En raison d’une erreur dans le processus de pliage du coussin gonflable du conducteur, le bouclier thermique peut ne pas se déplacer complètement autour du gonfleur lorsque l’airbag est activé. par conséquent, le gaz chaud peut directement entrer en contact avec le panneau avant de l’airbag, causant des dommages de brûlure au matériau du sac. en conséquence, l’airbag peut se déchirer pendant l’inflation réduisant sa fonction protectrice.
Safety Gate · UE · RappelConso · Francia26 mar 2021a12/00391/21Anni modello 2019Mostrato in francese originale · traduzione in attesaVedi dettagli →
In the event that the driver airbag is deployed during a frontal impact small holes may occur on the surface of the airbag. The holes are caused by high temperature gases from the airbag inflator exhausting directly onto the surface of the airbag material. The high temperature gas/airbag material may contact the drivers skin. The deployment performance of the driver airbag is not affected.
DVSA · Regno Unito25 feb 2013R/2013/019Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
null In the event that the driver's airbag is deployed during a frontal impact, small holes may appear on the surface of the airbag. The holes are caused by high temperature gas from the airbag inflator exhausting directly onto the surface of the airbag material. Contact of the high temperature gas / airbag material with the driver’s skin can cause burns.
Safety Gate · UE20 feb 2013A12/0243/13Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Sui veicoli interessati, la cintura di sicurezza anteriore potrebbe essere stata danneggiata accidentalmente durante la preparazione dei componenti per il montaggio.
DVSA · Regno Unito7 apr 2025R/2025/118Anni modello 2024Tradotto automaticamente · originale: ingleseVedi dettagli →
Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch actuation rod can catch on this chamfer, preventing its upwards movement.As a result the rear seat back may not be securely latched when returned to its upright position after folding, and the occupant of the rear seat and any items stored in the luggage compartment may not be correctly restrained in the event of an accident, increasing the risk of injury.
Safety Gate · UE12 ott 2021A12/01430/21Anni modello 2019–2020Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, the rear seat latch strikers (which secure the seat backrest in the upright position) may have been manufactured incorrectly. As a result, the rear seat back strikers may deform during a frontal vehicle crash, which could increase the risk of injury to a rear seat occupant. Correction: Dealers will replace the rear seat latch strikers with updated versions.
Transport Canada12 lug 20122012211Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Nissan is recalling certain model year 2012 juke vehicles manufactured from february 3, 2012, through may 26, 2012. Due to an incomplete weld penetration, the rear seat back striker may partially separate in a crash.
NHTSA · Stati Uniti12 lug 201212V328000Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).