I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.
Questo bollettino sostituisce il/i bollettino/i emesso/i in precedenza elencato/i di seguito. Le modifiche sono indicate in rosso.
01-007/24 06/20/24 SPIA DEL LIVELLO OLIO MOTORE ACCESA CON DTC P250F:00 A CAUSA DI BASSO LIVELLO DELL'OLIO MOTORE (AGGIORNATO CON LE INFORMAZIONI SSPD5).
Tutti i Concessionari Mazda: seguire il Programma Speciale di Assistenza SSPD5 Valve Stem Seal Class Action per stabilire se le guarnizioni dello stelo valvola devono essere sostituite.
1. Verificare il problema segnalato dal cliente seguendo la procedura di riparazione del Programma Speciale di Assistenza SSPD5. Come indicato nella procedura di riparazione SSPD5, confermare che l'olio motore non stia perdendo dal motore. Se il cliente segnala che l'olio motore è basso al momento dell'arrivo presso il concessionario, sostituire le guarnizioni dello stelo valvola seguendo il diagramma di flusso per SSPD5. Se l'olio motore risulta basso all'arrivo senza alcun reclamo del cliente, verificare la presenza di SSPD5 e, se le guarnizioni dello stelo valvola non sono state sostituite in base a una precedente Garanzia, sostituire le guarnizioni. Se le guarnizioni dello stelo valvola sono già state sostituite nell'ambito di una precedente richiesta di Garanzia, contattare la Hotline per ulteriori istruzioni. Se è necessario sostituire le guarnizioni dello stelo valvola, sostituire le guarnizioni del lato di scarico con quelle migliorate, utilizzando gli strumenti speciali indicati nelle procedure di riparazione di seguito.
2. Rabboccare l'olio motore (se necessario). NOTA: l'olio motore non deve essere rabboccato senza la sostituzione delle guarnizioni dello stelo valvola.
3. Verificare la riparazione. NOTA: se non si è sicuri dei passaggi da seguire durante la visita di un cliente per consumo di olio correlato a SSPD5, compilare Dealer Recall Help su OneMazda.
NHTSA · bollettino del costruttore11029240Anni modello 2021Tradotto automaticamente · originale: ingleseVedi dettagli →
Some vehicles may experience an airbag system warning light flashing with DTC B1126:1B or B1127:1B. DTC B1126:1B - Driver-side side air bag module circuit resistance high. DTC B1127:1B - Passenger-side side air bag module circuit resistance high. This may be caused by coating on the terminals allowing oxidation. The new terminals have a tin coating to prevent oxidation.
NHTSA · bollettino del costruttore11019093Anni modello 2009Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Please be advised that the valve stem seals assigned to the 2.5 Skyactiv Turbo engines in GEPC are incorrect. The Diesel Valve Stem seal SH09-10-1F5A, which is for Diesel engines, is currently listed for these models in GEPC. Please ensure that the proper valve stem seals are used for the 2.5 Skyactiv Turbo engines affected by SSPD5 have the correct valve seal part number PY8W-10-1F5 installed on PYT engines to avoid any potential issues.
NHTSA · bollettino del costruttore11000679Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
MNAO has recently found an increase in non-returned cores within the United Radio (UR) exchange program. As a reminder, dealers have 90 days, after the order is placed, to return the exchanged part. Failure to return the exchanged part will result in a debit of the full component price. It is highly recommended to set a calendar reminder at the time of the order for no more than 60 days to ensure all orders are returned if repaired and if not repaired, contact the customer to cancel the order and return the unit.
NHTSA · bollettino del costruttore10243559Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some vehicles may exhibit a steering shimmy or body vibration during the PDI test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be caused by improper maintenance during dealer storage (e.g.: Vehicle was left stationary for a prolonged period of time in high ambient temperatures).
NHTSA · bollettino del costruttore10238680Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some vehicles may exhibit a steering shimmy or body vibration during the PDI test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be caused by improper maintenance during dealer storage (e.g.: Vehicle was left stationary for a prolonged period of time in high ambient temperatures).
NHTSA · bollettino del costruttore10232302Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some vehicles may have a "LOW ENGINE OIL LEVEL" warning message and an engine oil level warning light on in the instrument cluster with DTC P250F:00 stored in memory, and the oil level has actually decreased to near low. - DTC P250F:00 - Engine oil level signal: engine oil level low This is caused by an oil consumption increase due to damage of the valve seals on the exhaust side. To eliminate this concern, the design of these valve seals has been modified.
NHTSA · bollettino del costruttore10230891Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some vehicles may exhibit a steering shimmy or body vibration during the PDI test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be caused by improper maintenance during dealer storage (e.g.: Vehicle was left stationary for a prolonged period of time in high ambient temperatures).
