Engine crankshaft pulley failure (US safety investigation)
NHTSA, the US road safety agency, opened a preliminary evaluation (PE03058) into this problem on 17 December 2003 for 2000 models; it was closed on 22 April 2004 without a recall.
🔔 Crea un account gratuito per ricevere avvisi via e-mail su Mercedes-Benz Classe CL C215
Questo fascicolo raccoglie i difetti noti della Mercedes-Benz Classe CL C215, scritti e documentati dalla comunità. La lettura è libera; un account gratuito permette di contribuire. Un difetto ottiene il sigillo quando abbastanza contributori affidabili lo hanno convalidato.
NHTSA, the US road safety agency, opened a preliminary evaluation (PE03058) into this problem on 17 December 2003 for 2000 models; it was closed on 22 April 2004 without a recall.
Where a control unit coding was updated in a workshop between 3 December 2016 and 5 December 2016 the coding may not correspond to the specification and may trigger unplanned action in the vehicle. The safety and emissions systems may not react as design intent.
Certain vehicles equipped with Active Body Control (ABC) the sensors on the front struts may not operate within tolerances. As such, the sensor signal may not be accurately transmitted to the Electronic Control Unit (ECU). A variation in the transmitted values can result in one front strut adjusting to a value while the other does not adjust and presenting the driver with an uneven front suspension. This situation could have an effect on the vehicle's directional stability, possibly resulting in a vehicle crash with injuries or death. Correction: Dealers will inspect and replace affected AZ-sensors
Mercedes-benz is recalling my 2006-2008 m-class, r-class, my 2005-2009 slk-class, my 2005-2008 c-class, my 2003-2004 and 2006-2008 clk-class, my 2003-2008 e-class, my 2004 and 2008 cl-class, my 2008 cls-class, my 2004 and 2007-2008 s-class, my 2003 g-class, and my 2003-2004, 2006 and 2009 sl-class vehicles. A software calibration number (scn) coding received on the affected vehicles during a recent workshop visit was incorrect. Depending on the model year and model affected, the results of an incorrect scn coding can affect a number of vehicle safety and emission functions including the following types of functions: (1) the fuel gauge readings may be incorrect; (2) a stuck fuel-level sensor may not be displayed in the instrument cluster; (3) the obd system may cause the check engine light to illuminate incorrectly; and, (4) the speedometer may be out of tolerance.
Mercedes: Leakage at press-fit sleeve of abc pulsation damper. Models 215, and 220. Model years not given. *kb updated 12/30/13. *pe updated 12/12/14. *pe
Mercedes: Vehicle jerks during gearchange, hard 1-2 and 2-3 shifts, torque converter lockup clutch not engageable. Models 212, 216, 218, 221, 251, and 164. Model years not given. *kb updated 10/11/12. *pe
Mercedes: Airbag durability and reliability. Air bag srs control module (n2/2) does not have a set shelf life and will normally be reliable for the life of a vehicle. With 164, 216 221, 251 and newer, the airbag control unit can be reset five times. With modes 202, 210 and newer, the airbag control unit can be reset three times. Earlier models would have to have their airbag control unit and triggered restrain components changed only after an accident. No models or model years listed. *pe
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).