The short section of high pressure fuel hose between the fuel rail and the fuel pressure regulator, which runs alongside the intake manifold, may be subject to hardening. In the event that this line does harden, fuel leaks could develop between the hose and metal pipe fittings. Leaking fuel could ignite on the hot exhaust system and lead to an engine compartment fire. Correction: Fuel hose will be replaced on 924s, 944 and 944 turbo vehicles and the fuel hose and fuel rail will be replaced on 944s vehicles.
Transport Canada4 apr 19901990051Anni modello 1985–1988Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The hose material used in the short section of the high pressure fuel line hose, between the fuel rail and fuel pressure regulator, is subject to hardening, and could cause fuel leaks between the hose and the metal pipe fittings.
NHTSA · Stati Uniti2 apr 199090V061000Anni modello 1985–1988Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The protective sleeve covering of the return fuel hose between the pressure regulator and fuel return pipe was shortened leaving part of the hose exposed. In some instances this part of the hose becomes kinked due to the engine compartment heat and/or the routing of the hose. Consequence of defect: If this occurs it could restrict and damage the return fuel hose which could lead to fuel leakage and cause an engine compartment fire.
NHTSA · Stati Uniti12 giu 198686V077000Anni modello 1986Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fuel hose may be damaged due to too much pressure in crimping the hose end fitting. Consequence of defect: A fuel leak could develop which could cause a loss in system pressure and engine stalling. Also, fuel vapors in the engine compartment could be ignited by a spark and cause a fire.
NHTSA · Stati Uniti9 apr 198585V039000Anni modello 1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The fuel supply hose to the pressure damper in the engine compartment may develop a leak between the flex hose and the threaded connector due to improper crimping of the fitting. This will cause the fuel pressure in the injection system to drop, resulting in engine stalling. A stalled vehicle could pose a threat to traffic safety.
Transport Canada12 apr 19851985040Anni modello 1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).