Brakes: problems reported by owners
100 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2018–2025), typically at around 3,000 miles. Reported consequences: 27 crashes, 15 injuries.
🔔 Crea un account gratuito per ricevere avvisi via e-mail su Mazda CX-5 II
Questo fascicolo raccoglie i difetti noti della Mazda CX-5 II, scritti e documentati dalla comunità. La lettura è libera; un account gratuito permette di contribuire. Un difetto ottiene il sigillo quando abbastanza contributori affidabili lo hanno convalidato.
100 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2018–2025), typically at around 3,000 miles. Reported consequences: 27 crashes, 15 injuries.
75 owners in the United States reported problems with the automatic emergency braking of this car to NHTSA (model years 2018–2025), typically at around 114,000 miles. Most often named: automatic emergency braking (71%), warnings (39%), adaptive cruise control (20%). Reported consequences: 13 crashes, 8 injuries.
56 owners in the United States reported problems with the accelerator and cruise control of this car to NHTSA (model years 2018–2025), typically at around 7,000 miles. Reported consequences: 18 crashes, 8 injuries.
Le cx-5 diesel dispose d’un système de réduction catalytique sélective (scr). il y a un harnais scr/awd qui a un routage unique autour du couvercle de réservoir scr. au fil du temps, la contamination (c’est-à-dire le sable, la saleté) du faisceau scr/awd peut entraîner une usure du câblage et de l’isolation du faisceau en raison des vibrations du couvercle du réservoir scr. dans le pire des cas, les circuits électriques du faisceau de câblage peuvent être déconnectés avec le mil/scr/4wd, ce qui signifie que les voyants d’avertissement ne fonctionnent pas correctement.
La turbine de la pompe à carburant basse pression peut se déformer et provoquer une défaillance du pompage du carburant. cela peut entraîner l’absence de démarrage et/ou de décrochage du moteur, ce qui augmente le risque d’accident.
Catalytic Reduction (SCR) system wiring may become damaged by contamination
NOTE: This service information only applies to vehicles with PYUKD engine and EGR. DESCRIPTION DTC P0402 EGR malfunctions may be falsely detected due to an internal malfunction of the MAP sensor. REPAIR PROCEDURE 1. Using MDARS, verify DTC P0402 is set in current or past history.
This Service Alert supersedes the previously issued Service Alerts listed below: The changes are noted in Red. Infotainment Reboot With Navigation Card Installed This Service Information is no longer valid. Refer to the following updated Technical Service Bulletins: CX-5 / CX-9: 16-002/23 - UPDATED SOFTWARE RELEASE FOR CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM (7TH GEN TYPE) Mazda3 / CX-30 (Non-Turbo): 16-008/23 - UPDATED SOFTWARE RELEASE FOR CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM Mazda3 / CX-30 (Turbo): 16-007/23 - UPDATED SOFTWARE RELEASE FOR CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM
This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 09-012/21 12/13/21, 06/10/21 and 04/27/21 DESCRIPTION Some customers may experience all of following symptoms: The door lock/unlock operation will not work using the remote transmitter button. 1. The door lock/unlock operation will not work using the door lock/release touch sensor. 2. The engine will not start using the ignition switch. 3. The transmitter operates by itself. 4. The key battery drains faster than usual. 5. Symptoms 1-3: This may be caused when excess load is applied to the remote transmitter, deforming the electrical terminals and creating poor contact with the battery. To eliminate this concern, the structure in the remote transmitter has been modified to reduce the deformation of the electrical terminals. Symptom 4-5: This may be caused when excessive load is applied to the remote transmitter, creating a gap around the gasket where moisture enters and corrodes the circuit board which in turn drains the key battery faster than usual. To eliminate this concern, the thickness of the case wall on the gasket mounting surface has been increased and the bonding strength of the components has been improved to prevent deformation. REPAIR PROCEDURE If the battery is bad or installed incorrectly, replace the battery and/or install it correctly. If the remote power saving function is off and the battery is good and installed correctly, replace the defective remote transmitter with a modified one according to the instructions on MGSS (IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING). NOTE: DO NOT replace other remote transmitter(s) for the vehicle if they not experiencing an issue.
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0).