Il generatore di gas degli airbag lato passeggero potrebbe essere difettoso. Quando l'airbag viene attivato, possono essere rilasciati frammenti metallici, con il rischio di causare lesioni agli occupanti.
On certain vehicles equipped with a mechanical key ignition system, a spring in the ignition switch could wear and break. This may allow the ignition key to inadvertently move from the ON position to the accessory (ACC) position while driving, causing the engine to shut off and the airbag system to lose power. The resulting loss of motive power, and change in steering and brake forces could increase the risk of a crash causing injury and/or damage to property. Additionally, in the event of a crash, this may also cause the airbags not to function. Correction: Dealers will inspect the lot number of the ignition switch, and replace it with a new one if it is affected. Note: Until the correction is performed, owners are advised to remove all objects from the ignition key ring, such as additional keys, key chains, etc.
Transport Canada22 ago 20182018440Anni modello 2017–2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, the inflator diffuser installed in certain side curtain air bag modules may not have been manufactured correctly. If the vehicle were involved in a crash that warranted side curtain airbag deployment, this could potentially lead to the diffuser detaching. If the diffuser were to detach, it could become a projectile in the occupant compartment, which could result in the side curtain airbag to not fully inflate. Both of these conditions could increase the risk of injury in a crash. Correction: Dealers will replace the side curtain air bag modules.
Transport Canada22 dic 20172017662Anni modello 2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Nissan North America, Inc. (Nissan) is recalling certain 2018 Nissan Versa Note vehicles. During deployment of the side curtain air bag, a component of the air bag inflator may detach. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standards (FMVSS) number 214, "Side Impact Protection," and 226, "Ejection Mitigation."
NHTSA · Stati Uniti20 dic 201717V837000Anni modello 2018Mostrato in inglese originale · traduzione in attesaVedi dettagli →
I veicoli in questione sono dotati di gonfiatori anteriori per il bagno a aria che potrebbero essere stati assemblati con propellente prodotto in modo improprio. Questo potrebbe causare la rottura dell'inflatore e l'apertura dell'airbag anteriore in caso di incidente. Questo potrebbe aumentare il rischio di lesioni all'occupante.
DVSA · Regno Unito28 nov 2017R/2017/226Anni modello 2005–2013Tradotto automaticamente · originale: ingleseVedi dettagli →
null In the event of deployment of the passenger airbag, the inflator could rupture causing metal fragments to be produced which could cause injury to the occupants of the vehicle.
Safety Gate · UE26 lug 2017A12/1033/17Anni modello 2005–2013Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, the ring plate that secures the frontal passenger airbag cushion to the assembly housing may not have sufficient yield strength due to a manufacturing defect. This could cause the airbag cushion to separate from the ring plate when the airbag is deployed which could increase the risk of injury. Correction: Dealers will replace the front passenger side airbag module.
Transport Canada26 apr 20172017227Anni modello 2017Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Nissan North America, Inc. (Nissan) is recalling certain 2017 Versa, and Versa Note vehicles. The ring plate that secures the air bag cushion to the passenger frontal air bag assembly may fail, possibly causing the air bag to deploy improperly in the event of a crash.
NHTSA · Stati Uniti26 apr 201717V275000Anni modello 2017Mostrato in inglese originale · traduzione in attesaVedi dettagli →
null The chemical composition in the gas generator of the curtain (head-protection) airbag may not be correct. It is therefore possible that, in the event of a side-on collision, the curtain airbag may not be deployed, and passengers in the vehicle may be injured.
Safety Gate · UE22 feb 2017A12/0237/17Anni modello 2016Mostrato in inglese originale · traduzione in attesaVedi dettagli →
null Activation of the driver's airbag may cause an abnormal increase in the internal pressure of the gas inflator and, in extreme cases, cause the casing of the gas inflator to break. This means that there is an increased risk of injury for the occupants.
Safety Gate · UE3 giu 2016A12/0722/16Anni modello 2012–2013Mostrato in inglese originale · traduzione in attesaVedi dettagli →
In the event of driver�s airbag deployment the internal pressure of inflator may increase abnormally and in an extreme case cause the driver�s airbag inflator casing to rupture. In an extreme case this may cause a scattering of metal fragments.
DVSA · Regno Unito15 feb 2016R/2015/256Anni modello 2005–2011Mostrato in inglese originale · traduzione in attesaVedi dettagli →
null In the event of deployment of the driver’s airbag, the internal pressure of the inflator may increase abnormally and, in extreme cases, cause the driver’s airbag inflator casing to rupture.
Safety Gate · UE22 dic 2015A12/1759/15Anni modello 2005–2011Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The lower pinion needle bearing may have been omitted during manufacture of the steering gear due to insufficient controls in the suppliers manufacturing process. It is possible the pinion may disengage from the steering gear with loss of steering control.
DVSA · Regno Unito4 ago 2015R/2015/135Anni modello 2008Mostrato in inglese originale · traduzione in attesaVedi dettagli →
null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this condition, the pinion may disengage causing loss of steering control.
Safety Gate · UE3 lug 2015A12/0872/15Anni modello 2003–2008Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Nel sistema elettrico (modulo di controllo della carrozzeria), a causa di un programma di controllo non appropriato, il tempo di accensione della spia di funzionamento della funzione di blocco automatico in uscita dal veicolo non soddisfa i requisiti dei standard di sicurezza.
jp3 ott 20241155450Anni modello 2021–2024Tradotto automaticamente · originale: giapponeseVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0).