Lettura libera · account gratuito per contribuireErede di Anticars (2000)

Mazda CX-3

2014– · 1 generazioni · 13 difetti documentati · 3 mercati
Generazioni
Tutte le generazioniCX-32014–1330207

I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.

Anno modello
MercatoTuttiNA
BollettinoModeratoMotoreNA

Bollettino

If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely.Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the new engine assembly is installed, debris in the intake manifold will be ingested into the new engine and cause internal damage.Clean the intake manifold internally to remove any debris from old engine before installing the new replacement engine assembly.If the intake manifold cannot be properly cleaned internally, replace it.

NHTSA · bollettino del costruttore10092724Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoModeratoMotoreNA

Bollettino

If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely.Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the new engine assembly is installed, debris in the intake manifold will be ingested into the new engine and cause internal damage.Clean the intake manifold internally to remove any debris from old engine before installing the new replacement engine assembly.If the intake manifold cannot be properly cleaned internally, replace it

NHTSA · bollettino del costruttore10085289Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · bollettino del costruttore11020037Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · bollettino del costruttore10254186Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · bollettino del costruttore10235702Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

Engine Oil seepage from engine oil pressure switch

NHTSA · bollettino del costruttore10213378Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · bollettino del costruttore10210884Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

Some customer using Flexible setting for Oil Change in the maintenance monitor may notice that the oil change due notification will not work due to improper control logic of the PCM. The PCM clears the TRAVELED DISTANCE at the wrong time while the ELAPSED DAYS and the DETERIORATION DETERMINATION work as designed. To correct this issue, the control logic of the PCM has been changed.

NHTSA · bollettino del costruttore10159194Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

Some customer using "Flexible" setting for Oil Change in the maintenance monitor may notice that the oil change due notification will not work due to improper control logic of the PCM. The PCM clears the TRAVELED DISTANCE at the wrong time while the ELAPSED DAYS and the DETERIORATION DETERMINATION work as designed. To correct this issue, the control logic of the PCM has been changed.

NHTSA · bollettino del costruttore10154448Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

Some customers may complain about the Panic Alarm system activating while driving with the following results: The alarm stops when cycling the ignition OFF and then back ON. No DTCs are stored. Contact Hotline for the latest repair information.

NHTSA · bollettino del costruttore10145256Anni modello 2019Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

Frequent engine starts under extremely cold ambient temperatures may result in oil seepage from the engine oil pressure switch. This concern may be caused by a lack of durability of the oil pressure switch under these conditions. To correct the problem, the oil pressure switch has been improved to increase the durability in cold ambient temperatures.

NHTSA · bollettino del costruttore10105644Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

Frequent engine starts under extremely cold ambient temperatures may result in oil seepage from the engine oil pressure switch. This concern may be caused by a lack of durability of the oil pressure switch under these conditions. To correct the problem, the oil pressure switch has been improved to increase the durability in cold ambient temperatures. All skyactiv engines equipped with oil pressure switch part number pe01-18-501a are applicable to this issue.

NHTSA · bollettino del costruttore10099420Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

Some vehicles may exhibit oil seepage from the rear shock absorber(s) while the vehicle is on a hoist (i.E. During normal maintenance or other service). Check the label on both rear shock absorbers for the lot number (example: Ra5 is the lot number shown in the illustration below). If the lot numbers are within the production range shown in the table below, replace the rear shock absorbers with new ones.

NHTSA · bollettino del costruttore10092561Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

The 2016 cx-9 with the skyactiv-g 2.5t engine requires a unique oil filter (py8w-14-302) which is not interchangeable with other skyactiv oil filters. The unique oil filter can be identified with two white bands as shown below.

NHTSA · bollettino del costruttore10092237Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
BollettinoLieveMotoreNA

Bollettino

Mazda connect shuts down and does not reboot. Some vehicles may experience mazda connect infotainment system shutting down with a few minutes after ignition is turned on, and will not reboot. It will only reboot after ignition is turned off and then turned on again. This is caused by an internal malfunction of the connectivity master unit (cmu) hardware.

NHTSA · bollettino del costruttore10076688Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).