Lettura libera · account gratuito per contribuireErede di Anticars (2000)

GMCGMC Envoy

1998–2009 · 2 generazioni · 27 difetti documentati · 1 mercati
Generazioni

I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.

Anno modello
MercatoTuttiNA
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

Questa comunicazione di Informazioni Preliminari fornisce al tecnico informazioni sui veicoli che presentano un problema intermittente di assenza di avviamento (no crank), mancato avviamento (no start) o arresto durante l'avviamento (start stall), con la spia di sicurezza accesa. Il tecnico potrebbe rilevare i codici di guasto diagnostico B3055, B3

NHTSA · bollettino del costruttore11039894Anni modello 2007Tradotto automaticamente · originale: ingleseVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, B3935, C0750, C0755, C0760, C0765, and/or C0775. Traduzione: Questa comunicazione di Informazioni Preliminari fornisce al tecnico informazioni sui veicoli che presentano un problema intermittente di assenza di avviamento, mancata accensione o arresto del motore durante l'avviamento, con l'accensione della spia di sicurezza. Il tecnico potrebbe rilevare i Codici di Guasto Diagnostici B3055, B3060, B3935, C0750, C0755, C0760, C0765 e/o C0775.

NHTSA · bollettino del costruttore11021792Anni modello 2007Tradotto automaticamente · originale: ingleseVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.

NHTSA · bollettino del costruttore10232136Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.

NHTSA · bollettino del costruttore10219266Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.

NHTSA · bollettino del costruttore10200151Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.

NHTSA · bollettino del costruttore10114954Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon an upper engine and valve cleaning should be performed.

NHTSA · bollettino del costruttore10114746Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This Preliminary Information communication provides information to the technician that some vehicles may have a Service Engine Soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 Pounds per Square Inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management Valve Lifter Oil Manifold Diagnosis and Testing in Service Information. If it isolates a concern with the Valve Lifter Oil Manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 Full Size Truck/SUV or a 2007-2009 Chevrolet Tahoe with the Police Package reprogram the Engine Control Module. On the 2008-2009 Pontiac G8, 2010-2011 Camaro, and 2007-2010 Full Size Trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the LS4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · bollettino del costruttore10114354Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

10054E - Special Coverage (customer co-pay discontinued). The contacts on the fuel level sensor may wear prematurely. This wear could cause the fuel gauge to read empty after filling the tank and cause the malfunction indicator light (MIL) to illuminate. As the fuel level in the tank drops, the MIL may turn off and the gauge may display a reading; however, the reading may indicate a slightly higher level of fuel than what is in the tank. Eventually, as the contacts continue to wear, the fuel gauge will stop working and the MIL will illuminate continuously. If the condition occurs within the stated terms, dealers will install a new design fuel level sensor.

NHTSA · bollettino del costruttore10114183Anni modello 2005–2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon, an upper engine and valve cleaning should be performed. Update added part numbers for the cleaner and model years.

NHTSA · bollettino del costruttore10113418Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.

NHTSA · bollettino del costruttore10113177Anni modello 2004Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This Preliminary Information communication provides information to the technician that some vehicles may have a Service Engine Soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 Pounds per Square Inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management Valve Lifter Oil Manifold Diagnosis and Testing in Service Information. If it isolates a concern with the Valve Lifter Oil Manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 Full Size Truck/SUV or a 2007-2009 Chevrolet Tahoe with the Police Package reprogram the Engine Control Module. On the 2008-2009 Pontiac G8, 2010-2011 Camaro, and 2007-2010 Full Size Trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the LS4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · bollettino del costruttore10113120Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.

NHTSA · bollettino del costruttore10112697Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This Preliminary Information communication provides information to the technician that some vehicles may have a Service Engine Soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 Pounds per Square Inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management Valve Lifter Oil Manifold Diagnosis and Testing in Service Information. If it isolates a concern with the Valve Lifter Oil Manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 Full Size Truck/SUV or a 2007-2009 Chevrolet Tahoe with the Police Package reprogram the Engine Control Module. On the 2008-2009 Pontiac G8, 2010-2011 Camaro, and 2007-2010 Full Size Trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the LS4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · bollettino del costruttore10112436Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.

NHTSA · bollettino del costruttore10111927Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.

NHTSA · bollettino del costruttore10111737Anni modello 2004Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

Diagnostic information on engine oil leak from rear of crankshaft. *tt 05-06-01*022 supplement - crankshaft oil leak repair instrumentions. *tt

NHTSA · bollettino del costruttore10017385Anni modello 2005Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

Service engine soon light due a diagnostic trouble code p0606 diagnostic trouble code, operate in reduced engine power mode, and potentially stall. *tt

NHTSA · bollettino del costruttore10017230Anni modello 2004Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoModeratoElettronicaNA

Bollettino

Concerns with no start, turn/hazard, interior lamps, driver information center (dic), radio, theft alarm, wipers, cruise, shift interlock, horn and/or key in signal inoperative. *tt

NHTSA · bollettino del costruttore628833Anni modello 2002Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoLieveElettronicaNA

Bollettino

Questo bollettino di assistenza fornisce informazioni su alcuni veicoli che possono oscillare o muoversi leggermente in avanti o all'indietro mentre sono in posizione P (Park) all'avviamento dopo un lungo periodo di raffreddamento (cold soak). Questa condizione può essere accompagnata da un rumore di colpo secco (clunk). Si tratta di un movimento lieve, più spesso visibile dall'esterno che percepibile all'interno del veicolo, e si manifesta utilizzando la funzione di avviamento automatico, se presente.

NHTSA · bollettino del costruttore11009088Anni modello 2007Tradotto automaticamente · originale: ingleseVedi dettagli →
Envoy II · 2002–2009
BollettinoLieveElettronicaNA

Bollettino

Vehicle Wide Programming (VWP) è un nuovo processo per l'aggiornamento del software sui veicoli GM. Attraverso una singola selezione all'interno di Techline Connect, consente prima di identificare quali moduli necessitano di aggiornamento e poi di procedere all'aggiornamento dei moduli interessati (con alcune eccezioni). L'aggiornamento dei moduli viene completato in parallelo, invece di richiedere al tecnico di aggiornare un modulo alla volta. Ciò permette un approccio più snello per concessionari e clienti.

NHTSA · bollettino del costruttore11006621Anni modello 2006Tradotto automaticamente · originale: ingleseVedi dettagli →
Envoy II · 2002–2009
BollettinoLieveElettronicaNA

Bollettino

Questo bollettino fornisce informazioni per le riparazioni delle masse elettriche utilizzando i nuovi elementi di fissaggio di ricambio General Motors con finitura conduttiva.

NHTSA · bollettino del costruttore10252735Anni modello 2006Tradotto automaticamente · originale: ingleseVedi dettagli →
Envoy II · 2002–2009
BollettinoLieveElettronicaNA

Bollettino

This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.

NHTSA · bollettino del costruttore10249011Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoLieveElettronicaNA

Bollettino

Programming And Activation Of Replacement OnStar Modules.

NHTSA · bollettino del costruttore10246951Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Envoy II · 2002–2009
BollettinoLieveElettronicaNA

Bollettino

This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.

NHTSA · bollettino del costruttore10237387Anni modello 2007Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Meno recenti →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).