The short section of high pressure fuel hose between the fuel rail and the fuel pressure regulator, which runs alongside the intake manifold, may be subject to hardening. In the event that this line does harden, fuel leaks could develop between the hose and metal pipe fittings. Leaking fuel could ignite on the hot exhaust system and lead to an engine compartment fire. Correction: Fuel hose will be replaced on 924s, 944 and 944 turbo vehicles and the fuel hose and fuel rail will be replaced on 944s vehicles.
Transport Canada4 apr 19901990051Anni modello 1987–1988Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The hose material used in the short section of the high pressure fuel line hose, between the fuel rail and fuel pressure regulator, is subject to hardening, and could cause fuel leaks between the hose and the metal pipe fittings.
NHTSA · Stati Uniti2 apr 199090V061000Anni modello 1987–1988Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The rear spring plates (radius arms) on these vehicles may have been improperly tempered by supplier. Improperly hardened spring plates could crack and possibly break . This could affect lateral guidance of the corresponding rear wheel resulting in loss of vehicle control.
Transport Canada9 ott 19851985110Anni modello 1982Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Rear spring plates may not have been tempered and are not of the proper hardness value. Consequence of defect: The plates could crack and/or break, affect lateral guidance of the rear wheel, and result in loss of control of the car which may cause an accident.
NHTSA · Stati Uniti26 lug 198585V095000Anni modello 1982Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The rear seat belts do not include emergency-locking or automatic-locking retractors. The belts do not comply with federal motor vehicle safety standard no. 208, "occupant crash protection".
NHTSA · Stati Uniti26 ott 198383V111000Anni modello 1982Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The bridge for the seat belt locking (inertia retractor) mechanism on one suppliers belts may have been improperly crimped. This condition may result in a non-locking retractor.
Transport Canada28 set 19791979167Anni modello 1980Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The ponte nel meccanismo di blocco della fibbia della cintura di sicurezza del sedile anteriore potrebbe essere stato piegato in modo non corretto. La fibbia potrebbe non tenere correttamente e si sgancerà se vengono applicate forze estreme.
NHTSA · Stati Uniti27 set 197979V222000Anni modello 1980Tradotto automaticamente · originale: ingleseVedi dettagli →
Vehicles were inadvertently equipped with a 1979 model vehicle emission control information label which contains an incorrect vacuum hose touting diagram. These vehicles do not comply with the labelling requirements of canada motor vehicle safety standard 1101 - emission devices.
Transport Canada6 mag 19801980070Anni modello 1980Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).