Bollettino
Battery warning light on IPC / flat battery at point of customer handover.
🔔 Crea un account gratuito per ricevere avvisi via e-mail su Jaguar F-Type
I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.
Battery warning light on IPC / flat battery at point of customer handover.
Pivi Pro navigation map data fails to install from USB device to vehicle
Pivi Pro navigation map data fails to install from USB device to vehicle
A potential issue has been identified on certain Jaguar vehicles within the listed Affected Vehicle Range where the brake booster vacuum pipe may be routed incorrectly.
An oil leak from underneath the vehicle may be evident. Upon further inspection, the leak may be found to be from the transmission.
An issue has been identified on a limited number of Jaguar vehicles within the listed Affected Vehicle Range where the evaporative leak monitor function within the Powertrain Control Module (PCM) contains a software error
A potential issue has been identified on certain Jaguar vehicles within the listed Affected Vehicle Range where the evaporative leak monitor function within the Powertrain Control Module (PCM) contains a software error.
An issue has been identified on a limited number of Jaguar vehicles within the listed Affected Vehicle Range where the evaporative leak monitor function within the Powertrain Control Module (PCM) contains a software error
Potential issues have been identified on a limited number of Jaguar vehicles within the listed Affected Vehicle Range. The list of issues include the following: HMI stuck in installation for the entire drive cycle and there is no 'check for update' button shown within settings Comfort controller option is not available in the connectivity screen Installation failed pop-up should be removed for NGISOTA Voice command feature is unavailable in Mandarin, but other languages such as English, Cantonese, or Sichuanese are OK No response from HMI when 'check for update' is pressed and there is no connectivity HMI stuck in touchscreen throughout the cycle after abortive start-up NGI and TCU SOTA enable/disable option
Potential issues have been identified on a limited number of Jaguar vehicles within the listed Affected Vehicle Range. The list of issues include the following: HMI stuck in installation for the entire drive cycle and there is no 'check for update' button shown within settings Comfort controller option is not available in the connectivity screen Installation failed pop-up should be removed for NGISOTA Voice command feature is unavailable in Mandarin, but other languages such as English, Cantonese, or Sichuanese are OK No response from HMI when 'check for update' is pressed and there is no connectivity HMI stuck in touchscreen throughout the cycle after abortive start-up NGI and TCU SOTA enable/disable option
Issue: The Anti-Lock Brake System (ABS) module software is no longer present within the module after an attempt to update the software with Pathfinder
Issue: Injector Refit Kit (Service Part number: T2H33724) is shipped with BOSCH installation instruction sheet. Installation instructions are incorrect on the BOSCH installation sheet.
A customer may complain of a coolant leak from the vehicle.
Situation: When installing the removable rear quarter window to the vehicle, it may be difficult to operate the locking lever.
Situation: On manual transmission-equipped vehicles only, the engine may stall during a transmission downshift, occurring when the driver of the vehicle does not allow the clutch to fully retract during downshifting.
Situazione: È stato individuato un problema su un numero limitato di veicoli F-Type (X152) di modello 2016, nei quali i dadi di bloccaggio della barra di regolazione del tirante dello sterzo della cremagliera risultano serrati con una specifica di coppia errata. Azione: I concessionari sono tenuti a trattenere esclusivamente i veicoli nuovi interessati che si trovano sotto il loro controllo e ad astenersi dal consegnarli per la vendita come veicoli nuovi, in attesa del completamento dell'intervento di assistenza descritto in questo bollettino tecnico.
Steering rack tie rod adjustment bar locking nuts are to incorrect torque
"issue: A steering wheel shimmy may be evident during the pre-delivery inspection (pdi) road test due to temporary flat spots on the rolling surface of the tire. Cause: Temporary flat spots naturally develop on the rolling surface of a tire when the wheels of the vehicle are stationary over a period of time."
"situation: A potential issue has been identified on a limited number of 2015 model year f-type (x152) vehicles (coupe only) where the noise, vibration, and harshness (nvh) pad, installed to the underside of the parcel shelf, may become separated. Action: Retailers are required to hold only affected vehicles that are within your control and refrain from releasing the vehicles for new or used vehicle sale pending completion of the rework action detailed in this technical bulletin"
An issue has been identified on a limited number of 2015 model year xj (x351) where a noise and vibration from the front of the vehicle when turning the steering wheel at low speed."
"situation: On vehicles fitted with the carbon ceramic brake system, the yellow paint of the front brake calipers may be subject to discoloration at extremely high temperatures caused through closed road usage. Action: Should a customer express concern, follow the service instruction outlined below."
"issue:- customers have reported that the airbag warning light has illuminated in the instrument cluster after a previous repair. Cause:- the drivers airbag circuit has been incorrectly diagnosed as being at fault or has more than one fault present."
"situation: The fluid level in the engine coolant system expansion tank may fall below the minimum level over a period of time or a low coolant level message is displayed in the message center. Upon inspection, a leak may be found to be from the front of the engine-driven coolant pump, together with excessive wear of the coolant pump bearing."
"situation: A steering wheel shimmy may be evident during the pre-delivery inspection (pdi) road test due to temporary flat spots on the rolling surface of the tire. Cause: Temporary flat spots naturally develop on the rolling surface of a tire when the wheels of the vehicle are stationary over a period of time."
Situation: The fluid level in the engine coolant system expansion tank may fall below the minimum level over a period of time or a low coolant level message is displayed in the message center. Upon inspection, a leak may be found to be from the front of the engine-driven coolant pump, together with excessive wear of the coolant pump bearing.
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).