Questo fascicolo raccoglie i difetti noti della Jeep Liberty, scritti e documentati dalla comunità. La lettura è libera; un account gratuito permette di contribuire. Un difetto ottiene il sigillo quando abbastanza contributori affidabili lo hanno convalidato.
I proprietari segnalano spesso problemi di suspension su quest'auto (1673 reclami), ma nessuno ne ha ancora spiegato la causa. La conosci?Scrivi la scheda
I proprietari segnalano spesso problemi di airbags su quest'auto (1044 reclami), ma nessuno ne ha ancora spiegato la causa. La conosci?Scrivi la scheda
1,673 owners in the United States reported problems with the suspension of this car to NHTSA (model years 2001–2006), typically at around 61,000 miles. Most often named: front:control arm:lower ball joint (55%). Reported consequences: 117 crashes, 5 fires, 105 injuries, 6 deaths.
✓ Analisi Mecafile di dati ufficiali2001–2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
1,044 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2001–2005), typically at around 111,000 miles. Reported consequences: 250 crashes, 6 fires, 341 injuries, 10 deaths.
✓ Analisi Mecafile di dati ufficiali2001–2005Mostrato in inglese originale · traduzione in attesaVedi dettagli →
352 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2001–2006), typically at around 86,000 miles. Reported consequences: 6 crashes, 32 fires, 7 injuries, 1 death.
✓ Analisi Mecafile di dati ufficiali2001–2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The rear lower control arms may experience excessive corrosion eventually resulting in a fracture A fractured rear control arm could cause reduced vehicle control and can cause a vehicle crash without prior warning
DVSA · Regno Unito24 ago 2018R/2018/202Anni modello 2003–2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
NHTSA · bollettino del costruttore10220840Anni modello 2005Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0).