Questo fascicolo raccoglie i difetti noti della Mitsubishi i, scritti e documentati dalla comunità. La lettura è libera; un account gratuito permette di contribuire. Un difetto ottiene il sigillo quando abbastanza contributori affidabili lo hanno convalidato.
Difetti più gravi
Nessun difetto documentato per questa selezione.
RichiamoModeratoCambioUK
On affected vehicles a component within the transmission valve block may be defective. If the component fails the gear box may not select gears correctly. In the worst case scenario the driver may not be able to select reverse gear.
RichiamoModeratoMotoreUK
On Petrol versions (HA1W) the air bubble separation function of the condenser tank for the engine cooling system may not function properly when the engine is running at high RPM. This could result in coolant overflowing from the condenser tank. If the coolant overflows repeatedly and use of the vehicle continues without sufficient coolant engine overheating could occur. In the worst case the engine could stall/heat seize and cannot be restarted
RichiamoModeratoFreniUK
It has been identified that due to the formation of rust between the manual control shaft and the gear inhibitor switch the transmission may not move to the park position even though this may have been selected. As a result it may be impossible to start the vehicle additionally the vehicle may move unexpectedly whilst in park if the parking brake has not been applied.
Ultimi bollettini tecnici
Nessun bollettino tecnico trovato per questo modello.
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0).