NHTSA · bollettino del costruttore10213147Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some vehicles may have a LOW ENGINE OIL LEVEL warning message and a CHECK ENGINE light illuminated in the instrument cluster, along with DTC P250F:00 stored in memory. DTC P250F:00 - Engine oil level signal: engine oil level low. Upon inspecting the engine oil level, the level is found to be low and there doesnt appear to be any trace of oil leakage in the engine compartment. This concern usually occurs when the mileage reaches approximately 3,100 4,700 miles (5,000 - 7,500km) and may also occur again after replacing or topping off the engine oil. The root cause of this concern has not been identified yet, therefore a repair procedure will be announced at a later date. Since this issue has been reported after a valve stem seal modification, it is very likely that valve stem seal damage is causing oil to leak into the combustion chamber.
NHTSA · bollettino del costruttore10203724Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some vehicles may have a LOW ENGINE OIL LEVEL warning message and a CHECK ENGINE light illuminated in the instrument cluster, along with DTC P250F:00 stored in memory. DTC P250F:00 - Engine oil level signal: engine oil level low. Upon inspecting the engine oil level, the level is found to be low and there doesn't appear to be any trace of oil leakage in the engine compartment. This concern usually occurs when the mileage reaches approximately 3,100 - 4,700 miles (5,000 - 7,500km) and may also occur again after replacing or topping off the engine oil. The root cause of this concern has not been identified yet, therefore a repair procedure will be announced at a later date. Since this issue has been reported after a valve stem seal modification, it is very likely that valve stem seal damage is causing oil to leak into the combustion chamber.
NHTSA · bollettino del costruttore10202685Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some vehicles may experience one of the following 2 symptoms, even though the windshield is clear. Under certain driving conditions, the Forward Sensing Camera (FSC) may detect a dirty windshield (not clear). NOTE FOR CUSTOMER: The FSC may not work properly under the conditions: The windshield is not clear. The FSC lens is not clear. Driving in heavy rain, dense fog or snow, or into the sun. Driving on a road with no or blurred road lane markings. When the windshield becomes foggy in the winter time or other cold weather conditions and LDWS/HBC warning lights turn on, drive with the defroster on for about 10 minutes. This will help clear the foggy windshield at the FSC.
NHTSA · bollettino del costruttore10185957Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Rear brake squeak noise during slow speed driving. Some vehicles may exhibit a squeak type noise from the rear brakes when driving at approximately 6-12 mph (10-20km/h) with or without light braking. The noise usually occurs when driving immediately after the parking brake is released. The noise may be caused by poor bake pad adhesive tape contact.
NHTSA · bollettino del costruttore10186329Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
If you experience issues with the current version of ID's such as missing tools or modules not showing after completing a network test, be advised that we are aware of these issues and are working to resolve them. As a counter measure, it is advised that you un-install ids and re-install version 103.00 and "do not update" until further notice.
NHTSA · bollettino del costruttore10185813Anni modello 2017Mostrato in inglese originale · traduzione in attesaVedi dettagli →
SiriusXM Traffic Plus and Travel Link are displayed with Mazda in-vehicle factory navigation systems. Both of these services provide information in the U.S. & Canada. NOTE: SiriusXM Traffic Plus and Travel Link subscription is free of charge for 3 years only if equipped with factory installed navigation system. NOTE: 2019 Mazda3 is not equipped with factory installed navigation system, however, it is available as a dealer installed accessory. SiriusXM Traffic Plus and Travel Link are available on the 2019 Mazda3 Preferred Package and above, as a paid subscription. Traffic Plus feature requires in-vehicle navigation SD card. SiriusXM Satellite Radio trial subscription is free of charge for 3 months.
NHTSA · bollettino del costruttore10154458Anni modello 2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Dal 1° maggio 2018, i veicoli prodotti in Giappone utilizzano dadi delle ruote esagonali da 17 mm invece che da 21 mm, con lo stesso passo di filettatura. Quando si installano nuovi dadi delle ruote o il kit accessorio Wheel Lock Set, assicurarsi di utilizzare il numero di parte corretto per il veicolo su cui si sta lavorando. NOTA: la Mazda3 prodotta in Messico non è interessata. Utilizzare il GEPC o il sito web degli accessori Mazda [MXConnect (dealers.mazdausa.com)] per consultare il numero di parte corretto per il veicolo su cui si sta lavorando.
