occupant restraint in the event of a collision. Note: Only end-release buckles on "rigid" mountings are susceptible to this malfunction. Correction: Factory installed end-release seat belt buckles will be replaced with redesigned buckles.
Transport Canada29 set 19921992120Anni modello 1989–1990Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The rigid mounted safety belt buckles are defective in three ways. First, a fastened safety belt buckle will not unlatch when the release button is depressed. This results from interference between the buckle ejector finger and the buckle tongue window. The second defect is the safety belt buckle may not latch. The third possible defect is that the tongue may be retained by the buckle, but it may not be latched sufficiently to provide occupant protection.
NHTSA · Stati Uniti17 ago 199292V113000Anni modello 1989–1990Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The power seat switch wiring is routed over rather than under the front seat support brace, allowing damage by seat cushion spring ends when seat is occupied.
NHTSA · Stati Uniti4 mar 199191V036000Anni modello 1988–1989Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The right quarter windows may contain glass which was improperly tempered. This glass may yield pieces larger than the maximum allowed by fmvss 205, glazing material. Consequence of defect: In case of an accident these large pieces of glass may seriously injure the occupants of the car.
NHTSA · Stati Uniti10 mar 198686V039000Anni modello 1986Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Certain vehicles do not comply with CMVSSS. 208 - seat belt installations. The french language version of the air bag maintenance/information/instruction label was not installed. Note: for taurus models only police and sho vehicles are affected. Correction: French language labels will be mailed to affected owners.
Transport Canada29 set 19921992123Anni modello 1992Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).