NHTSA · bollettino del costruttore10153226Anni modello 2018Tradotto automaticamente · originale: ingleseVedi dettagli →
Some vehicles may experience a lack of power and the check engine light on with DTC P061B:00 and U0401:00 stored in the PCM memory when engine cranking is interrupted and on A/T vehicles, DTC U0442:00 is also stored. This concern most likely occurs when the brake pedal is released during engine cranking. DTC P061B:00 - [PCM] Internal control module torque calculation performance problem. DTC U0401:00 - Signal error from PCM DTC U0442:00 - [TCM] Invalid data received from PCM. Due to an improper control logic of the PCM, the engine torque calculation error detection is too sensitive. To eliminate this concern, the PCM software has been modified.
NHTSA · bollettino del costruttore10148004Anni modello 2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some vehicles may experience a lack of power and the check engine light on with DTC P061B:00 stored in the PCM memory when engine cranking is interrupted. This concern most likely occurs when the brake pedal is released during engine cranking. DTC P061B:00 - [PCM] Internal control module torque calculation performance problem. Due to an improper control logic of the PCM, the engine torque calculation error detection is too sensitive. To eliminate this concern, the PCM software has been modified.
NHTSA · bollettino del costruttore10144326Anni modello 2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some customers who drive at elevations higher than 3,300 ft (1,000 m) may complain of a shift shock felt when shifting into 3rd, 5th and/or Reverse with no AT related DTCs stored. The symptom can be temporarily repaired using the AT initial learning procedure, but may recur after multiple driving cycles. Applicable situations: Shifting up: 2-3 or 4-5 Shifting down: 4-3 or 6-5 NOTE: Shifting from 2-3 or 4-3 is more likely to be felt due to the gear ratio. Shifting into Reverse: D-R, N-R or P-R Improper control logic of the TCM may cause improper learning of R-3-5 brake engaging speed when the vehicle is driven at high elevations. To correct this issue, the control logic of the TCM has been modified.
NHTSA · bollettino del costruttore10143976Anni modello 2017Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The 2017 Mazda6 Touring trim does list the following mirror accessory: FRAMELESS AUTO-DIMMING REARVIEW MIRROR WITH HOMELINK Auto-Dimming Rearview Mirror With Compass. Auto-Dimming Rearview Mirror With Compass and Homelink The reason for this change is because the 2017 Mazda6 Touring now includes Smart City Brake Support (SCBS). The SCBS hardware does not support the installation of the accessory mirror.
NHTSA · bollettino del costruttore10142953Anni modello 2017Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some vehicles with accessory installed wheel locks may have had the wrong kit installed using a 21 mm wheel lock key. As of May 01, 2018, Japan produced vehicles use 17 mm hex lug nuts instead of 21 mm on the same size thread. Follow the instructions below to replace the wheel lock kit with a 17 mm wheel lock key. NOTE: The Mazda3 produced in Mexico is not affected
NHTSA · bollettino del costruttore10142535Anni modello 2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some customers who drive at elevations higher than 3,300 ft (1,000 m) may complain of a shift shock felt when shifting into 3rd, 5th and/or Reverse with no AT related DTCs stored. The symptom can be temporarily repaired using the AT initial learning procedure, but may recur after multiple driving cycles. Applicable situations: Shifting up: 2-3 or 4-5 Shifting down: 4-3 or 6-5 NOTE: Shifting from 2-3 or 4-3 is more likely to be felt due to the gear ratio. Shifting into Reverse: D-R, N-R or P-R Improper control logic of the TCM may cause improper learning of R-3-5 brake engaging speed when the vehicle is driven at high elevations. To correct this issue, the control logic of the TCM has been modified.
NHTSA · bollettino del costruttore10136779Anni modello 2017Mostrato in inglese originale · traduzione in attesaVedi dettagli →
MAZDA CONNECT SOFTWARE VERSION 59.00.545 AVAILABLE. An update to the MAZDA CONNECT system is now available for download from the Mazda Global Service Support (MGSS) system. The new version number is 59.00.545. Mazda Requests the MAZDA CONNECT system be updated on all new vehicle inventory and CPO vehicles ASAP. For CPO inventory vehicles out of warranty, for this software release only, you may use Dealer Self Authorization or DSM goodwill. Click on "Infotainment", then "MAZDA CONNECT Updates" to download it and update your USB drives. Also make sure to select "All Files" for "Save as type:". If left as "Compressed (zipped) Folder," the file will be saved as a ".zip" no matter what you use as an extension. DO NOT shut off the ignition or let it shut off at any time during the entire MAZDA CONNECT update process (both Failsafe and Reinstall), otherwise the CMU may be damaged and need to be replaced.
NHTSA · bollettino del costruttore10136768Anni modello 2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).